<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Help" VALUE="" ANCHOR="0000164" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Messaging Subsystem" VALUE="" ANCHOR="0000165" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec" VALUE="" ANCHOR="0000167" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\InstalledApps" VALUE="" ANCHOR="0000168" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus" VALUE="" ANCHOR="0000169" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Auto-Protect" VALUE="" ANCHOR="0000170" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Clinic" VALUE="" ANCHOR="0000171" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Install" VALUE="" ANCHOR="0000172" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Virus Defs" VALUE="" ANCHOR="0000173" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities" VALUE="" ANCHOR="0000174" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Install" VALUE="" ANCHOR="0000175" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton Disk Doctor" VALUE="" ANCHOR="0000177" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton Image" VALUE="" ANCHOR="0000178" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton Protection" VALUE="" ANCHOR="0000179" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton Rescue" VALUE="" ANCHOR="0000180" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton Speed Disk" VALUE="" ANCHOR="0000182" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton System Doctor" VALUE="" ANCHOR="0000183" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton UnErase" VALUE="" ANCHOR="0000184" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton System Doctor\General\Config" VALUE="" ANCHOR="0000905" OS="95" >
<!-- NortonRegEdit KEY="My Computer" VALUE="" ANCHOR="0000912" OS="95" >
<!-- NortonRegEdit KEY="Ini Files" VALUE="" ANCHOR="0000913" OS="95" >
<!-- NortonRegEdit KEY="Network Neighborhood" VALUE="" ANCHOR="0000914" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\System Information" VALUE="" ANCHOR="0000185" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\SharedUsage" VALUE="" ANCHOR="0000186" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\InstalledFiles" VALUE="" ANCHOR="0000187" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\MediaProperties" VALUE="" ANCHOR="0000188" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\PwdProvider" VALUE="" ANCHOR="0000189" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ServiceProvider" VALUE="" ANCHOR="0000190" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock" VALUE="" ANCHOR="0000194" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\InstallLocationsMRU" VALUE="" ANCHOR="0000195" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Config\?\System\CurrentControlSet\Control\Print\Printers" VALUE="" ANCHOR="0000201" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Explorer\Tips" VALUE="Show" ANCHOR="0000205" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\Desktop\NameSpace\{645FF040-5081-101B-9F08-00AA002F954E}" VALUE="" ANCHOR="0000025" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\Desktop\NameSpace\{FBF23B42-E3F0-101B-8488-00AA003E56F8}" VALUE="" ANCHOR="0000026" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\Desktop\NameSpace" VALUE="" ANCHOR="0000027" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" VALUE="NoDesktop" ANCHOR="0000028" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities" VALUE="DisableSplashScreen" ANCHOR="0000029" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion" VALUE="RegisteredOwner" ANCHOR="0000032" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion" VALUE="RegisteredOrganization" ANCHOR="0000033" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Open\Command" VALUE="?" ANCHOR="0000034" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" VALUE="NoStartBanner" ANCHOR="0000035" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}" VALUE="?" ANCHOR="0000036" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\*\QuickView" VALUE="?" ANCHOR="0000037" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\directory\shell" VALUE="" ANCHOR="0000038" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{00020D75-0000-0000-C000-000000000046}\shell" VALUE="" ANCHOR="0000039" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{208D2C60-3AEA-1069-A2D7-08002B30309D}\shell" VALUE="" ANCHOR="0000040" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell" VALUE="" ANCHOR="0000041" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\shell" VALUE="" ANCHOR="0000042" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders" VALUE="" ANCHOR="0000043" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" VALUE="" ANCHOR="0000044" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" VALUE="Recent" ANCHOR="0000045" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum\ESDI" VALUE="" ANCHOR="0000046" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum\FLOP" VALUE="" ANCHOR="0000047" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum\ISAPNP" VALUE="" ANCHOR="0000048" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum\Monitor" VALUE="" ANCHOR="0000049" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum\Network" VALUE="" ANCHOR="0000050" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum\Root" VALUE="" ANCHOR="0000051" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" VALUE="" ANCHOR="0000052" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMRU" VALUE="" ANCHOR="0000053" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{00020D75-0000-0000-C000-000000000046}\DefaultIcon" VALUE="?" ANCHOR="0000054" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{208D2C60-3AEA-1069-A2D7-08002B30309D}\DefaultIcon" VALUE="?" ANCHOR="0000055" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\DefaultIcon" VALUE="?" ANCHOR="0000056" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\DefaultIcon" VALUE="?" ANCHOR="0000057" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\DefaultIcon" VALUE="Empty" ANCHOR="0000058" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\DefaultIcon" VALUE="Full" ANCHOR="0000059" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Paint.Picture\DefaultIcon" VALUE="?" ANCHOR="0000060" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Directory\shell\find\ddeexec" VALUE="?" ANCHOR="0000061" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" VALUE="NoDriveTypeAutoRun" ANCHOR="0000062" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes" VALUE="" ANCHOR="0000063" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet" VALUE="" ANCHOR="0000064" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control" VALUE="" ANCHOR="0000065" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services" VALUE="" ANCHOR="0000066" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\ComputerName" VALUE="" ANCHOR="0000067" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\FileSystem" VALUE="" ANCHOR="0000068" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\IDConfigDB" VALUE="" ANCHOR="0000069" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\keyboard layouts" VALUE="" ANCHOR="0000070" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\MediaResources" VALUE="" ANCHOR="0000071" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\NetworkProvider" VALUE="" ANCHOR="0000072" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\Nls" VALUE="" ANCHOR="0000073" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\PerfStats" VALUE="" ANCHOR="0000074" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\Print" VALUE="" ANCHOR="0000075" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\Print\Environments" VALUE="" ANCHOR="0000076" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\Print\Monitors" VALUE="" ANCHOR="0000077" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\Print\Printers" VALUE="" ANCHOR="0000078" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\Print\Providers" VALUE="" ANCHOR="0000079" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\SessionManager" VALUE="" ANCHOR="0000080" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\TimeZoneInformation" VALUE="" ANCHOR="0000081" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\Update" VALUE="" ANCHOR="0000082" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\VMM32Files" VALUE="" ANCHOR="0000083" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" VALUE="DisplayName" ANCHOR="0000084" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" VALUE="UninstallString" ANCHOR="0000085" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths" VALUE="" ANCHOR="0000086" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Config\?" VALUE="" ANCHOR="0000087" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Config\?\Display" VALUE="" ANCHOR="0000088" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Config\?\Display\Fonts" VALUE="" ANCHOR="0000089" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Config\?\Display\Settings" VALUE="Mouse Trails" ANCHOR="0000090" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA\Config Manager" VALUE="" ANCHOR="0000091" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA\PerfStats" VALUE="" ANCHOR="0000092" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Config\?\Display\Settings" VALUE="" ANCHOR="0000093" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDLLs" VALUE="" ANCHOR="0000094" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Fonts" VALUE="" ANCHOR="0000095" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Fontsize" VALUE="" ANCHOR="0000097" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\FS Templates" VALUE="" ANCHOR="0000098" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft" VALUE="" ANCHOR="0000099" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows" VALUE="" ANCHOR="0000100" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion" VALUE="" ANCHOR="0000101" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?" VALUE="" ANCHOR="0000102" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software" VALUE="" ANCHOR="0000103" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\AppEvents" VALUE="" ANCHOR="0000104" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel" VALUE="" ANCHOR="0000105" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\keyboard layout" VALUE="" ANCHOR="0000106" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Network" VALUE="" ANCHOR="0000107" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Controls Folder" VALUE="" ANCHOR="0000108" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ICM" VALUE="" ANCHOR="0000109" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Detect" VALUE="" ANCHOR="0000110" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer" VALUE="" ANCHOR="0000111" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Extensions" VALUE="" ANCHOR="0000112" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\MS-DOS Emulation" VALUE="" ANCHOR="0000113" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Network" VALUE="" ANCHOR="0000114" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Nls" VALUE="" ANCHOR="0000115" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Network\LanMan" VALUE="" ANCHOR="0000116" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Network" VALUE="HideSharePwds" ANCHOR="0000117" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies" VALUE="" ANCHOR="0000119" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ProfileList" VALUE="" ANCHOR="0000120" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ProfileList\?" VALUE="" ANCHOR="0000121" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run" VALUE="" ANCHOR="0000122" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce" VALUE="" ANCHOR="0000123" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunServices" VALUE="" ANCHOR="0000124" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunServicesOnce" VALUE="" ANCHOR="0000125" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup" VALUE="" ANCHOR="0000126" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Shell Extensions" VALUE="" ANCHOR="0000127" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\desktop" VALUE="" ANCHOR="0000918" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ShellScrap" VALUE="" ANCHOR="0000128" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Time Zones" VALUE="" ANCHOR="0000129" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Time Zones" VALUE="?" ANCHOR="0000130" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Time Zones\?" VALUE="" ANCHOR="0000131" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Time Zones\?" VALUE="Display" ANCHOR="0000132" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Time Zones\?" VALUE="Dlt" ANCHOR="0000133" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Time Zones\?" VALUE="Std" ANCHOR="0000134" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Time Zones\?" VALUE="MapID" ANCHOR="0000135" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Time Zones\?" VALUE="TZI" ANCHOR="0000136" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NetDDE" VALUE="" ANCHOR="0000137" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Arbitrators" VALUE="" ANCHOR="0000138" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class" VALUE="" ANCHOR="0000139" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSNP32" VALUE="" ANCHOR="0000140" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NWNP32" VALUE="" ANCHOR="0000141" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD" VALUE="" ANCHOR="0000142" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RemoteAccess" VALUE="" ANCHOR="0000143" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE" VALUE="" ANCHOR="0000001" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS" VALUE="" ANCHOR="0000002" OS="95" >
<!-- NortonRegEdit KEY="HKEY_CURRENT_CONFIG" VALUE="" ANCHOR="0000003" OS="95" >
<!-- NortonRegEdit KEY="HKEY_CLASSES_ROOT" VALUE="" ANCHOR="0000004" OS="95" >
<!-- NortonRegEdit KEY="HKEY_CURRENT_USER" VALUE="" ANCHOR="0000005" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA" VALUE="" ANCHOR="0000006" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Config" VALUE="" ANCHOR="0000007" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum" VALUE="" ANCHOR="0000008" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Hardware" VALUE="" ANCHOR="0000009" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Network" VALUE="" ANCHOR="0000010" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Security" VALUE="" ANCHOR="0000011" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE" VALUE="" ANCHOR="0000012" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System" VALUE="" ANCHOR="0000013" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\.Default" VALUE="" ANCHOR="0000014" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\desktop\WindowMetrics" VALUE="MinAnimate" ANCHOR="0000015" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\FileSystem" VALUE="NameNumericTail" ANCHOR="0000016" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\lnkfile" VALUE="IsShortcut" ANCHOR="0000017" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\piffile" VALUE="IsShortcut" ANCHOR="0000018" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" VALUE="NoRun" ANCHOR="0000019" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" VALUE="NoNetHood" ANCHOR="0000020" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\desktop" VALUE="MenuShowDelay" ANCHOR="0000021" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup" VALUE="SourcePath" ANCHOR="0000022" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\Desktop\NameSpace\{00020D75-0000-0000-C000-000000000046}" VALUE="" ANCHOR="0000023" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\Desktop\NameSpace\{00028B00-0000-0000-C000-000000000046}" VALUE="" ANCHOR="0000024" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\ComputerName\ComputerName" VALUE="" ANCHOR="0000210" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\ComputerName\ComputerName" VALUE="ComputerName" ANCHOR="0000212" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\SYMFSV4\SymEvent\Exception" VALUE="" ANCHOR="0000221" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\SYMFSV4\Undo" VALUE="FileName" ANCHOR="0000225" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\SYMFSV4\Undo\Exception" VALUE="" ANCHOR="0000226" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Hardware\Resourcemap" VALUE="" ANCHOR="0000299" OS="95" >
<!-- NortonRegEdit KEY="control.ini\ScreenSaver.*" VALUE="Password" ANCHOR="0000606" OS="95" >
<!-- NortonRegEdit KEY="progman.ini" VALUE="" ANCHOR="0000607" OS="95" >
<!-- NortonRegEdit KEY="progman.ini\Groups" VALUE="" ANCHOR="0000608" OS="95" >
<!-- NortonRegEdit KEY="progman.ini\restrictions" VALUE="" ANCHOR="0000609" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Unknown" VALUE="" ANCHOR="0000434" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NetBIOS" VALUE="" ANCHOR="0000449" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NetDDE" VALUE="" ANCHOR="0000450" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NetLogon" VALUE="" ANCHOR="0000455" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Ntfs" VALUE="" ANCHOR="0000456" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Null" VALUE="" ANCHOR="0000457" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\qv" VALUE="" ANCHOR="0000460" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Rdr" VALUE="" ANCHOR="0000461" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Replicator" VALUE="" ANCHOR="0000462" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\SessionManager\AppPatches" VALUE="" ANCHOR="0000507" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\System" VALUE="SerialIgnoreDSR" ANCHOR="0000919" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\System" VALUE="SerialUse56000" ANCHOR="0000920" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RCPLOCATOR" VALUE="" ANCHOR="0000463" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Serial" VALUE="" ANCHOR="0000467" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Sgikbmou" VALUE="" ANCHOR="0000469" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Simbad" VALUE="" ANCHOR="0000470" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Sparrow" VALUE="" ANCHOR="0000471" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Spock" VALUE="" ANCHOR="0000473" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Srv" VALUE="" ANCHOR="0000474" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\T128" VALUE="" ANCHOR="0000475" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\T13B" VALUE="" ANCHOR="0000476" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Ultra124" VALUE="" ANCHOR="0000477" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\UPS" VALUE="" ANCHOR="0000478" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\wdvga" VALUE="" ANCHOR="0000481" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Xga" VALUE="" ANCHOR="0000484" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\SessionManager\KnownDLLs" VALUE="" ANCHOR="0000512" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\SessionManager\WarnVerDLLs" VALUE="" ANCHOR="0000513" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator" VALUE="" ANCHOR="0000520" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\Indexing" VALUE="" ANCHOR="0000523" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\Install" VALUE="" ANCHOR="0000524" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator" VALUE="" ANCHOR="0000529" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Windows" VALUE="Directory" ANCHOR="0000530" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Windows" VALUE="SystemDirectory" ANCHOR="0000531" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\SessionManager" VALUE="SubSystems" ANCHOR="0000532" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\WOW" VALUE="KnownDLLs" ANCHOR="0000534" OS="95" >
<!-- NortonRegEdit KEY="win.ini\colors" VALUE="background" ANCHOR="0000539" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Hardware\Devicemap\AtDisk\Controllerx\Disky" VALUE="" ANCHOR="0000540" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="" ANCHOR="0000541" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{85BBD920-42A20-1069-A2E4-08002B30309D}\DefaultIcon" VALUE="" ANCHOR="0000486" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA\PerfStats\StartSrv" VALUE="" ANCHOR="0000487" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA\PerfStats\StartStat" VALUE="" ANCHOR="0000488" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA\PerfStats\StatData" VALUE="" ANCHOR="0000489" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA\PerfStats\StopSrv" VALUE="" ANCHOR="0000490" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA\PerfStats\StopStat" VALUE="" ANCHOR="0000491" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA\Config Manager\Enum" VALUE="" ANCHOR="0000492" OS="95" >
<!-- NortonRegEdit KEY="HKEY_DYN_DATA\Security" VALUE="" ANCHOR="0000494" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{21EC2020-3AEA-1069-A2DD-08002B30309D}\DefaultIcon" VALUE="" ANCHOR="0000495" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{992CFFA0-F557-101A-88EC-00DD010CCC48}\DefaultIcon" VALUE="" ANCHOR="0000496" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{2227A280-3AEA-1069-A2DE-08002B30309D}\DefaultIcon" VALUE="" ANCHOR="0000497" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{FBF23B42-E3F0-101B-8488-00AA003E56F8}\DefaultIcon" VALUE="" ANCHOR="0000498" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\SessionManager\CheckBadApps" VALUE="" ANCHOR="0000508" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\SessionManager\CheckVerDLLs" VALUE="" ANCHOR="0000509" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\SessionManager\HackIniFiles" VALUE="" ANCHOR="0000510" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\SessionManager\Known16DLLs" VALUE="" ANCHOR="0000511" OS="95" >
<!-- NortonRegEdit KEY="system.ini\drivers" VALUE="" ANCHOR="0000547" OS="95" >
<!-- NortonRegEdit KEY="system.ini\keyboard" VALUE="" ANCHOR="0000550" OS="95" >
<!-- NortonRegEdit KEY="system.ini\mci" VALUE="" ANCHOR="0000551" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="" ANCHOR="0000554" OS="95" >
<!-- NortonRegEdit KEY="win.ini\compatibility" VALUE="" ANCHOR="0000562" OS="95" >
<!-- NortonRegEdit KEY="win.ini\desktop" VALUE="" ANCHOR="0000563" OS="95" >
<!-- NortonRegEdit KEY="win.ini\devices" VALUE="" ANCHOR="0000564" OS="95" >
<!-- NortonRegEdit KEY="win.ini\embedding" VALUE="" ANCHOR="0000565" OS="95" >
<!-- NortonRegEdit KEY="win.ini\extensions" VALUE="" ANCHOR="0000566" OS="95" >
<!-- NortonRegEdit KEY="win.ini\fonts" VALUE="" ANCHOR="0000567" OS="95" >
<!-- NortonRegEdit KEY="win.ini\FontSubstitutes" VALUE="" ANCHOR="0000568" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="" ANCHOR="0000569" OS="95" >
<!-- NortonRegEdit KEY="win.ini\mci extensions" VALUE="" ANCHOR="0000570" OS="95" >
<!-- NortonRegEdit KEY="win.ini\network" VALUE="" ANCHOR="0000571" OS="95" >
<!-- NortonRegEdit KEY="win.ini\ports" VALUE="" ANCHOR="0000572" OS="95" >
<!-- NortonRegEdit KEY="win.ini\PrinterPorts" VALUE="" ANCHOR="0000573" OS="95" >
<!-- NortonRegEdit KEY="win.ini\programs" VALUE="" ANCHOR="0000574" OS="95" >
<!-- NortonRegEdit KEY="win.ini\Sounds" VALUE="" ANCHOR="0000575" OS="95" >
<!-- NortonRegEdit KEY="win.ini\TrueType" VALUE="" ANCHOR="0000576" OS="95" >
<!-- NortonRegEdit KEY="winfile.ini\AddOns" VALUE="" ANCHOR="0000597" OS="95" >
<!-- NortonRegEdit KEY="winfile.ini\Settings" VALUE="" ANCHOR="0000599" OS="95" >
<!-- NortonRegEdit KEY="dosapp.ini" VALUE="" ANCHOR="0000600" OS="95" >
<!-- NortonRegEdit KEY="control.ini\Color Schemes" VALUE="color scheme name" ANCHOR="0000601" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist\History Lists\?" VALUE="Documents" ANCHOR="0000602" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist\History Lists\?" VALUE="Folders" ANCHOR="0000603" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FILEMGR\FMDirTree\Hist" VALUE="" ANCHOR="0000604" OS="95" >
<!-- NortonRegEdit KEY="control.ini\ScreenSaver.*" VALUE="PWProtected" ANCHOR="0000605" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="" ANCHOR="0000577" OS="95" >
<!-- NortonRegEdit KEY="win.ini\Windows Help" VALUE="" ANCHOR="0000578" OS="95" >
<!-- NortonRegEdit KEY="control.ini\Color Schemes" VALUE="" ANCHOR="0000579" OS="95" >
<!-- NortonRegEdit KEY="control.ini\Current" VALUE="" ANCHOR="0000580" OS="95" >
<!-- NortonRegEdit KEY="control.ini\Custom Colors" VALUE="" ANCHOR="0000581" OS="95" >
<!-- NortonRegEdit KEY="control.ini\Drivers.Desc" VALUE="" ANCHOR="0000582" OS="95" >
<!-- NortonRegEdit KEY="control.ini\Installed" VALUE="" ANCHOR="0000583" OS="95" >
<!-- NortonRegEdit KEY="control.ini\MMCPL" VALUE="" ANCHOR="0000584" OS="95" >
<!-- NortonRegEdit KEY="control.ini\Patterns" VALUE="" ANCHOR="0000585" OS="95" >
<!-- NortonRegEdit KEY="control.ini\ScreenSaver.*" VALUE="" ANCHOR="0000586" OS="95" >
<!-- NortonRegEdit KEY="control.ini\Userinstallable.drivers" VALUE="" ANCHOR="0000587" OS="95" >
<!-- NortonRegEdit KEY="system.ini\Netware" VALUE="" ANCHOR="0000588" OS="95" >
<!-- NortonRegEdit KEY="win.ini\colors" VALUE="" ANCHOR="0000595" OS="95" >
<!-- NortonRegEdit KEY="progman.ini\Settings" VALUE="" ANCHOR="0000610" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FILEMGR\FMDirTree" VALUE="" ANCHOR="0000612" OS="95" >
<!-- NortonRegEdit KEY="win.ini\desktop" VALUE="GridGranularity" ANCHOR="0000613" OS="95" >
<!-- NortonRegEdit KEY="win.ini\desktop" VALUE="Pattern" ANCHOR="0000614" OS="95" >
<!-- NortonRegEdit KEY="win.ini\desktop" VALUE="TileWallpaper" ANCHOR="0000615" OS="95" >
<!-- NortonRegEdit KEY="win.ini\desktop" VALUE="Wallpaper" ANCHOR="0000616" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist" VALUE="Menu Types" ANCHOR="0000618" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist" VALUE="Startup Options" ANCHOR="0000619" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist\Commands" VALUE="" ANCHOR="0000620" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\System" VALUE="TCPIPConnectIfUnknown" ANCHOR="0000921" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist\Commands\Menu" VALUE="" ANCHOR="0000621" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist\Commands\Predefined" VALUE="" ANCHOR="0000622" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist\Commands" VALUE="Menu Separator" ANCHOR="0000623" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist\Dialogs" VALUE="" ANCHOR="0000624" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FILEMGR\Settings" VALUE="" ANCHOR="0000625" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Menu Companions\1.0" VALUE="" ANCHOR="0000626" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Menu Companions\1.0\Navigator Run" VALUE="" ANCHOR="0000627" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Menu Companions\1.0\Start Menu" VALUE="" ANCHOR="0000628" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iCountry" ANCHOR="0000629" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iCurrDigits" ANCHOR="0000630" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iCurrency" ANCHOR="0000631" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iDate" ANCHOR="0000632" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iDigits" ANCHOR="0000633" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iLZero" ANCHOR="0000634" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iMeasure" ANCHOR="0000635" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iNegCurr" ANCHOR="0000636" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iTime" ANCHOR="0000638" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="iTLZero" ANCHOR="0000639" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="s1159" ANCHOR="0000641" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="s2359" ANCHOR="0000642" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="sCountry" ANCHOR="0000643" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="sCurrency" ANCHOR="0000644" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="sDecimal" ANCHOR="0000645" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="sLanguage" ANCHOR="0000646" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="sList" ANCHOR="0000647" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="sLongDate" ANCHOR="0000648" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="sShortDate" ANCHOR="0000649" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="sThousand" ANCHOR="0000650" OS="95" >
<!-- NortonRegEdit KEY="win.ini\intl" VALUE="sTime" ANCHOR="0000651" OS="95" >
<!-- NortonRegEdit KEY="win.ini\ports" VALUE="COMport-number" ANCHOR="0000652" OS="95" >
<!-- NortonRegEdit KEY="win.ini\ports" VALUE="EPT:" ANCHOR="0000653" OS="95" >
<!-- NortonRegEdit KEY="win.ini\ports" VALUE="FILE:" ANCHOR="0000654" OS="95" >
<!-- NortonRegEdit KEY="win.ini\ports" VALUE="filename" ANCHOR="0000655" OS="95" >
<!-- NortonRegEdit KEY="win.ini\ports" VALUE="LPTport-number:" ANCHOR="0000656" OS="95" >
<!-- NortonRegEdit KEY="win.ini\ports" VALUE="LPTport-number.DOS" ANCHOR="0000657" OS="95" >
<!-- NortonRegEdit KEY="win.ini\TrueType" VALUE="OutlineThreshold" ANCHOR="0000658" OS="95" >
<!-- NortonRegEdit KEY="win.ini\TrueType" VALUE="TTEnable" ANCHOR="0000659" OS="95" >
<!-- NortonRegEdit KEY="win.ini\TrueType" VALUE="TTOnly" ANCHOR="0000660" OS="95" >
<!-- NortonRegEdit KEY="win.ini\TrueType" VALUE="TTIfCollisions" ANCHOR="0000661" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="Beep" ANCHOR="0000662" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="BorderWidth" ANCHOR="0000663" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="CoolSwitch" ANCHOR="0000664" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="CursorBlinkRate" ANCHOR="0000665" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="device" ANCHOR="0000666" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="Documents" ANCHOR="0000667" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="DoubleClickSpeed" ANCHOR="0000668" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="KeyboardDelay" ANCHOR="0000669" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="KeyboardSpeed" ANCHOR="0000670" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="load" ANCHOR="0000671" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="NetWarn" ANCHOR="0000672" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="NullPort" ANCHOR="0000673" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="Programs" ANCHOR="0000674" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="run" ANCHOR="0000675" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="ScreenSaveActive" ANCHOR="0000676" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="ScreenSaveTimeOut" ANCHOR="0000677" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="SwapMouseButtons" ANCHOR="0000679" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="DoubleClickHeight" ANCHOR="0000680" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="DoubleClickWidth" ANCHOR="0000681" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="DosPrint" ANCHOR="0000682" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="DefaultQueueSize" ANCHOR="0000683" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="DeviceNotSelectedTimeout" ANCHOR="0000684" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="MouseSpeed" ANCHOR="0000685" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="MouseThreshold1" ANCHOR="0000686" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="MouseThreshold2" ANCHOR="0000687" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="MouseTrails" ANCHOR="0000688" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FILEMGR\ViewTabs" VALUE="" ANCHOR="0000678" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="Spooler" ANCHOR="0000689" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="SystemFont" ANCHOR="0000690" OS="95" >
<!-- NortonRegEdit KEY="win.ini\windows" VALUE="TransmissionRetryTimeout" ANCHOR="0000691" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FILEMGR\ViewTabsList" VALUE="" ANCHOR="0000692" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="32BitDiskAccess" ANCHOR="0000693" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Install\Version1" VALUE="" ANCHOR="0000694" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Install\Version1" VALUE="Original Desktop" ANCHOR="0000695" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Norton Taskbar\?" VALUE="" ANCHOR="0000696" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="A20EnableCount" ANCHOR="0000697" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="AllEMSLocked" ANCHOR="0000698" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="AllVMsExclusive" ANCHOR="0000699" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="AllXMSLocked" ANCHOR="0000700" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="AltKeyDelay" ANCHOR="0000701" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="AltPasteDelay" ANCHOR="0000702" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="AutoRestoreScreen" ANCHOR="0000703" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\SmartFolders\Folders\?" VALUE="" ANCHOR="0000866" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\SYMFSV4\Undo" VALUE="" ANCHOR="0000867" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4\History_Lists\Run" VALUE="" ANCHOR="0000868" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4\History_Lists" VALUE="" ANCHOR="0000869" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4\History_Lists\SearchContains" VALUE="" ANCHOR="0000870" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4\History_Lists\SearchFileSpec" VALUE="" ANCHOR="0000871" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4\History_Lists\SearchWhere" VALUE="" ANCHOR="0000872" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4\Sets" VALUE="" ANCHOR="0000873" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4\Sets\FileType" VALUE="" ANCHOR="0000874" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4\Sets\Location" VALUE="" ANCHOR="0000875" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SmartFolders" VALUE="" ANCHOR="0000876" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SmartFolders\DirList" VALUE="" ANCHOR="0000877" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SmartFolders\FoldList" VALUE="" ANCHOR="0000878" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SmartFolders\TypeList" VALUE="" ANCHOR="0000879" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\SYMFDLG4" VALUE="" ANCHOR="0000880" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\SYMFSV4" VALUE="" ANCHOR="0000881" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFSV4\FTP" VALUE="" ANCHOR="0000882" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFSV4\FTP\?" VALUE="" ANCHOR="0000883" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFSV4\FTP Types" VALUE="" ANCHOR="0000884" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE" VALUE="" ANCHOR="0000239" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?" VALUE="" ANCHOR="0000240" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\ASCII Protocol" VALUE="" ANCHOR="0000241" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\Button Bars" VALUE="" ANCHOR="0000242" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\File Transfer" VALUE="" ANCHOR="0000243" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\host" VALUE="" ANCHOR="0000244" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\Online Service" VALUE="" ANCHOR="0000245" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\Remote Control" VALUE="" ANCHOR="0000246" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\System" VALUE="" ANCHOR="0000247" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\Zmodem Protocol" VALUE="" ANCHOR="0000250" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec" VALUE="" ANCHOR="0000251" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Info Desk" VALUE="" ANCHOR="0000252" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Control Center" VALUE="" ANCHOR="0000253" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FastFind" VALUE="" ANCHOR="0000254" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist" VALUE="" ANCHOR="0000255" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FILEMGR" VALUE="" ANCHOR="0000256" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Indexing" VALUE="" ANCHOR="0000257" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Install" VALUE="" ANCHOR="0000258" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Menu Companions" VALUE="" ANCHOR="0000259" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\NN-SplashScreen" VALUE="" ANCHOR="0000260" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Norton Taskbar" VALUE="" ANCHOR="0000261" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Run" VALUE="" ANCHOR="0000262" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4" VALUE="" ANCHOR="0000263" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFSV4" VALUE="" ANCHOR="0000264" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Welcome" VALUE="" ANCHOR="0000265" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities" VALUE="" ANCHOR="0000266" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\pcANYWHERE" VALUE="" ANCHOR="0000267" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\Norton Disk Doctor" VALUE="" ANCHOR="0000268" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\Norton Speed Disk" VALUE="" ANCHOR="0000269" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\Norton UnErase" VALUE="" ANCHOR="0000270" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\Space Wizard" VALUE="" ANCHOR="0000271" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Information" VALUE="" ANCHOR="0000272" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\SYMFDLG4\History_Lists\PingFix" VALUE="" ANCHOR="0000278" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FileAssist\History Lists" VALUE="" ANCHOR="0000281" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FILEMGR\Settings" VALUE="XTG" ANCHOR="0000282" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\NN-SplashScreen" VALUE="LastTime" ANCHOR="0000283" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings" VALUE="" ANCHOR="0000291" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\MS-DOSOptions" VALUE="" ANCHOR="0000292" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\URL" VALUE="" ANCHOR="0000293" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\System" VALUE="TCPIPNetBroadcast" ANCHOR="0000922" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\System" VALUE="TCPIPQueryInterval" ANCHOR="0000923" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\host" VALUE="ServiceStealthMode" ANCHOR="0000924" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\host" VALUE="ConfirmComputerName" ANCHOR="0000925" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\host" VALUE="AlwaysUseScanner" ANCHOR="0000926" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Software\Classes\htfile\shellex" VALUE="" ANCHOR="0000324" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Config\?\Enum" VALUE="" ANCHOR="0000333" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\RemoteAccess" VALUE="" ANCHOR="0000341" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum\BIOS" VALUE="" ANCHOR="0000350" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum\PCI" VALUE="" ANCHOR="0000355" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\File Transfer" VALUE="ConfirmSend" ANCHOR="0000927" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\Enum\SCSI" VALUE="" ANCHOR="0000356" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility" VALUE="" ANCHOR="0000357" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility\HighContrast" VALUE="" ANCHOR="0000358" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility\KeyboardResponse" VALUE="" ANCHOR="0000360" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility\MouseKeys" VALUE="" ANCHOR="0000361" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility\SerialKeys" VALUE="" ANCHOR="0000362" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility\ShowSounds" VALUE="" ANCHOR="0000364" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility\SoundSentry" VALUE="" ANCHOR="0000368" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility\StickyKeys" VALUE="" ANCHOR="0000369" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility\TimeOut" VALUE="" ANCHOR="0000370" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\Accessibility\ToggleKeys" VALUE="" ANCHOR="0000371" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Adapter" VALUE="" ANCHOR="0000372" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\CDROM" VALUE="" ANCHOR="0000373" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\DiskDrive" VALUE="" ANCHOR="0000374" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Display" VALUE="" ANCHOR="0000375" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\fdc" VALUE="" ANCHOR="0000376" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\hdc" VALUE="" ANCHOR="0000377" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Keyboard" VALUE="" ANCHOR="0000378" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\MEDIA" VALUE="" ANCHOR="0000379" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Modem" VALUE="" ANCHOR="0000380" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor" VALUE="" ANCHOR="0000381" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Mouse" VALUE="" ANCHOR="0000382" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\MTD" VALUE="" ANCHOR="0000383" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\MultiFunction" VALUE="" ANCHOR="0000385" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net" VALUE="" ANCHOR="0000386" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\NetClient" VALUE="" ANCHOR="0000387" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\NetService" VALUE="" ANCHOR="0000388" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\NetTrans" VALUE="" ANCHOR="0000389" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\nodriver" VALUE="" ANCHOR="0000390" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\PCMCIA" VALUE="" ANCHOR="0000391" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Ports" VALUE="" ANCHOR="0000393" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Printer" VALUE="" ANCHOR="0000398" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\?\File Transfer" VALUE="ConfirmDelete" ANCHOR="0000928" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\PrinterUpgrade" VALUE="" ANCHOR="0000401" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\SCSIAdapter" VALUE="" ANCHOR="0000402" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\WOW" VALUE="" ANCHOR="0000406" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\System" VALUE="" ANCHOR="0000408" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="" ANCHOR="0000542" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot.description" VALUE="" ANCHOR="0000543" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\desktop" VALUE="WallPaperOriginX" ANCHOR="0000929" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="BkGndNotifyAtPFault" ANCHOR="0000704" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="CGA40WOA.FON" ANCHOR="0000705" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="CGA80WOA.FON" ANCHOR="0000706" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="CGANoSnow" ANCHOR="0000707" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="COMxAutoAssign" ANCHOR="0000708" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="COMxBase" ANCHOR="0000709" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="COMxBuffer" ANCHOR="0000710" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="COMxFIFO" ANCHOR="0000711" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="COMxIrq" ANCHOR="0000712" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="COMIrqSharing" ANCHOR="0000713" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="COMxProtocol" ANCHOR="0000714" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="COMBoostTime" ANCHOR="0000715" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="COMdrv30" ANCHOR="0000716" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="Device" ANCHOR="0000717" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="Display" ANCHOR="0000718" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="DMABufferIn1MB" ANCHOR="0000719" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="DMABufferSize" ANCHOR="0000720" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="DOSPromptExitInstruc" ANCHOR="0000721" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="DualDisplay" ANCHOR="0000722" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="EBIOS" ANCHOR="0000723" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="EISADMA" ANCHOR="0000724" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="EMMExclude" ANCHOR="0000725" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="EMMInclude" ANCHOR="0000726" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="EMMPageFrame" ANCHOR="0000727" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="EMMSize" ANCHOR="0000728" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="FileSysChange" ANCHOR="0000729" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="Global" ANCHOR="0000730" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="HardDiskDMABuffer" ANCHOR="0000731" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="IdleVMWakeUpTime" ANCHOR="0000732" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="IgnoreInstalledEMM" ANCHOR="0000733" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="InDOSPolling" ANCHOR="0000734" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="INT28Critical" ANCHOR="0000735" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="IRQ9Global" ANCHOR="0000736" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="Keyboard" ANCHOR="0000737" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="KeyBoostTime" ANCHOR="0000738" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="KeyBufferDelay" ANCHOR="0000739" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="KeyIdleDelay" ANCHOR="0000740" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="KeyPasteCRSkipCount" ANCHOR="0000741" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="KeyPasteDelay" ANCHOR="0000742" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="KeyPasteSkipCount" ANCHOR="0000743" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="KeyPasteTimeout" ANCHOR="0000744" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="KybdPasswd" ANCHOR="0000745" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="KybdReboot" ANCHOR="0000746" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="Local" ANCHOR="0000747" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="LocalLoadHigh" ANCHOR="0000748" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="LocalReboot" ANCHOR="0000749" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="LPTxAutoAssign" ANCHOR="0000750" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="LRULowRateMult" ANCHOR="0000751" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="LRURateChngTime" ANCHOR="0000752" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="LRUSweepFreq" ANCHOR="0000753" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="LRUSweepLen" ANCHOR="0000754" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="LRUSweepLowWater" ANCHOR="0000755" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="LRUSweepReset" ANCHOR="0000756" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MaxBPs" ANCHOR="0000757" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MapPhysAddress" ANCHOR="0000758" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MaxCOMPort" ANCHOR="0000759" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MaxDMAPGAddress" ANCHOR="0000760" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MaxPagingFileSize" ANCHOR="0000761" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MaxPhysPage" ANCHOR="0000762" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MCADMA" ANCHOR="0000763" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MessageBackColor" ANCHOR="0000764" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MessageTextColor" ANCHOR="0000765" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MinTimeSlice" ANCHOR="0000766" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MinUnlockMem" ANCHOR="0000767" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MinUserDiskSpace" ANCHOR="0000768" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="Mouse" ANCHOR="0000769" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="MouseSoftInit" ANCHOR="0000770" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="NetAsynchFallback" ANCHOR="0000771" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="NetAsynchTimeout" ANCHOR="0000772" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="NetDMASize" ANCHOR="0000773" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="NetHeapSize" ANCHOR="0000774" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="Network" ANCHOR="0000775" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="NMIReboot" ANCHOR="0000776" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="NoEMMDriver" ANCHOR="0000777" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="NoWaitNetIO" ANCHOR="0000778" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="OverlappedIO" ANCHOR="0000779" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="PageBuffers" ANCHOR="0000780" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="PageOverCommit" ANCHOR="0000781" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="Paging" ANCHOR="0000782" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="PagingDrive" ANCHOR="0000783" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="PagingFile" ANCHOR="0000784" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="PerformBackfill" ANCHOR="0000785" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="PermSwapDOSDrive" ANCHOR="0000786" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="PermSwapSizeK" ANCHOR="0000787" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="PerVMFILES" ANCHOR="0000788" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="PSPIncrement" ANCHOR="0000789" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="ReflectDOSInt2A" ANCHOR="0000790" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="ReservedHighArea" ANCHOR="0000791" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="ReservePageFrame" ANCHOR="0000792" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="ReserveVideoROM" ANCHOR="0000793" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="ROMScanThreshold" ANCHOR="0000794" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="ScrollFrequency" ANCHOR="0000795" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="SGrabLPT" ANCHOR="0000796" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="SyncTime" ANCHOR="0000797" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="SystemROMBreakPoint" ANCHOR="0000798" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="SysVMEMSLimit" ANCHOR="0000799" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="SysVMEMSLocked" ANCHOR="0000800" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="SysVMEMSRequired" ANCHOR="0000801" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="SysVMV86Locked" ANCHOR="0000802" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="SysVMXMSLimit" ANCHOR="0000803" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="SysVMXMSRequired" ANCHOR="0000804" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="TimerCriticalSection" ANCHOR="0000805" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="TokenRingSearch" ANCHOR="0000806" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="TranslateScans" ANCHOR="0000807" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="TrapTimerPorts" ANCHOR="0000808" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="UniqueDOSPSP" ANCHOR="0000809" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="UseableHighArea" ANCHOR="0000810" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="UseInstFile" ANCHOR="0000811" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="UseROMFont" ANCHOR="0000812" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="VGAMonoText" ANCHOR="0000813" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="VideoBackgroundMsg" ANCHOR="0000814" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="VideoSuspendDisable" ANCHOR="0000815" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="VirtualHDIrq" ANCHOR="0000816" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="WindowKBRequired" ANCHOR="0000817" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="WindowMemSize" ANCHOR="0000818" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="WindowUpdateTime" ANCHOR="0000819" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="WinExclusive" ANCHOR="0000820" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="WinTimeSlice" ANCHOR="0000821" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="WOAFont" ANCHOR="0000822" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="XlatBufferSize" ANCHOR="0000823" OS="95" >
<!-- NortonRegEdit KEY="system.ini\386Enh" VALUE="XMSUMBInitCalls" ANCHOR="0000824" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="386grabber" ANCHOR="0000826" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="CachedFileHandles" ANCHOR="0000827" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="comm.drv" ANCHOR="0000828" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="display.drv" ANCHOR="0000829" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="drivers" ANCHOR="0000830" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="fixedfon.fon" ANCHOR="0000831" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="fonts.fon" ANCHOR="0000832" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="keyboard.drv" ANCHOR="0000833" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="language.dll" ANCHOR="0000834" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="mouse.drv" ANCHOR="0000835" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="network.drv" ANCHOR="0000836" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="oemfonts.fon" ANCHOR="0000837" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="Scrnsave" ANCHOR="0000838" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="shell" ANCHOR="0000839" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="sound.drv" ANCHOR="0000840" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="system.drv" ANCHOR="0000841" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="TaskMan.Exe" ANCHOR="0000842" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="CommandEnvSize" ANCHOR="0000843" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="DisablePositionSave" ANCHOR="0000844" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="FontChangeEnable" ANCHOR="0000845" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="GlobalHeapSize" ANCHOR="0000846" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="LocalTSRs" ANCHOR="0000847" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="MouseInDosBox" ANCHOR="0000848" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="NetAsynchSwitching" ANCHOR="0000849" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="ScreenLines" ANCHOR="0000850" OS="95" >
<!-- NortonRegEdit KEY="system.ini\NonWindowsApp" VALUE="SwapDisk" ANCHOR="0000851" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\Welcome" VALUE="Current Tip" ANCHOR="0000859" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\Install\Version1" VALUE="Location" ANCHOR="0000860" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\Install\Version1" VALUE="" ANCHOR="0000861" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\Norton Taskbar" VALUE="" ANCHOR="0000862" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\Norton Taskbar" VALUE="DefaultNNDesktop" ANCHOR="0000863" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\SmartFolders" VALUE="" ANCHOR="0000864" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator\SmartFolders\Folders" VALUE="" ANCHOR="0000865" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton Disk Doctor\Config" VALUE="skipCMOSTests" ANCHOR="0000906" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton Disk Doctor\Config" VALUE="skipPartitionTests" ANCHOR="0000907" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton Disk Doctor\Config" VALUE="skipCompressionTests" ANCHOR="0000908" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\Norton Speed Disk\SPEEDISK Colors" VALUE="" ANCHOR="0000909" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Navigator\FastFind\SearchTemplates" VALUE="" ANCHOR="0000890" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Auto-Protect" VALUE="DisableSplashScreen" ANCHOR="0000891" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Auto-Protect\InternalSettings" VALUE="" ANCHOR="0000893" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="dibeng.drv" ANCHOR="0000892" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Auto-Protect\InternalSettings" VALUE="ShowUIWhileScanningBoot" ANCHOR="0000894" OS="95" >
<!-- NortonRegEdit KEY="system.ini\boot" VALUE="gdi.exe" ANCHOR="0000895" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Auto-Protect\InternalSettings" VALUE="RegisterApplyTimeForAgent" ANCHOR="0000896" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Auto-Protect\InternalSettings" VALUE="ExecuteAgent" ANCHOR="0000897" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Clinic" VALUE="DisableSplashScreen" ANCHOR="0000898" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\Norton System Doctor" VALUE="" ANCHOR="0000899" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Genie" VALUE="" ANCHOR="0000900" OS="95" >
<!-- NortonRegEdit KEY="progman.ini\Settings" VALUE="Order" ANCHOR="0000902" OS="95" >
<!-- NortonRegEdit KEY="progman.ini\Settings" VALUE="Window" ANCHOR="0000903" OS="95" >
<!-- NortonRegEdit KEY="win.ini\Pscript.Drv" VALUE="ATMWorkaround" ANCHOR="0000904" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\System Information\Drive" VALUE="" ANCHOR="0000911" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel" VALUE="WallPaperOriginY" ANCHOR="0000930" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Control Panel\desktop" VALUE="WallPaperStyle" ANCHOR="0000931" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Norton Registry Advisor" VALUE="" ANCHOR="0000932" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\OnRamp" VALUE="" ANCHOR="0000933" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton Utilities\Registry Tracker" VALUE="" ANCHOR="0000934" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\Norton File Compare" VALUE="" ANCHOR="0000935" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\Norton Registry Editor" VALUE="" ANCHOR="0000936" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\Norton Registry Tracker" VALUE="" ANCHOR="0000937" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Information\Display" VALUE="" ANCHOR="0000938" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Information\Drive" VALUE="" ANCHOR="0000939" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Information\Input" VALUE="" ANCHOR="0000941" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Information\Memory" VALUE="" ANCHOR="0000942" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Information\Multimedia" VALUE="" ANCHOR="0000943" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Information\Network" VALUE="" ANCHOR="0000944" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Information\Printer" VALUE="" ANCHOR="0000945" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Symantec\Norton Utilities\System Information\System" VALUE="" ANCHOR="0000946" OS="95" >
<!-- NortonRegEdit KEY="control.ini" VALUE="" ANCHOR="0000947" OS="95" >
<!-- NortonRegEdit KEY="system.ini" VALUE="" ANCHOR="0000948" OS="95" >
<!-- NortonRegEdit KEY="win.ini" VALUE="" ANCHOR="0000949" OS="95" >
<!-- NortonRegEdit KEY="winfile.ini" VALUE="" ANCHOR="0000950" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\*" VALUE="" ANCHOR="0000951" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID" VALUE="" ANCHOR="0000952" OS="95" >
<!-- NortonRegEdit KEY="HKEY_LOCAL_MACHINE\System\CurrentControlSet\control\NetworkProvider\Order" VALUE="" ANCHOR="0000953" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft" VALUE="" ANCHOR="0000954" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows" VALUE="" ANCHOR="0000955" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion" VALUE="" ANCHOR="0000956" OS="95" >
<!-- NortonRegEdit KEY="HKEY_USERS\?\Software\Microsoft\Windows\CurrentVersion\Explorer" VALUE="" ANCHOR="0000957" OS="95" >
<HTML>
<BODY>
<!-- Norton Start = "0000164">
<IMG SRC="RegKey.gif">
The Help key contains the help file path name for installed 32-bit applications.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000165">
<IMG SRC="RegKey.gif">
The Windows Messaging Subsystem key contains driver information for common messaging calls (CMC) and the messaging application programming interface (MAPI).

The Messaging Subsystem includes built-in DLL files accessible by any messaging application. MAPI functions allow messages to be retrieved from any MAPI-compliant mail server.  Messages can be retrieved from another system on a network or  from a remote system such as MCI Mail, or both.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000167">
<IMG SRC="RegKey.gif">
The Symantec key is the root entry for any 32-bit Symantec applications installed on the system.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000168">
<IMG SRC="RegKey.gif">
The InstalledApps key lists the paths to 32-bit Symantec applications installed on this computer.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000169">
<IMG SRC="RegKey.gif">
The Norton AntiVirus key contains configuration information for Norton AntiVirus.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000170">
<IMG SRC="RegKey.gif">
The Auto-Protect key contains information about Norton AntiVirus Auto-Protect.
<UL>
<LI>Auto-Protect is a feature of Norton AntiVirus that works in the background to protect your computer from viruses.
<LI>
Auto-Protect:<UL>
<LI>
Scans program files whenever they are used.
<LI>
Uses sophisticated Virus Sensor technology that monitors your computer for new viruses that have not yet been included in the Norton AntiVirus Virus List.
<LI>
Monitors your computer for virus-like activities (such as an attempt to format your hard disk) and warns you so you can prevent this behavior.</UL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000171">
<IMG SRC="RegKey.gif">
The Clinic key holds configuration settings for the Norton AntiVirus user interface.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000172">
<IMG SRC="RegKey.gif">
The Install key stores the version number of Norton AntiVirus that is installed, the locations in which the Norton AntiVirus files have been installed, and information specifying which components of Norton AntiVirus are installed.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000173">
<IMG SRC="RegKey.gif">
The Virus Defs key contains information about the Norton AntiVirus virus definitions files.
<UL>
<LI>Virus definition files provide information Norton AntiVirus uses to detect and remove viruses. These files are updated monthly by Symantec Corporation and are available from many sources. For the best possible virus protection, you should keep these virus definitions files up-to-date. for more information, see the Norton AntiVirus documentation.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000174">
<IMG SRC="RegKey.gif">
The Norton Utilities key contains subkeys and values used by Norton Utilities.
<UL>
<LI>Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000175">
<IMG SRC="RegKey.gif">
The Install key stores the version number of Norton Utilities version installed, the locations in which the Norton Utilities files have been installed, and information specifying which components of Norton Utilities are installed.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000177">
<IMG SRC="RegKey.gif">
The Norton Disk Doctor key contains configuration settings for Norton Disk Doctor and last run date and time information for each disk drive.
<UL>
<LI>Norton Disk Doctor diagnoses and repairs existing or potential problems with any disk. It performs a variety of tests, checking everything from the disk's partition table to its physical surface.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000178">
<IMG SRC="RegKey.gif">
The Norton Image key contains configuration settings for Norton Image and records the date and time Image was last run on each disk drive.
<UL>
<LI>Image takes a "snapshot" of a disk's critical file information, a process called imaging. Image saves your disk's boot record, file allocation tables (FATs), and root information to a special file. Various Norton Utilities programs can use the disk's image to:<UL>
<LI>
Recover deleted files or directories
<LI>
Restore files and directories that are lost if you accidentally format or seriously damage a disk</UL>
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000179">
<IMG SRC="RegKey.gif">
The Norton Protection key contains configuration information for the Norton Protected Recycle Bin, including information for each drive protected by Norton Protection.
<UL>
<LI>Norton Protection enhances the file recovery capabilities of the Windows Recycle Bin.
<LI>
If your system includes more than one hard drive, the Norton Protection options can be customized for each drive.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000180">
<IMG SRC="RegKey.gif">
The Norton Rescue key contains configuration settings for Norton Rescue Disk, and records the date and time Norton Rescue Disk was last run.
<UL>
<LI>Norton Rescue Disk copies your computer's critical setup data and startup files to one or more floppy disks (rescue disks). If your computer fails to start, the rescue disks can be used to start your system.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000182">
<IMG SRC="RegKey.gif">
The Norton Speed Disk key contains configuration settings for the Speed Disk Utility and records the date and time Speed Disk was last run for each disk drive.
<UL>
<LI>Speed Disk optimizes disk access and improves your computer's performance. It rearranges the files on a disk, including the Windows swap file, for maximum efficiency.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000183">
<IMG SRC="RegKey.gif">
The Norton System Doctor key contains configuration settings for System Doctor options.
<UL>
<LI>Norton System Doctor helps keep your computer free of problems and running at peak efficiency. It continuously monitors your computer's operating environment, and can alert you immediately when conditions require attention. Norton System Doctor can fix many problems automatically, without interrupting your work.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000184">
<IMG SRC="RegKey.gif">
The Norton UnErase key records the full path to the folder in which Norton UnErase was installed.
<UL>
<LI>UnErase Wizard steps you through the process of recovering deleted files. If the files are protected by Norton Protection or if they are still in the Recycle Bin, the recovery will be 100 percent successful.
<LI>
UnErase Wizard can frequently recover unprotected files as well, even those deleted from the Recycle Bin. If a file is recoverable but cannot be recovered automatically, UnErase Wizard can help you reconstruct it.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000905">
<IMG SRC="RegKey.gif">
The Config key contains user customization settings for Norton System Doctor.To reset a System Doctor configuration to the default condition, delete this key.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000912">
<IMG SRC="RegKey.gif">
My Computer is the gateway to your Registry database, the master record of configuration information about every aspect of your computer's hardware and software. The Registry contains system-specific resource settings as well as your personal preference settings.
<UL>
<LI>In the left panel, click a plus [+] key to expand the tree. Click a minus [-] key to collapse the branch.
<LI>
As you navigate through the Registry hierarchy, click open a folder to display its contents in the upper-right panel. This Advisor panel displays context-sensitive information about selected items. 
<LI>
The right mouse button supports context-sensitive editing, shortcut, and navigation menus. The options available are determined by the position of the cursor.
</UL>
<UL>
<LI><I>Note:</I> For detailed information on using the Norton Registry Editor, access the Help menu. (Press F1 or click Help on the menu bar.)
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000913">
<IMG SRC="RegKey.gif">
In Windows 3.1, initialization (INI) files contained extensive hardware and software settings. While many INI file entries have moved to the Registry, these files still provide some configuration data for Windows 95. Also, for compatibility reasons, many INI file settings are retained and supported in Windows 95.
<UL>
<LI>In the upper left panel, click on an item or a plus [+] key to expand the tree. Click on a minus [-] key to collapse the branch. 
<LI>
Click open a folder, and its contents will be displayed in the upper-right panel. This Advisor panel displays context-sensitive information about selected items.  
<LI>
The right mouse button supports context-sensitive editing, shortcut, and navigation menus. The options available are determined by the position of the cursor.
</UL>
<UL>
<LI><I>Note:</I> For detailed information on using the Norton Registry Editor, access the Help menu. (Press F1 or click Help on the menu bar.)
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000914">
<IMG SRC="RegKey.gif">
Network Neighborhood is the pathway for you to access, view, and, with the proper administrator rights, modify the contents of the Registry and Windows INI files on networked PCs. Use the Norton Registry Editor to compare and change system and user settings, troubleshoot devices, and back up system files.
<UL>
<LI>In the upper-left panel, click on an item or a plus [+] key to expand the tree. Click on a minus [-] key to collapse the branch. 
<LI>
Click open a folder to display its contents in the upper-right panel. This Advisor panel displays context-sensitive information about selected items. 
<LI>
The right mouse button supports context-sensitive editing, shortcut, and navigation menus. The options available are determined by the position of the cursor.
</UL>
<UL>
<LI><I>Note:</I> For detailed information on using the Norton Registry Editor, access the Help menu. (Press F1 or click Help on the menu bar.)
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000185">
<IMG SRC="RegKey.gif">
The System Information key contains information used by the Norton System Information tabs and benchmark tests.
<UL>
<LI>System Information gives you quick, one-stop access to basic or detailed information about your computer.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000186">
<IMG SRC="RegKey.gif">
The SharedUsage key lists those Symantec DLLs, virtual device drivers (VxDs), and other resources that are shared by Symantec applications.
<UL>
<LI>Each subkey represents a shared file, whose value is the path to the resource file.
<LI>
Each resource subkey lists the Symantec applications that currently use the shared resource and the paths to those applications.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000187">
<IMG SRC="RegKey.gif">
Placeholder
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000188">
<IMG SRC="RegKey.gif">
The MediaProperties key contains subkeys for multimedia devices and drivers including MIDI systems and joysticks.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000189">
<IMG SRC="RegKey.gif">
The PwdProvider key contains information about the various password providers installed on the system.
<UL>
<LI>Networking and other applications on the system may include password protection, requiring you to enter a password before accessing the network or making changes to a program. Windows provides this key for manufacturers to specify password-handling information.
<LI>
A password provider is a DLL that handles the changing of passwords for a particular resource or application.
<LI>
Password providers allow Windows to provide a central interface for changing user passwords. Click Passwords in the Windows Control Panel.
<LI>
Password Providers also simplify synchronization of passwords, allowing you to change the passwords for several applications or networks at the same time using the same Control Panel interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000190">
<IMG SRC="RegKey.gif">
The ServiceProvider key stores information about the various network service providers installed on the system.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000194">
<IMG SRC="RegKey.gif">
The Winsock key is a placeholder for settings for third-party Windows Sockets applications or libraries.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000195">
<IMG SRC="RegKey.gif">
The InstallLocationsMRU key contains the path of the drive used to install Windows.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000201">
<IMG SRC="RegKey.gif">
The Printers key contains the description of the default printer if multiple printers are available.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000205">
<IMG SRC="RegVal.gif">
The Show value determines whether the Windows Tip of the Day appears every time Windows is restarted.
<UL>
<LI>For systems set up for multiple users, this value can be customized for each user of the system.
</UL>
<UL><LI><I>Default value:</I> 1</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<UL>
<LI>To disable the Tip of the Day, set the Show binary value to 1.
<LI>To enable the Tip of the Day, set the Show binary value to 0.
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000025">
<IMG SRC="RegKey.gif">
This key controls whether the Recycle Bin icon appears on the Windows 95 desktop.
<UL>
<LI>To hide the Recycle Bin icon, rename or delete this key.
</UL>
<UL>
<LI><I>Note:</I> You may not be able to recover deleted files if you hide the Recycle Bin icon.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000026">
<IMG SRC="RegKey.gif">
This key controls whether the Microsoft Internet Explorer icon appears on the Windows 95 desktop.
<UL>
<LI>To hide the Microsoft Internet Explorer icon, rename or delete this key.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000027">
<IMG SRC="RegKey.gif">
The NameSpace key controls whether the Inbox, Microsoft Network, Recycle Bin, and Internet Explorer icons appear on the Windows 95 desktop.
<UL>
<LI>To hide the Inbox, Microsoft Network, Recycle Bin, and Internet Explorer icons , rename or delete this key.
</UL>
<UL>
<LI><I>Note:</I> You may not be able to recover erased files, or use Microsoft Exchange or Internet Explorer if you hide these icons.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000028">
<IMG SRC="RegVal.gif">
The NoDesktop value controls whether icons appear on the Windows 95 desktop.
<UL>
<LI>For systems set up for multiple users, this value can be customized for each user of the system.
</UL>
<UL><LI><I>Default value:</I> hex 1</UL>
<UL><LI><I>Valid range:</I> hex 1</UL>
<UL>
<LI>To hide all icons on the Windows 95 desktop, set this value to hex 1.
</UL>
<UL>
<LI><I>Note:</I> If you hide the desktop icons, you may not be able to recover erased files, use Microsoft Exchange or Internet Explorer, or access unmapped network drives.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000029">
<IMG SRC="RegVal.gif">
This DisableSplashScreen value controls whether a splash (startup logo) screen appears when you start Norton Utilities.
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<UL>
<LI>To enable the splash screen, set this string value to 0.
<LI>To suppress the splash screen, set this string value to 1.
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000032">
<IMG SRC="RegVal.gif">
The RegisteredOwner value specifies the name of the registered user of this copy of Windows.
<UL>
<LI>To change the registered owner name, set this value to the desired name.
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000033">
<IMG SRC="RegVal.gif">
The RegisteredOrganization value specifies the organization of the registered user of this copy of Windows.
<UL>
<LI>This value is empty for personal copies of Windows.
</UL>
<UL>
<LI>To change the registered organization name, set this value to the desired name.
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000034">
<IMG SRC="RegVal.gif">
This (default) value specifies what program starts when you double-click the My Computer icon.
<UL>
<LI>To cause Explorer to start when you double-click My Computers, set this (default) value to EXPLORER.EXE.
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000035">
<IMG SRC="RegVal.gif">
The NoStartBanner value controls whether the Click Here To Begin arrow appears when you start Windows 95.
<UL>
<LI>The Click Here To Begin arrow floats along the Taskbar and bounces into the Start button.
<LI>
For systems set up for multiple users, this value can be customized for each user of the system.
</UL>
<UL><LI><I>Valid range:</I> binary 0-1</UL>
<UL>
<LI>To disable the Click Here To Begin arrow:
<OL>
<LI>Add NoStartBanner as a binary value under the Explorer subkey.
<LI>Set the value to binary 0.
</OL>
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000036">
<IMG SRC="RegVal.gif">
This default value specifies the name displayed beneath the Recycle Bin on the desktop.
<UL><LI><I>Default value:</I>  Recycle Bin</UL>
<UL>
<LI>To change the name of the Recycle Bin desktop item, change this value to the desired text.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000037">
<IMG SRC="RegVal.gif">
This (default) value adds Quick View to the context menu of every file type.
<UL>
<LI>To cause Quick View to be available only on the context menus of certain file types, delete the Quick View key altogether.<BR>Quick View is subsequently available on the context menus of only those file types that have the Quick View option explicitly enabled from the View Options menu.
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000038">
<IMG SRC="RegKey.gif">
This shell key defines the items in the context menus of directory icons.
<UL>
<LI>To add an item to all directory icon context menus:
<OL>
<LI>Create a new key under the shell key.
<LI>Name this key with the text you wish to use as the menu item name.
<LI>Set its default value to the complete pathname of the program to be associated with the new menu item.
</OL>
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000039">
<IMG SRC="RegKey.gif">
This shell key defines the items in the context menu of the Inbox desktop item.
<UL>
<LI>To add an item to the Inbox context menu:
<OL>
<LI>Create a new key under the shell key.
<LI>Name this key with the text you wish to use as the menu item name.
<LI>Set its default value to the complete path to the program to be associated with the new menu item.
</OL>
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000040">
<IMG SRC="RegKey.gif">
This shell key defines the items in the context menu of the Network Neighborhood desktop item.
<UL>
<LI>To add an item to the Network Neighborhood context menu:<BR>
<OL>
<LI>Create a new key under the shell key.
<LI>Name this key with the text you wish to use as the menu item name.
<LI>Set its default value to the complete path to the program to be associated with the new menu item.
</OL>
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000041">
<IMG SRC="RegKey.gif">
This shell key defines the items in the context menu of the My Computer desktop item.
<UL>
<LI>To add an item to the Network Neighborhood context menu:<BR>
<OL>
<LI>Create a new key under the shell key.
<LI>Name this key with the text you wish to use as the menu item name.
<LI>Set its default value to the complete path to the program to be associated with the new menu item.
</OL>
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000042">
<IMG SRC="RegKey.gif">
This shell key defines the items in the context menu of the Recycle Bin desktop item.
<UL>
<LI>To add an item to the Recycle Bin context menu:<BR>
<OL>
<LI>Create a new key under the shell key.
<LI>Name this key with the text you wish to use as the menu item name.
<LI>Set its default value to the complete path to the program to be associated with the new menu item.
</OL>
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000043">
<IMG SRC="RegKey.gif">
The Shell Folders key shows the locations of special file system folders, such as the Desktop, Program, and Startup folder.
<UL>
<LI>The folders specified under this key are used for special purposes.  For example, Windows automatically creates and stores shortcuts to the most recently opened files in the folder designated as Recent. These files will then appear under Documents in the Start menu.
<LI>
For systems set up for multiple users, these values can be customized for each user of the system.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000044">
<IMG SRC="RegKey.gif">
The User Shell Folders key lists "special purpose" folders that have been modified by the user.
<UL>
<LI>If you want to change the default folder used for a Windows special purpose, such as the folder used to store shortcuts to recently opened files, you must specify the new folder as a value in both the Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders key (under HKEY_CURRENT_USER), and here, in the User Shell Folders key. 
<LI>
You must shut down and restart windows before the change takes effect.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000045">
<IMG SRC="RegVal.gif">
The Recent value specifies the folder used to store shortcuts to recently opened files.
<UL>
<LI>The recently opened files stored in this folder appear under Documents in the Start menu.
<LI>
For systems set up for multiple users, this value is customized for each user of the system.
</UL>
<UL><LI><I>Default value:</I> C:\WINDOWS\Recent</UL>
<UL>
<LI>To designate another folder to hold shortcuts to recently opened files:
<OL>
<LI>Make sure the folder exists.
<LI>Change the value to specify the new folder.
<LI>Add a duplicate value entry under HKEY_USERS\Default\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders.
</OL>
<LI>To prevent any recently opened files from appearing under Documents in the Start menu:
<OL>
<LI>Open the context menu of the Recycle Bin, and click Do Not Move Files To Recycle Bin in the Global Properties. (If you do not click this option, any files you delete appear under Documents in the Start menu.)
<LI>Set the Recent string value to "C:\Recycled".
<LI>Copy this value to HKEY_USERS\Default\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders.
</OL>
</UL>
<UL>
<LI><I>Note:</I> If you prevent recently opened files from displaying under Documents in the Start menu, you will lose all Recycle Bin protection. Subsequently, it will be more difficult, if not impossible, to recover deleted files.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000046">
<IMG SRC="RegKey.gif">
The ESDI key contains  information about fixed disk devices connected to this computer.
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000047">
<IMG SRC="RegKey.gif">
The FLOP key contains  information about floppy disk devices connected to this computer.
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000048">
<IMG SRC="RegKey.gif">
The ISAPNP key contains  information about  ISA bus plug and play devices connected to this computer.
<UL>
<LI>Some devices that are not true plug and play hardware are given a plug and play wrapper by the operating system. This consists of a PNP* device ID, a reference to a hardware .INF file and a VxD.
</UL>
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000049">
<IMG SRC="RegKey.gif">
The Monitor key contains information about display devices and modes for monitors connected to this computer.
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000050">
<IMG SRC="RegKey.gif">
The Network key contains information about network server, protocol,  and bindings.
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000051">
<IMG SRC="RegKey.gif">
The Root key contains information about system BIOS and  plug and play BIOS,  as well as flags for alternate hardware configurations and information about  legacy devices that at one time were connected to this computer.
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000052">
<IMG SRC="RegKey.gif">
The Uninstall key contains subkeys for installed programs that can be uninstalled by the Add/Remove Programs applet in the Windows Control Panel.
<UL>
<LI>In addition, if a program has been deleted rather than uninstalled, the subkey for that application can be deleted as well.
</UL>
<UL>
<LI>To remove a program from the list under Add/Remove Programs in the Control Panel without actually uninstalling the program, remove the program's subkey.
</UL>
<UL>
<LI><I>Note:</I> Each subkey also specifies how its associated application should be uninstalled. If you delete a subkey, it may be difficult to completely remove the application and all its components from your system in the future.
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000053">
<IMG SRC="RegKey.gif">
The RunMRU key holds values representing the most recently used (MRU) commands that were executed from the Start menu's Run command.
<UL>
<LI>The command history appears as a drop-down list in the Run dialog box.
<LI>
For systems set up for multiple users, these values will be customized for each user of the system.
</UL>
<UL>
<LI>To clear any or all entries from the history list, delete the associated values from this key.<BR>(You do not need to change the MRUList value, as that is maintained automatically by the system.)
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000054">
<IMG SRC="RegVal.gif">
This (default) value specifies the image file used as the default icon for the the Windows Inbox.
<UL>
<LI>The value specifies the full path to an ICO, EXE, or DLL file that contains icon images. EXE and DLL files may contain multiple icons. An index number following the file specification and separated from it by a comma specifies the location of the icon in the file. (See the default value for an example.)
</UL>
<UL><LI><I>Default value:</I> C:\WINDOWS\SYSTEM\COOL.DLL,30</UL>
<UL>
<LI>To change the icon used for the Windows Inbox:
<LI>Change this value to specify the full path to the file containing the new image, and the index number identifying the position of that image in the file.<BR>The format should be: <I>filename,number</I>
<LI>NOTE: The index numbers are zero-based. The first icon image in a file is considered number 0, the second is number 1, and so forth.
<LI>If the file contains only one icon image, use an index number of 0.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000055">
<IMG SRC="RegVal.gif">
This (default) value specifies the image file used as the default icon for Network Neighborhood.
<UL>
<LI>The value specifies the full path to an ICO, EXE, or DLL file that contains icon images. EXE and DLL files may contain multiple icons. An index number following the file specification and separated from it by a comma specifies the location of the icon in the file. (See the default value for an example.)
</UL>
<UL><LI><I>Default value:</I> C:\WINDOWS\SYSTEM\COOL.DLL,17</UL>
<UL>
<LI>To change the icon used for Network Neighborhood:
<LI>Change this value to specify the full path to the file containing the new image, and the index number identifying the position of that image in the file.<BR>The format should be: <I>filename,number</I>
<LI>NOTE: The index numbers are zero-based. The first icon image in a file is considered number 0, the second is number 1, and so forth
<LI>If the file contains only one icon image, use an index number of 0.
</UL>
<UL>
<LI><I>Note:</I> .
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000056">
<IMG SRC="RegVal.gif">
This (default) value specifies the image file used as the default icon for My Computer.
<UL>
<LI>The value specifies the full path to an ICO, EXE, or DLL file that contains icon images. EXE and DLL files may contain multiple icons. An index number following the file specification and separated from it by a comma specifies the location of the icon in the file. (See the default value for an example.)
</UL>
<UL><LI><I>Default value:</I> C:\WINDOWS\SYSTEM\COOL.DLL,16</UL>
<UL>
<LI>To change the icon used for My Computer:
<OL>
<LI>Change this value to specify the full path to the file containing the new image, and the index number identifying the position of that image in the file.<BR>The format should be: <I>filename,number</I><BR>NOTE: The index numbers are zero-based. The first icon image in a file is considered number 0, the second is number 1, and so forth. If the file contains only one icon image, use an index number of 0.
</OL>
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000057">
<IMG SRC="RegVal.gif">
This (default) value specifies the image file used as the default icon for the Recycle Bin.
<UL>
<LI>The value specifies the full path to an ICO, EXE, or DLL file that contains icon images. EXE and DLL files may contain multiple icons. An index number following the file specification and separated from it by a comma specifies the location of the icon in the file. (See the default value for an example.)
</UL>
<UL><LI><I>Default value:</I> C:\WINDOWS\SYSTEM\SHELL.DLL,31</UL>
<UL>
<LI>To change the default icon used for Recycle Bin:
<LI>Change this value to specify the full path to the file containing the new image, and the index number identifying the position of that image in the file.<BR>The format should be: <I>filename,number</I>
<LI>NOTE: The index numbers are zero-based. The first icon image in a file is considered number 0, the second is number 1, and so forth.
<LI>If the file contains only one icon image, use an index number of 0.
<LI>You can also specify the icons to be used for the Recycle Bin when it is empty and full by changing the corresponding values under this same Registry key.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000058">
<IMG SRC="RegVal.gif">
The Empty value specifies the image file used as the Recycle Bin icon when the Recycle Bin is empty.
<UL>
<LI>The value specifies the full path to an ICO, EXE, or DLL file that contains icon images. EXE and DLL files may contain multiple icons. An index number following the file specification and separated from it by a comma specifies the location of the icon in the file. (See the default value for an example.)
</UL>
<UL><LI><I>Default value:</I> C:\WINDOWS\SYSTEM\SHELL.DLL,31</UL>
<UL>
<LI>To change the icon used for an empty Recycle Bin:
<LI>Change this value to specify the full path to the file containing the new image, and the index number identifying the position of that image in the file.<BR>The format should be: <I>filename,number</I>
<LI>NOTE: The index numbers are zero-based. The first icon image in a file is considered number 0, the second is number 1, and so forth.
<LI>If the file contains only one icon image, use an index number of 0.
<LI>You can also specify the default icon to be used for the Recycle Bin and the icon to use when it is full by changing the corresponding values under this same Registry key.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000059">
<IMG SRC="RegVal.gif">
The Full value specifies the image file used as the Recycle Bin icon when the Recycle Bin contains any deleted files.
<UL>
<LI>The value specifies the full path to an ICO, EXE, or DLL file that contains icon images. EXE and DLL files may contain multiple icons. An index number following the file specification and separated from it by a comma specifies the location of the icon in the file. (See the default value for an example.)
</UL>
<UL><LI><I>Default value:</I> C:\WINDOWS\SYSTEM\SHELL.DLL,32</UL>
<UL>
<LI>To change the icon used for a full Recycle Bin:
<LI>Change this value to specify the full path to the file containing the new image, and the index number identifying the position of that image in the file.<BR>The format should be: <I>filename,number</I>
<LI>NOTE: The index numbers are zero-based. The first icon image in a file is considered number 0, the second is number 1, and so forth.
<LI>If the file contains only one icon image, use an index number of 0.
<LI>You can also specify the default icon to be used for the Recycle Bin and the icon to use when it is empty by changing the corresponding values under this same Registry key.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000060">
<IMG SRC="RegVal.gif">
This (default) value specifies the image that will be used for the icon of all bitmap (BMP) files.
<UL>
<LI>The value specifies the full path to an ICO, EXE, or DLL file that contains icon images. EXE and DLL files may contain multiple icons. An index number following the file specification and separated from it by a comma specifies the location of the icon in the file. (See the default value for an example.)
</UL>
<UL><LI><I>Default value:</I> C:\Windows\System\cool.dll,41</UL>
<UL>
<LI>To change the default icon used for all bitmap (BMP) files:
<LI>Change this value to specify the full path to the file containing the new image, and the index number identifying the position of that image in the file.<BR>The format should be: <I>filename,number</I>
<LI>NOTE: The index numbers are zero-based. The first icon image in a file is considered number 0, the second is number 1, and so forth.
<LI>If the file contains only one icon image, use an index number of 0.
<LI>To make the icon for each bitmap appear as a miniature image of the bitmap itself, change this value to %1.
</UL>
<UL>
<LI><I>Note:</I> When the icons for bitmaps are miniature versions of the bitmaps themselves, it can slow down the display of new windows to folders that contain many bitmaps. Also, many bitmaps are virtually unrecognizable when presented as icons, unless the images were specifically designed to be icons.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000061">
<IMG SRC="RegVal.gif">
This (default) value controls which disk drive is searched by default when Find is started from the Windows Start menu.
<UL>
<LI>Find normally begins in the drive that contains Windows. You can change this behavior by customizing this value.
</UL>
<UL><LI><I>Default value:</I> [FindFolder("%l", %l)]<BR>NOTE: Lowercase letter L, not the number one, follows the percent sign.</UL>
<UL>
<LI>To change the drive that Find searches by default when started from the Windows Start menu, replace the %ls in this value with references to a specific drive.<BR>For example: [FindFolder("C:\",C:\)]
</UL>
<UL>
<LI>To change the drive that Find searches by default when started from the Windows Start menu, replace the %ls in this value with references to a specific drive.<BR>For example: [FindFolder("C:\",C:\)]
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000062">
<IMG SRC="RegVal.gif">
The NoDriveTypeAutoRun value controls whether the CD-ROM drive attached to the computer is run automatically whenever a new CD is inserted.
<UL>
<LI>For systems set up for multiple users, this value can be customized for each user of the system.
</UL>
<UL><LI><I>Default value:</I> 95 00 00 00</UL>
<UL>
<LI>To prevent CDs from being run automatically on insertion to the CD-ROM drive, change this value to BD 00 00 00.
</UL>
<UL>
<LI>To prevent CDs from being run automatically on insertion to the CD-ROM drive, change this value to BD 00 00 00.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000063">
<IMG SRC="RegKey.gif">
The Classes key defines specific file types and provides OLE, DDE, and other association information for these file types.

HKEY_CLASSES_ROOT is an alias that points to Hkey_Local_Machine\Software\Classes.
<UL>
<LI>HKEY_LOCAL_MACHINE\SOFTWARE\Classes includes three basic types of subkeys:<UL><LI>File extension subkeys that associate file extensions with defined file types<LI>File type subkeys that associate specific programs and actions with the file types<LI>OLE class identifiers (under subkey CLSID) that provide more information for OLE objects and documents</UL>
<LI>
Hkey_Classes_Root exists only to provide compatibility with the Windows 3.x registration database.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000064">
<IMG SRC="RegKey.gif">
The CurrentControlSet key contains information that controls Windows startup.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000065">
<IMG SRC="RegKey.gif">
The Control key contains data controlling system startup. It stores information such as the network name of the computer, the subsystems that need to be started with Windows, information on file system performance, and other startup parameters.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000066">
<IMG SRC="RegKey.gif">
The Services key contains information that controls how file systems, drivers, and other items are loaded and configured at startup. This key also determines the way in which these services call each other.
<UL>
<LI>This key lists the various device, service, and file system drivers that are loaded at startup.
<LI>
The subkeys include some common ones, such as the Arbitors subkey, and other subkeys that are only present for network service agents the user has chosen to install.
</UL>
<UL>
<LI><I>Note:</I> These values are maintained by the System and should not be changed directly in the Registry. Settings for drivers that appear under this key should be changed only from the Control Panel or using the system policy editor (for system administrators).
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000067">
<IMG SRC="RegKey.gif">
The ComputerName key stores the computer's name.
<UL>
<LI>This information is usually set by clicking Network in the Windows Control Panel and specifying the computer's name on the Identification tab.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000068">
<IMG SRC="RegKey.gif">
The FileSystem key stores settings used by the current disk performance profile.
<UL>
<LI>From the System option in Control Panel, users can choose the "Typical Role Of This Machine." Disk performance is optimized for the selected role by adjusting various disk and file system features.
<LI>
See also HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\FS Templates
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000069">
<IMG SRC="RegKey.gif">
The IDConfigDB key stores information about the hardware configurations that are defined for this machine.
<UL>
<LI>The values under this key show the names of the different configurations and indicate which of the configurations is currently in use.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000070">
<IMG SRC="RegKey.gif">
The keyboard layouts key contains a list of subkeys, each of which stores the name and associated keyboard driver for a particular language.
<UL>
<LI>This information is usually set by clicking Keyboard in the Windows Control Panel and choosing an option from the Language tab.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000071">
<IMG SRC="RegKey.gif">
The MediaResources key contains driver and other information on multimedia components.
<UL>
<LI>These settings are usually changed by clicking Multimedia in the Windows Control Panel.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000072">
<IMG SRC="RegKey.gif">
The NetworkProvider key contains descriptions of network  providers. The HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services branch of the Registry contains the actual .DLL and settings of the network providers referred to under this key.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000073">
<IMG SRC="RegKey.gif">
The Nls key contains data about national language support, such as language and local preferences.
<UL>
<LI>This information is usually set through the Control Panel's Keyboard option.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000074">
<IMG SRC="RegKey.gif">
The PerfStats key contains data about system components.
<UL>
<LI>This data is descriptive in nature, and used by the System Monitor program (SYSMON.EXE) to name and describe the various statistics. Information under this key includes no actual performance statistics, which are constantly changing.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000075">
<IMG SRC="RegKey.gif">
The Print key contains data about the available printers, their associated printer drivers, and the printing environment.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000076">
<IMG SRC="RegKey.gif">
The Environments key contains data about printer drivers and print processes for different operating systems.
<UL>
<LI>For additional information on the subkeys and values under this key, contact your printer manufacturer or printer driver provider.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000077">
<IMG SRC="RegKey.gif">
The Monitors key contains data about network print monitors.
<UL>
<LI>For additional information on the subkeys and values under this key, contact your printer manufacturer.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000078">
<IMG SRC="RegKey.gif">
The Printers key stores current settings for the available printers.
<UL>
<LI>The information in this key includes many of those settings usually specified from the printer Properties dialog box.
<LI>
For additional information on the subkeys and values under this key, contact your printer manufacturer.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000079">
<IMG SRC="RegKey.gif">
The Providers key lists the DLLs used to print over networks
<UL>
<LI>For additional information on the subkeys and values under this key, contact your printer manufacturer or network provider.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000080">
<IMG SRC="RegKey.gif">
The SessionManager key contains information about applications that may not run well under Windows 95.
<UL>
<LI>The information under this key includes references to patches or workarounds for known application problems. Additionally, there are  listings of DLLs that should be checked to ensure they are up to date and listings of DLLs used by the Windows Session Manager.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000081">
<IMG SRC="RegKey.gif">
The TimeZoneInformation  key contains data about the system's current  time zone settings.
<UL>
<LI>This information is usually set through the Control Panel's Date/Time option.
<LI>
See also HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Time Zones.
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000082">
<IMG SRC="RegKey.gif">
The Update key records whether the current version of Windows 95 was installed over an earlier version of Windows.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000083">
<IMG SRC="RegKey.gif">
The VMM32Files key lists VxD files that are combined in the VMM32.VXD virtual device driver.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000084">
<IMG SRC="RegVal.gif">
The DisplayName value stores the program name as it will be displayed in the Add/Remove Programs dialog box.
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000085">
<IMG SRC="RegVal.gif">
The UninstallString value specifies the full path to the program that should be used to uninstall a specific application. If the uninstaller program requires any command-line parameters, they are also specified here.
<UL>
<LI>Some manufacturers provide their own uninstall utility for their applications. This value allows the Windows Add/Remove Programs applet to efficiently remove installed applications and clear associated Registry entries.
</UL>
<UL>
<LI><I>Note:</I> If you delete this value, it may be difficult to completely remove the associated application and all its components from your system in the future.
</UL>
<UL>
<LI><I>Note:</I> If you delete this value, it may be difficult to completely remove the associated application and all its components from your system in the future.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000086">
<IMG SRC="RegKey.gif">
The App Paths key includes subkeys for installed 32-bit Windows applications. The subkeys specify the paths to the associated applications.
<UL>
<LI>This key provides 32-bit program location information to Windows. It provides functionality analogous to what the PATH environment variable did for MS-DOS. Under Windows, however, the stored path information is application-specific.
<LI>
The (default) value under each application subkey specifies the full path to the associated program file.
<LI>
Subkeys for applications may also include a Path value which Windows uses to set the application-specific path. This path specifies the folder the application will search first when looking for associated files.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000087">
<IMG SRC="RegKey.gif">
This key contains one complete set of hardware configuration information. The information under this key is a duplicate of HKEY_CURRENT_CONFIG.
<UL>
<LI>Some computers are set up with multiple alternate hardware configurations. There is a unique, numbered subkey under Config for each configuration. For example, a portable computer may have one hardware configuration for use on the road, and another for use when the computer is docked.
<LI>
Each of the configurations appears on the Hardware Profiles tab when you click System in the Control Panel.
<LI>
Normally, Windows selects the appropriate configuration automatically. If it cannot determine the correct configuration to use at start up, the user is prompted to choose one.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000088">
<IMG SRC="RegKey.gif">
The Display key contains information about the display hardware configuration.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000089">
<IMG SRC="RegKey.gif">
The Fonts key contains information about the fonts used by the display hardware.  The values are detected by the system on bootup.
<UL>
<LI>The values stored under this key specify the files that contain the various fonts that may be used by the display.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000090">
<IMG SRC="RegVal.gif">
The Mouse Trails value determines whether the mouse cursor leaves a trail as it is dragged around the desktop.
<UL>
<LI>Mouse trails can make the cursor easier to follow on laptop computer displays.
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 1-7</UL>
<UL>
<LI>To turn on mouse trails or adjust their length, set this value to a number between 1 and 7, where 1 is the shortest and 7 is the longest trail.<BR>A value of 0 turns off mouse trails.
<LI>You can also control mouse trails from the Windows Control Panel.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000091">
<IMG SRC="RegKey.gif">
The Config Manager key represents a record stored in RAM of the current system configuration.
<UL>
<LI>This key is created whenever the system starts and is updated whenever changes occur to the system configuration. The information is dynamically updated, so it is always current.
<LI>
Much of the information in this key is mapped  from HKEY_LOCAL_MACHINE\Enum.
</UL>
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000092">
<IMG SRC="RegKey.gif">
The PerfStats key contains data for monitoring performance of various system and network components, packets in and out, process threads, and VMM and swap file settings.
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000093">
<IMG SRC="RegKey.gif">
The Settings key stores display driver configuration information including BitsPerPixel (color depth), logical and physical dots per inch (dpi), default font, and display resolution mode detected by the system during bootup.
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000094">
<IMG SRC="RegKey.gif">
The SharedDLLs key contains a value for each shared DLL or other shared program resource.
<UL>
<LI>Each shared DLL has a corresponding "use counter" value under this key. The counter is incremented whenever a new program is installed that uses the DLL. The counter is decremented whenever a program that uses the DLL is uninstalled from the system. When the last program that uses a DLL is uninstalled, the user is given the option of deleting the DLL from the system to save disk space.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000095">
<IMG SRC="RegKey.gif">
The Fonts key stores information about the fonts currently available in Windows.
<UL>
<LI>The value names reflect the full names of the fonts, while the values themselves are the names of the corresponding font files. If a value does not include a full path, Windows assumes the named font file is in the Windows\Fonts folder.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000097">
<IMG SRC="RegKey.gif">
The Fontsize key stores the lists of raster font files that are used for display at different screen resolutions.
<UL>
<LI>Raster fonts, also known as bitmap fonts, are stored and drawn as arrays of dots. Raster fonts are resolution-dependent. Unlike TrueType fonts, raster fonts cannot be scaled or rotated. Because raster fonts cannot be scaled or rotated, you must have different sets of raster fonts (different font files) if you want to display fonts at different point sizes, resolutions, or on different display devices.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000098">
<IMG SRC="RegKey.gif">
The FS Templates key stores settings used to optimize performance for the three possible roles of the computer.
<UL>
<LI>From the System option in Control Panel, users can choose the "Typical Role Of This Machine." Disk performance is optimized for the selected role by adjusting various disk caching features. The subkeys under FS Templates store the settings for these different computer roles.
<LI>
See also, HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000099">
<IMG SRC="RegKey.gif">
The Microsoft key stores information about Microsoft software (including Windows itself) that is installed on the machine.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000100">
<IMG SRC="RegKey.gif">
The Windows key stores information used to configure Microsoft Windows.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000101">
<IMG SRC="RegKey.gif">
The Current Version key stores information for the currently installed version of Windows and includes all the subkeys used to store Windows configuration information.
<UL>
<LI>The root entries include product ID#, registered user, and organization entered during the setup process.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000102">
<IMG SRC="RegKey.gif">
This key stores customized configuration information for one registered user of this machine.
<UL>
<LI>Only machines configured for multiple-users include more than one subkey under HKEY_USERS.
<LI>
Computers configured as single-user machines include only a .Default subkey under HKEY_USERS, which stores all the user-specific configuration information.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000103">
<IMG SRC="RegKey.gif">
The Software key stores configuration information for installed applications.
<UL>
<LI>The structure under this key follows the same organization as that under Hkey_Local_Machine\Software, but contains user-specific application configuration information.
<LI>
For systems set up for multiple users, the subkeys and  values under this key are specific for each user of the system.  Those under HKEY_USERS\.Default provide a template used initially for new users of the system.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000104">
<IMG SRC="RegKey.gif">
The AppEvents key stores the names of defined Windows events to which specific sounds may be attached and the current and default sound files associated with those events.
<UL>
<LI>For systems set up for multiple users, these values can be customized for each user of the system.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000105">
<IMG SRC="RegKey.gif">
The Control Panel key stores settings for the various Control Panel applets.
<UL>
<LI>Some of this information was stored in the WIN.INI and CONTROL.INI initialization files under Windows 3.x.
<LI>
For systems set up for multiple users, these values are customized to reflect the settings for each user of the system. In this case, the values appear under each user's personalized profile under HKEY_USERS.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000106">
<IMG SRC="RegKey.gif">
The keyboard layout key defines the currently active keyboard layout.
<UL>
<LI>For systems set up for multiple users, the subkeys and values under this key can be specific to each user of the system.
</UL>
<UL>
<LI><I>Note:</I> This key should be set only by using the Keyboard option in the Windows Control Panel.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000107">
<IMG SRC="RegKey.gif">
The Network key contains information about persistent and recent network connections.
<UL>
<LI>For systems set up for multiple users, the subkeys and values under this key can be specific to each user of the system.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000108">
<IMG SRC="RegKey.gif">
The Controls Folder key contains information about the Windows Control Panel.
<UL>
<LI>Existing Control Panel applets can be extended to add new functionality.  By adding new subkeys under Controls Folder, manufacturers can add new options or new property sheets (dialog box tabs) to existing Control Panel applets.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000109">
<IMG SRC="RegKey.gif">
The ICM key stores image color matching  information, that helps some output devices produce better color output.
<UL>
<LI>ICM technology makes use of a profile that specifies the color properties of the associated peripheral input or output device (such as a scanner, monitor, or printer).
<LI>
Applications that use ICM technology can provide better consistency between the colors displayed on-screen and the colors generated by output devices.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000110">
<IMG SRC="RegKey.gif">
The Detect key contains a date and time stamp from the installation of the current version of Windows.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000111">
<IMG SRC="RegKey.gif">
The explorer key contains information used by the Windows Explorer.
<UL>
<LI>Explorer can be extended, as by adding a custom Find utility to the Start menu, by adding information under this key.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000112">
<IMG SRC="RegKey.gif">
The Extensions key duplicates the information found in the [Extensions] section of WIN.INI.
<UL>
<LI>This key includes values only if you have installed your version of Windows over Windows 3.x.
<LI>
In Windows 3.x this information determined the programs that were associated with specific file types, and automatically launched when files of those types were double-clicked.
<LI>
In current versions of Windows, the file association information in HKEY_LOCAL_MACHINE\SOFTWARE\Classes takes precedence over this information.
</UL>
<UL>
<LI><I>Note:</I> Because this information is superseded in current versions of Windows, changes to the values under this key may have no effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000113">
<IMG SRC="RegKey.gif">
The MS-DOS Emulation key contains subkeys for Windows compatible DOS applications.
<UL>
<LI>The values under individual keys may include settings for associated overlays, configuration files, batch files, and so on.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000114">
<IMG SRC="RegKey.gif">
The Network key stores information about the installed networks, including information about the installed network card, network clients, and network transports.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000115">
<IMG SRC="RegKey.gif">
The Nls key stores data used for Windows support of multiple national  languages and keyboards layouts.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000116">
<IMG SRC="RegKey.gif">
The LanMan key contains information about any folders that are currently shared for peer-to-peer networking.
<UL>
<LI>This key stores information about shared folders on this machine, such as the share name, the path to the shared folder, the access type (read-only, full access, or password protection), and the encrypted access passwords.
<LI>
LanManonly appears if you have specified File And Printer Sharing For Microsoft Networks in your network setup (Network applet under Control Panel), and have subsequently shared a folder or printer on the network.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000117">
<IMG SRC="RegVal.gif">
The HideSharePwds value controls whether Windows uses asterisks to replace characters that users type when specifying a password for access to a shared resource.
<UL>
<LI>If you have specified File And Printer Sharing For Microsoft Networks in your network setup (Network applet under Control Panel), you can share your folders with other users on your Microsoft network. Using the Sharing tab of the folder's Properties, you can specify password-protected access. HideSharePwds controls whether asterisks appear in the Password field as you type in the password, or as other users type in the password to access your shared folder.
</UL>
<UL><LI><I>Default value:</I> binary 1</UL>
<UL>
<LI>To turn off the asterisks, such that passwords are not hidden as they are typed in, set this value to binary zero.
</UL>
<UL>
<LI><I>Note:</I> If you turn off the password hiding, anyone looking over your shoulder at your screen will be able to see the password you type in. This could be a breach of security.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000119">
<IMG SRC="RegKey.gif">
The Policies key is a placeholder for hardware restrictions configured by a network administrator through the Systems Policy Editor.
<UL>
<LI>The policy file Config.pol is maintained on the file server, and settings are copied into the local machine and user registry keys on logon.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000120">
<IMG SRC="RegKey.gif">
The ProfileList key exists on machines that have been configured for multiple users. It includes subkeys for each registered user of the machine that contain user-specific configuration information.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000121">
<IMG SRC="RegKey.gif">
This subkey includes user-specific configuration information.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000122">
<IMG SRC="RegKey.gif">
The Run key specifies programs that are to be started automatically whenever Windows starts.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000123">
<IMG SRC="RegKey.gif">
The RunOnce key stores information about programs that have been designated to run only the first time Windows is started after installation.
<UL>
<LI>This key is employed when System Administrators want to have additional programs installed and run automatically when network users install Windows over the network. This information is transferred to the registry from the program's information (INF) file.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000124">
<IMG SRC="RegKey.gif">
The RunServices key specifies programs that are to be started automatically at boot time, before a user has logged in to the system.
<UL>
<LI><I>Note:</I> Because this key specifies programs that are to be starte <I>before</I> a user logs onto the system, these applications must not make assumptions about any networking permissions or network resource availability.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000125">
<IMG SRC="RegKey.gif">
The RunServicesOnce key specifies programs that are to be started automatically the first time Windows is started after installation and before a user has logged in to the system.
<UL>
<LI>Values under this key are deleted after the application is launched, so they will be run automatically only one time.
</UL>
<UL>
<LI><I>Note:</I> Because this key specifies programs that are to be started <I>before</I> a user logs onto the system, these applications must not make assumptions about any networking permissions or network resource availability.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000126">
<IMG SRC="RegKey.gif">
The Setup key stores values used by the Windows Setup program and includes subkeys for a multitude of optional components and settings for customization.
<UL>
<LI>Each subkey includes an .INF file and section reference, as well as an installed value (0 = not installed, 1= installed)
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000127">
<IMG SRC="RegKey.gif">
The Shell Extensions key contains the named values of  CLSIDs of  registered shell extension applications.
<UL>
<LI>Companion registy entries will be found under the HKEY_CLASSES_ROOT\*\shellex\? or HKEY_LOCAL_MACHINE\SOFTWARE\Classes\*\shellex\  key. The subkey location will vary depending on the type of shell extension being implemented.  
<LI>
The Windows shell supports several types of extensions referred to as handlers which allow various operations to be performed with objects in the shell. 
<LI>
Norton Navigator is an example of an application that uses the Shell Extensions.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000918">
<IMG SRC="RegKey.gif">
The desktop key contains settings for the screen saver, wallpaper, and background patterns that appear in the Windows desktop.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000128">
<IMG SRC="RegKey.gif">
The ShellScrap key contains subkeys mapping DLL and EXE files as well as shell extensions supporting scrap file operations.
<UL>
<LI>Windows allows you to transfer objects within a file, such as a spreadsheet graph, to the desktop or a folder.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000129">
<IMG SRC="RegKey.gif">
The Time Zones key stores information about Windows' currently available time zones.
<UL>
<LI>Each subkey represents a time zone that may be set from the Windows Control Panel.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000130">
<IMG SRC="RegVal.gif">
This (Default) value specifies the currently selected time zone.
<UL>
<LI>This value is typically set during Windows installation, and modified through the Windows Control Panel.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000131">
<IMG SRC="RegKey.gif">
This key stores information on a specific world time zone that Windows knows about.
<UL>
<LI>Information stored here includes values that determine how Windows will adjust its system time for this zone, and how the Windows Control Panel will display the time zone on its map.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000132">
<IMG SRC="RegVal.gif">
The Display value stores the title that will be displayed for this time zone.
<UL>
<LI>The title appears above the time zone map in the Windows Control Panel.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000133">
<IMG SRC="RegVal.gif">
The Dlt value stores the name that appears for this time zone when Daylight Savings Time is in effect.
<UL>
<LI>This name appears on the Date and Time tab of the Windows Control Panel.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000134">
<IMG SRC="RegVal.gif">
The Std value stores the name that appears for this time zone when Standard (non-Daylight Savings) Time is in effect.
<UL>
<LI>This name appears on the Date and Time tab of the Windows Control Panel.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000135">
<IMG SRC="RegVal.gif">
The MapID value stores coordinate information used by the time zone map in the Windows Control Panel.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000136">
<IMG SRC="RegVal.gif">
The TZI value stores time zone information used to adjust the Windows clock and calendar for this time zone.
<UL>
<LI>This value is "decoded" to obtain the values stored under HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TimeZoneInformation that are used to set the windows clock and calendar.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000137">
<IMG SRC="RegKey.gif">
The NetDDE key contains settings for network dynamic data exchange.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000138">
<IMG SRC="RegKey.gif">
The Arbitrators key contains information used to prevent conflicts for system resources.
<UL>
<LI>There are subkeys for address, DMA addresses, IRQ numbers, and I/O addresses.  The system uses these subkeys to prevent device contention problems.
</UL>
<UL>
<LI><I>Note:</I> Avoid making changes to settings in this area.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000139">
<IMG SRC="RegKey.gif">
The Class key contains information about  the types of devices supported by  the operating system, such as the display, keyboard, mouse, and disk drives.
<UL>
<LI>Subkeys for each device, will in turn potentially have many additional subkeys and setting switches.
<LI>
For instance the net key contains subkeys that include the network adapter type, driver name and location, I/O address, packet transmit value, and other settings.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000140">
<IMG SRC="RegKey.gif">
The MSNP32 key contains information about the 32-bit Microsoft Network provider.
<UL>
<LI>This key specifies the path to the network client program, and includes information used for logon authentication and other security provisions.
</UL>
<UL>
<LI><I>Note:</I> Do not change these settings with the Registry Editor
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000141">
<IMG SRC="RegKey.gif">
The NWNP32 key contains information about the 32-bit NetWare Network provider.
<UL>
<LI>This key specifies the path to the network service provider, and includes information used for logon authentication and other security provisions.
</UL>
<UL>
<LI><I>Note:</I> Do not change these settings with the Registry Editor
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000142">
<IMG SRC="RegKey.gif">
The VxD key contains subkeys for all virtual device drivers.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000143">
<IMG SRC="RegKey.gif">
The RemoteAccess key includes information used for the Dial-Up Networking feature.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000001">
<IMG SRC="RegKey.gif">
The HKEY_LOCAL_MACHINE key contains hardware and software configuration information specific to this computer.
<UL>
<LI>The subkeys and values under this key include information detected automatically by Windows  and provided by the user during setup, together with information on any new devices that have been installed since.
<LI>
This information is used by Windows , software device drivers, Plug and Play hardware devices, and software applications.
<LI>
The information in HKEY_LOCAL_MACHINE applies to all users of this machine.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000002">
<IMG SRC="RegKey.gif">
The HKEY_USERS and HKEY_CURRENT_USERS keys contain user configuration information.
<UL>
<LI>The default subkey (.Default) under HKEY_USERS contains generic information.
<LI>
An additional subkey may contain specific configuration information for the current user.
<LI>
The HKEY_CURRENT_USERS key contains a copy of this specific configuration information if it exists. Otherwise, it contains a copy of the default information.
<LI>
When a registered user logs on to a computer that is configured for multiple users, a unique subkey is generated from that user's profile. This subkey holds user-specific configuration information. When the user logs off, the unique subkey is removed.
<LI>
If an unregistered user logs on, a new profile is created from the default user information, and stored under WINDOWS/PROFILES.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000003">
<IMG SRC="RegKey.gif">
The HKEY_CURRENT_CONFIG key contains hardware configuration information from one of the numbered subkeys under HKEY_LOCAL_MAHCINE\Config. It contains non-user-specific configuration information, such as where a particular application finds its data and support files. You may establish multiple configuration sets.
<UL>
<LI>If a computer is set up for multiple hardware configurations, each such configuration has a unique numbered subkey under the HKEY_LOCAL_MACHINE\Config key. For example, a portable computer may have a docked (0001) and an undocked (0002) subkey. Depending upon how the system is booted, one of these will appear under HKEY_CURRENT_CONFIG.
<LI>
This key is really just an alias for the information contained in HKEY_LOCAL_MACHINE\Config. Changes to either place are reflected in the other.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000004">
<IMG SRC="RegKey.gif">
The HKEY_CLASSES_ROOT key contains object linking and embedding (OLE) and file-class association data (equivalent to the Registry in Windows for MS-DOS).
<UL>
<LI>This key is really just an alias for HKEY_LOCAL_MACHINE\SOFTWARE\Classes. Changes to either place are reflected in the other.
<LI>
HKEY_CLASSES_ROOT exists only to provide compatibility with the Windows 3.x registration database.
</UL>
<UL>
<LI><I>Note:</I> This is a root key and cannot be deleted from the registry. All root keys contain the handle HKEY_ which allows other programs to attach themselves to it.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000005">
<IMG SRC="RegKey.gif">
The HKEY_CURRENT_USER key contains configuration information about the user currently logged on to this computer.
<UL>
<LI>This key is really just an alias for the branch of HKEY_USERS belonging to the user who is currently logged on to the machine. Changes to either place are reflected in the other.
<LI>
If there is only one registered user for this machine this key is an alias for HKEY_USERS\Default.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000006">
<IMG SRC="RegKey.gif">
The HKEY_DYN_DATA key contains dynamic status information for various hardware devices connected to this computer.
<UL>
<LI>This information, stored in your computers memory, changes rapidly to reflect the current state of your system.
<LI>
This key helps facilitate Windows 95 Plug and Play functionality.
</UL>
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000007">
<IMG SRC="RegKey.gif">
The Config key contains one or more profiles describing the configuration of the hardware attached to  this computer. You may establish multiple hardware profiles to reflect alternate hardware configurations.
<UL>
<LI>Multiple hardware profiles are needed when you use your computer with more than one possible set of hardware or network connections. An example of a computer with multiple hardware configurations would be a laptop computer that may be run independently or connected to a docking station. Windows selects the appropriate configuration to use based on the hardware it senses on starting.
<LI>
HKEY_CURRENT_CONFIGURATION is an alias to HKEY_LOCAL_MACHINE\Config. Changes to either place are reflected in the other.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000008">
<IMG SRC="RegKey.gif">
The Enum key contains detailed information about hardware devices connected to this computer.
<UL>
<LI>This key helps facilitate Windows 95 Plug and Play functionality.
<LI>
This information includes both current and historical listings of your system hardware. Consequently, this key stores a record of all hardware that has been installed on this machine, whether the specific hardware is currently present or not.
</UL>
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000009">
<IMG SRC="RegKey.gif">
The Hardware key contains information about serial ports and modems.
<UL>
<LI>In Windows 95 the hardware key is largely unused.
<LI>
Detailed hardware information is contained in HKEY_LOCAL_MACHINE\Enum.
<LI>
Detailed dynamically updated hardware information is contained in HKEY_DYN_DATA.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000010">
<IMG SRC="RegKey.gif">
The Network key contains configuration information collected when you log on to a local area network (LAN).
<UL>
<LI>This key stores both Windows 95 and local area network (LAN) logon information.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000011">
<IMG SRC="RegKey.gif">
The Security key contains remote computing access control information including the default server name for network logon.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000012">
<IMG SRC="RegKey.gif">
The SOFTWARE key contains general configuration information about locally installed software, including Windows 95 and its applets. (User-specific information about application configurations is stored under Hkey_Current_User\Software.)
<UL>
<LI>Installed applications have corresponding subkeys that record information under this key in the format:<BR>HKEY_LOCAL_MACHINE\Software\<I>CompanyName\ProductName\Version\product-specific subkeys</I>
<LI>
Windows version 3.1 and earlier stored this information in initialization (ini) files. Windows 95 supports the use of initialization files for compatibility with older applications that still require them.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000013">
<IMG SRC="RegKey.gif">
The HKEY_LOCAL_MACHINE\System key contains information that controls Windows 95 system behavior. This information is grouped into sets of controls containing parameters for device drivers and services that can be loaded with Windows 95.
<UL>
<LI>Configuration settings contained in this key are always in force, regardless of the current user or hardware profile.
<LI>
Some information stored under this key may have been taken directly from the SYSTEM.INI file, if Windows is installed over a previous version.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000014">
<IMG SRC="RegKey.gif">
The HKEY_USERS\.Default key contains generic user information, such as desktop configuration.
<UL>
<LI>If the machine is configured as a single-user machine, this key contains all of the user-specific information.
<LI>
If the machine is configured for multiple-users, the information in this key is used as the basis for creating new user profiles, which are then stored in the user's personal subkey under HKEY_USERS. This user-specific information may be subsequently customized for each user of the system.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000015">
<IMG SRC="RegVal.gif">
The MinAnimate value controls whether or not Windows animates windows while maximizing or minimizing them.
<UL>
<LI>Animated windows appear to zoom into or out of the Taskbar when minimized or maximized.
<LI>
Turning off window animation improves system speed, somewhat.
<LI>
For systems set up for multiple users, this value can be customized for each user of the system.
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0 -1</UL>
<UL>
<LI>To turn off the maximize and minimize animation effect, set this text value to 0.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000016">
<IMG SRC="RegVal.gif">
The NameNumericTail value controls how Windows truncates long filenames for compatibility with earlier versions of DOS and Windows.
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0 - 1</UL>
<UL>
<LI>To turn off numeric tail file names, set this binary value to 0.<BR>Windows will subsequently use tildes and numbers in truncated filenames only when there is a conflict with a preexisting filename.
</UL>
<UL>
<LI><I>Note:</I> Many Windows applications are hardwired to look for folder names employing the tilde-and-number truncation. If you turn this truncation scheme off, some applications may not function correctly.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000017">
<IMG SRC="RegVal.gif">
The IsShortcut value controls whether or not the shortcut graphic is superimposed  on  icons that are shortcuts to Windows 95 applications.
<UL>
<LI>Suppressing the shortcut graphic displays the icon graphic completely unobscured.
</UL>
<UL>
<LI>To suppress the shortcut graphic on icons that are shortcuts to Windows 95 applications, rename or delete this value.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000018">
<IMG SRC="RegVal.gif">
This IsShortcut value controls whether or not the shortcut graphic is superimposed on icons that are shortcuts to DOS applications.
<UL>
<LI>To suppress the shortcut graphic on icons that are shortcuts to DOS applications, rename or delete this value.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000019">
<IMG SRC="RegVal.gif">
The NoRun value controls whether or not the Run command appears in the Windows 95 Start menu.
<UL>
<LI>For systems set up for multiple users, this value can be customized for each user of the system.
</UL>
<UL><LI><I>Default value:</I> binary 0</UL>
<UL><LI><I>Valid range:</I> binary 1</UL>
<UL>
<LI>To suppress the Run command in the Windows 95 Start menu, set this value to 1.
</UL>
<UL>
<LI><I>Note:</I> Suppressing the Run command disallows the use of the Windows 95 Run dialog box.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000020">
<IMG SRC="RegVal.gif">
The NoNetHood value controls whether or not the Network Neighborhood icon appears on the Windows 95 desktop.
<UL>
<LI>For systems set up for multiple users, this value can be customized for each user of the system.
</UL>
<UL>
<LI>To hide the Network Neighborhood icon, set this DWORD value to 1.
<LI>To restore the Network Neighborhood icon, remove this value, or set it to 0.
</UL>
<UL>
<LI><I>Note:</I> You or your applications may not be able to access network drives that are not specifically mapped to a drive letter when the Network Neighborhood icon is suppressed.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000021">
<IMG SRC="RegVal.gif">
The MenuShowDelay value controls how long Windows 95 waits before displaying successive cascading menu layers when you point to them with your mouse.
<UL>
<LI>Turning off the automatic cascade altogether prevents the cascaded menus from disappearing if the mouse strays off of them.
<LI>
For systems set up for multiple users, this value can be customized for each user of the system.
</UL>
<UL><LI><I>Valid range:</I> 1 - 10, 65534</UL>
<UL>
<LI>To adjust the delay time, set this to a non-zero value. A value of 1 specifies the shortest delay time.
<LI>To turn off the automatic menu cascades altogether, set the value to 65534. Thereafter, menus will only cascade when you explicitly click on a menu item containing a nested menu.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000022">
<IMG SRC="RegVal.gif">
The SourcePath value specifies where Windows 95 looks for its original setup files when installing or modifying Windows components.
<UL>
<LI>This is useful when you have installed Windows from one setup file location, such as a CDROM drive, but now want to modify your installation using another setup file  location, such as a network drive.
</UL>
<UL>
<LI>To indicate a new drive or network location for the Windows 95 setup files change this value to the new location.
</UL>
<UL>
<LI>Changes take effect immediately.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000023">
<IMG SRC="RegKey.gif">
This key controls whether the Inbox icon appears on the Windows 95 desktop.
<UL>
<LI>To hide the Inbox icon, rename or delete this key.
</UL>
<UL>
<LI><I>Note:</I> You will not be able to use Microsoft Exchange for email and faxes if you hide the Inbox icon.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000024">
<IMG SRC="RegKey.gif">
This key controls whether the Microsoft Network icon appears on the Windows 95 desktop.
<UL>
<LI>To hide the Microsoft Network icon, rename or delete this key.
</UL>
<UL>
<LI><I>Note:</I> You will not be able to use Microsoft Exchange for email and faxes if you hide the Microsoft Network icon.
</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000210">
<IMG SRC="RegKey.gif">
The ComputerName key shows the computer's name.
<UL>
<LI>To change the computer name:<BR>
<OL>
<LI>Double-click the Network icon in the Control Panel.
<LI>Click the Identification tab and click Change.
<LI>Enter the new name and click OK.
</OL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000212">
<IMG SRC="RegVal.gif">
The ComputerName value stores the computer's name.
<UL>
<LI>To change the computer name:<BR>
<OL>
<LI>Double-click the Network icon in the Control Panel.
<LI>Click the Identification tab and click Change.
<LI>Enter the new name and click OK.
</OL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000221">
<IMG SRC="RegKey.gif">
The Exception key contains a list of files, port designators, and modules that SymEvent ignores.
<UL>
<LI>SymEvent is the Symantec event handler. It is a low-level system module that monitors file and disk operations on behalf of a number of Symantec programs. SymEvent allows these programs to receive notifications of system events.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000225">
<IMG SRC="RegVal.gif">
The FileName key contains the full path to the data file used by Norton Undo.
<UL>
<LI>Norton Undo lets you reverse file and folder operations.
<LI>
You can always use Undo from the Norton File Manager Edit menu to undo operations you performed in File Manager.
<LI>
If you select Track All Windows 95 File Operations from the Norton Navigator Control Center, you can also reverse file and folder operations that you performed in Explorer or from the desktop.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000226">
<IMG SRC="RegKey.gif">
The Exception key lists the file types that  Norton Undo ignores.
<UL>
<LI>Norton Undo lets you reverse file and folder operations.
<LI>
You can always use Undo from the Norton File Manager Edit menu to undo operations you performed in File Manager.
<LI>
If you select Track All Windows 95 File Operations from the Norton Navigator Control Center, you can also reverse file and folder operations that you performed in Explorer or from the desktop.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000299">
<IMG SRC="RegKey.gif">

<!-- Norton End ><HR>
 
<!-- Norton Start = "0000606">
<IMG SRC="RegVal.gif">
Password specifies the password used for screen savers in an encrypted format.
<UL>
<LI>In other words, if a password exists it is placed here after running it through an encryption algorithm. Then, when a password is entered while using the screen saver, it is also encrypted and then compared to the password stored here. If the encrypted passwords match then so do the original passwords.
</UL>
<UL>
<LI><I>Note:</I> You should only change this setting using  Control Panel since the password placed here is already encrypted.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000607">
<IMG SRC="RegKey.gif">
PROGMAN.INI file settings control the behavior of Windows Program Manager.
<UL>
<LI>Although the Program Manager has been replaced by the Windows 95 desktop and the Start button menus, Program Manager settings are still maintained. 
<LI>

<LI>
You can still run Program Manager from the Run menu command line.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000608">
<IMG SRC="RegKey.gif">
Identifies the groups that appear in the Program Manager window.
<UL>
<LI>Groupinteger=filename
<LI>
Specifies the filename that a particular group is associated with.
<LI>
The number is a number assigned to a group as it is created by Program Manager. The group numbers may not be in any particular sequence, since various groups are often deleted while others are created.
<LI>
The value of filename is the full path and filename of the .GRP file.
</UL>
<UL>
<LI><I>Note:</I> This section is retained for compatibilty reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000609">
<IMG SRC="RegKey.gif">
The restrictions section restricts  access to certain Program Manager commands. This section is typically used only by System Administrators.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000434">
<IMG SRC="RegKey.gif">
The Unknown key is a placeholder for other devices with no predefined classification.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000449">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This section is retained for compatibilty reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000450">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This section is retained for compatibilty reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000455">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This section is retained for compatibilty reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000456">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This section is retained for compatibilty reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000457">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This section is retained for compatibilty reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000460">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This section is retained for compatibilty reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000461">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This section is retained for compatibilty reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000462">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This section is retained for compatibilty reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000507">
<IMG SRC="RegKey.gif">
The AppPatches key contains references to specific applications and binary patches to fix problems with particular programs.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000919">
<IMG SRC="RegVal.gif">
The SerialIgnoreDSR value can be added if a modem or other serial device does not initialize correctly because the data set ready (DSR) is not initially set.
<UL>
<LI>The SerialIgnoreDSR value does not appear by default and would need to be added to the Registry.
</UL>
<UL>
<LI>To force the machine to ignore the DSR setting of a modem or other serial device:
<OL>
<LI>Create SerialIgnoreDSR  as a DWORD value.
<LI>Set the value to a non-zero integer.
</OL>
</UL>
<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000920">
<IMG SRC="RegVal.gif">
The SerialUse56000 value changes the default serial speed from 57,600 to 56,000 if a device cannot make a connection at the 57,600 setting.
<UL>
<LI>When a serial connection can be made at 38,400 and at 115,000 bps, but not at 57,600, add the SerialUse56000 value to the registry to force the modem to connect at 56000 bps when 57,600 is selected.
</UL>
<UL>
<LI>To use 56,000 bps as the serial speed 
<OL>
<LI>Create SerialUse56000  as a DWORD value.
<LI>Set the value to a non-zero integer.
</OL>
</UL>
<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000463">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000467">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000469">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000470">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000471">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000473">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000474">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000475">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000476">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000477">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000478">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000481">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000484">
<IMG SRC="RegKey.gif">

<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000512">
<IMG SRC="RegKey.gif">
The KnownDLLs key is a list of 32 bit DLL files.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000513">
<IMG SRC="RegKey.gif">
The WarnVerDLLs key includes references to specific DLLs or drivers with the potential to cause problems.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000520">
<IMG SRC="RegKey.gif">
The Navigator key contains subkeys and values used by Norton Navigator.
<UL>
<LI>These subkeys and values store information that applies to any users of this system. The subkeys and values under HKEY_CURRENT_USER\Software\Symantec\Navigator store information that is user-specific.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000523">
<IMG SRC="RegKey.gif">
The Indexing key contains subkeys and values used by Norton Indexing.
<UL>
<LI>Norton Indexing indexes selected files to greatly speed text searches by Norton FastFind. You can create several different indexes for different purposes.
<LI>
The subkeys and values under this key store configuration information for Norton Indexing, the names and locations of indexes you have created, and the location of associated index file data.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000524">
<IMG SRC="RegKey.gif">
The Install key contains subkeys and values pertaining to the Norton Navigator installation.
<UL>
<LI>Data stored under this key describes whether installation of the various components was successful, and path to the folder in which Navigator was installed.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000529">
<IMG SRC="RegKey.gif">
The Navigator key contains subkeys and values used by Norton Navigator.
<UL>
<LI>These subkeys and values store user-specific information used by Norton Navigator. The subkeys and values under HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator store information that is not user-specific.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000530">
<IMG SRC="RegVal.gif">

<UL>
<LI>These subkeys and values store user-specific information used by Norton Navigator. The subkeys and values under HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator store information that is not user-specific.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000531">
<IMG SRC="RegVal.gif">

<UL>
<LI>These subkeys and values store user-specific information used by Norton Navigator. The subkeys and values under HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator store information that is not user-specific.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000532">
<IMG SRC="RegVal.gif">

<UL>
<LI>These subkeys and values store user-specific information used by Norton Navigator. The subkeys and values under HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator store information that is not user-specific.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000534">
<IMG SRC="RegVal.gif">

<UL>
<LI>These subkeys and values store user-specific information used by Norton Navigator. The subkeys and values under HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Navigator store information that is not user-specific.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000539">
<IMG SRC="RegVal.gif">
The background section specifies the color values for elements of the Windows desktop using the rgb palette specification.
<UL>
<LI>Each element is followed by the values for red, green, and blue for the current scheme.<UL>
<LI>
ActiveBorder=
<LI>
ActiveTitle=
<LI>
AppWorkspace=
<LI>
Background=
<LI>
ButtonFace=
<LI>
ButtonHilight=
<LI>
ButtonShadow=
<LI>
ButtonText=
<LI>
GrayText=
<LI>
Hilight=
<LI>
HilightText=
<LI>
InactiveBorder=
<LI>
InactiveTitle=
<LI>
InactiveTitleText=
<LI>
Menu=
<LI>
MenuText=
<LI>
Scrollbar=
<LI>
TitleText=
<LI>
Window=
<LI>
WindowFrame=
<LI>
WindowText=</UL>
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes the color defined by the Windows Default color scheme.</UL>
<UL><LI><I>Valid range:</I> 0-255 for each color</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000540">
<IMG SRC="RegKey.gif">

<UL>
<UL><LI><I>Valid range:</I> 0-255 for each color</UL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000541">
<IMG SRC="RegKey.gif">
386Enh affects the way Windows runs in 386 Enhanced mode.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000486">
<IMG SRC="RegKey.gif">
The DefaultIcon key contains a value that specifies the image file used as the default icon for the the Briefcase.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000487">
<IMG SRC="RegKey.gif">
The StartSrv key is used by the System Monitor utility to display the starting time for gathering network performance data.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000488">
<IMG SRC="RegKey.gif">
The StartStat key contains starting values used by the System Monitor to assess network performance.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000489">
<IMG SRC="RegKey.gif">
The StatData key contains the computed usage level and performance statistics for the System Monitor.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000490">
<IMG SRC="RegKey.gif">
The StopSrv key contains data for the ending time for gathering network and server information for the Perfomance Monitor.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000491">
<IMG SRC="RegKey.gif">
The StopStat key contains data collected at the end of the allotted time for assessing system performance.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000492">
<IMG SRC="RegKey.gif">
The Enum key is the root of the hardware keys that remain in RAM. The subkeys contain system maintained data.
<UL>
<LI>The values stored include:<UL>
<LI>
Allocation-- the process that controls the hardware.
<LI>
HardwareKey--the location of the key in the HKEY_LOCAL_MACHINE\Enum tree.
<LI>
Problem--a numeric counter indicating a problem with system hardware.
<LI>
Status--Hardware error status.</UL>
</UL>
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system, and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000494">
<IMG SRC="RegKey.gif">
The Security key contains the Provider subkey which includes the server designation of the default logon server.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000495">
<IMG SRC="RegKey.gif">
The value under this key determines the icon displayed for the Control Panel
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000496">
<IMG SRC="RegKey.gif">
The value stored here determines the default icon for Dial-Up Networking.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000497">
<IMG SRC="RegKey.gif">
The value stored here determines the default icon for Printers.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000498">
<IMG SRC="RegKey.gif">
The value stored here determines the default icon for the Internet.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000508">
<IMG SRC="RegKey.gif">
The CheckBadApps key identifies applications which either require the system to be in DOS only mode or run poorly if they operate at all under Windows.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000509">
<IMG SRC="RegKey.gif">
The CheckVerDLLs key includes references to DLL files, EXE files, and other files which need an upgraded version in order to operate properly.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000510">
<IMG SRC="RegKey.gif">
The HackIniFiles key includes references to specific INI files: WIN.INI, QTW.INI, and BS94.INI
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000511">
<IMG SRC="RegKey.gif">
The Known16DLLs key includes references to 16 bit EXE, DLL, and DRV files.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000547">
<IMG SRC="RegKey.gif">
Lists the names (aliases) for the installable device drivers.
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000550">
<IMG SRC="RegKey.gif">
The keyboard section specifies the keyboard layout, type, and special features.

keyboard.dll=
oemansi.bin=
subtype=
type=
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000551">
<IMG SRC="RegKey.gif">
The mci section lists the Media Control Interface (MCI) drivers used to to play media files. The Windows Setup program automatically installs these drivers. To change them, use the Drivers icon in the Control Panel.
<UL>
<LI><I>Note:</I> Will not support entries written by applications
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000554">
<IMG SRC="RegKey.gif">
The NonWindowsApp section  affects the performance and behavior of non-Windows applications.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000562">
<IMG SRC="RegKey.gif">
The compatibility section resolves compatibility issues between Windows 3.1 and Windows 3.0, providing information to Windows 3.0 programs that relied on bugs which were fixed in Windows 3.1. You should not need to make changes to any of the settings in this section.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000563">
<IMG SRC="RegKey.gif">
Most Windows desktop settings are now in the registry: HKEY_CURRENT_USER\Control Panel\Desktop and  includes items  that affect the appearance of the desktop, including icons and wallpaper.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000564">
<IMG SRC="RegKey.gif">
The devices section provides for compatibility with Windows 2.x versions. This section is essentially the same as the [PrinterPorts] section, without the timeout values.
<UL>
<LI>Specifies information about an active printer and is provided to be compatible with Windows 2.x applications. 
<LI>
device=driver, port [, other-ports ]<UL>
<LI>
device is the name of the device.
<LI>
driver is the driver filename.
<LI>
port is the port the device is connected to or the value of NullPort= from the [windows] section.</UL>
</UL>
<UL><LI><I>Default value:</I> none</UL>
<UL>
<LI><I>Note:</I> Be sure that changing a statement here does not conflict with a corresponding entry in the [PrinterPorts] section
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000565">
<IMG SRC="RegKey.gif">
The embedding section specifies information for Object Linking and Embedding (OLE) support.
<UL>
<LI>object=description, program-file, format<UL>
<LI>
object:           Specifies the name of the server object.
<LI>
description     Gives a description of the object.
<LI>
program-file    Specifies the executable file of the application that creates the object.
<LI>
format            Specifies the files format. This is most commonly picture (Windows Metafile format).</UL>
</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000566">
<IMG SRC="RegKey.gif">
The extensions sections contains entries to  associate or link file extensions with specific applications.
<UL>
<LI>extension=command-line
<LI>
Specifies a command line to be associated with a file extension.<UL> 
<LI>
The value extension is the file extension without the preceding period.
<LI>
command-line is a command line associated with the file extension, beginning with the application filename (including the extension) and followed by any applicable command-line parameters.
<LI>
The caret (^) can be used to specify the original document filename; it is replaced by the filename without an extension.</UL>
<LI>
A typical entry might be:<UL>
<LI>
cal=calendar.exe ^.cal
<LI>
If, in this example, you launch a file called MYFILE.CAL, the Calendar applet starts and automatically loads MYFILE.CAL.</UL>
</UL>
<UL>
<LI><I>Note:</I> Associations for many of the Windows applications and applets are created automatically by the application (when it is properly installed) and the Windows Setup program. In addition, some applications may let you change default settings so that you can use particular components of that application.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000567">
<IMG SRC="RegKey.gif">
The fonts section specifies the font names and font filenames that Windows loads at startup.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000568">
<IMG SRC="RegKey.gif">
The FontSubstitutes section specifies the fonts Windows substitutes when the specified fonts are not available. This section is often used to specify replacements for Helv, Helvetica, Times, and Tms Rmn, which were replaced with other fonts in Windows 3.1.
<UL><LI><I>Default value:</I> Helv=MS Sans Serif
Helvetica=Arial
Times=Times New Roman
Tms Rmn=MS Serif</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000569">
<IMG SRC="RegKey.gif">
The intl section specifies the dates, times and numbers for international support.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000570">
<IMG SRC="RegKey.gif">
The mci extensions section associates media filename extensions with Media Control Interface (MCI) drivers.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000571">
<IMG SRC="RegKey.gif">
The network section affects how Windows handles network connnections and ports.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000572">
<IMG SRC="RegKey.gif">
The ports section defines the system serial and parallel ports.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000573">
<IMG SRC="RegKey.gif">
PrinterPorts affects printer port connections and timeout settings.
<UL>
<LI>Specifies information about an active or inactive printer.
<LI>
device=driver, port, device-timeout, retry-timeout [, other-ports ]<UL>
<LI>
device is the name of the device.
<LI>
driver is the driver filename.
<LI>
port is the port the device is connected to or the value of NullPort= from the [windows] section.
<LI>
device-timeout is the number of seconds Print Manager waits for a device to respond to Windows' requests.
<LI>
retry-timeout is the number of seconds Windows waits before retrying a transmission.</UL>
</UL>
<UL><LI><I>Default value:</I> none</UL>
<UL>
<LI><I>Note:</I> Be sure that changing a statement here does not conflict with a corresponding entry in the [devices] section (see device= for more information).
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000574">
<IMG SRC="RegKey.gif">
The programs section identifies the pathnames of  those programs Windows needs in order to run (which are not on the search path identified in the AUTOEXEC.BAT file).
<UL>
<LI>Specifies the location of a program file. This statement is used as an extension to the path specified in AUTOEXEC.BAT.
<LI>
If Windows cannot find the value, program-file, that a document is associated with, you can use this staement to assign it to another program, or the correct program. This can help avoid long DOS path statements or extend it when it is approaching its limit of 255 characters.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000575">
<IMG SRC="RegKey.gif">
The Sounds section associates system events with sound files.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000576">
<IMG SRC="RegKey.gif">
The TrueType section affects the use and display of TrueType fonts in applications.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000597">
<IMG SRC="RegKey.gif">
The AddOns section affects the File Manager program.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000599">
<IMG SRC="RegKey.gif">
The Settings section specifies options you can set by choosing File Manager menu commands.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000600">
<IMG SRC="RegKey.gif">
DOSAPP.INI file settings keep track of the state of non-Windows applications (386 Enhanced mode only). These settings are kept in the [DOS Applications] section.
<UL>
<LI>Many of the settings relate to items in the program's PIF or settings you choose from the program's Control menu. The complete format of each entry is undocumented, but it starts with these parameters:
<LI>
filename=window horz vert ... <UL>
<LI>
filename is the name of the DOS program.
<LI>
window has a value of 1 or 0, where 1 indicates that the program appears in a window and 0 indicates that it appears as a full-screen application.
<LI>
horz is the number of horizontal pixels that make up the font size.
<LI>
vert is the number of vertical pixels that make up the font size.</UL>
<LI>
Sample statements include:
<LI>
[DOS Applications]<UL>
<LI>
C:\NDOS.COM=1 8 12 648 328 22 0 2 65535 65535 65532 65532 28 22 636 366
<LI>
C:\COMMAND.COM=1 8 12 648 328 22 0 1 65535 65535 65535 65535 116 110 636 408
<LI>
C:\NC\NC.EXE=1
<LI>
C:\WIN31HLP\HCP.EXE=1</UL>
</UL>
<UL>
<LI><I>Note:</I> It is best to leave all of these settings as they are.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000601">
<IMG SRC="RegVal.gif">
Color scheme name specifies the name and characteristics of a specific color scheme. color-scheme-name identifies a color scheme (for example Black Leather Jacket, Hotdog Stand or Ocean). hexadecimal-numbers are a series of hexadecimal values that define the color scheme.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000602">
<IMG SRC="RegVal.gif">
The Documents key lists the files most recently opened by the program named by the containing Registry key. It includes a value specifying the order in which the files appear in the document history list.
<UL>
<LI>The document history is accessed from the Open, Save As, and Browse dialog boxes by clicking one of the special FileAssist icons in the upper right corner.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000603">
<IMG SRC="RegVal.gif">
The Folders key lists the folders most recently opened by the program named by the containing Registry key. It includes a value specifying the order in which the folders appear in the folder history list.
<UL>
<LI>The folder history is accessed from the Open, Save As, and Browse dialog boxes by clicking one of the special FileAssist icons in the upper right corner.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000604">
<IMG SRC="RegKey.gif">
The Hist key contains the list of folders and compressed archive files most recently accessed from Norton File Manager.
<UL>
<LI>The folder history is accessible from Norton File Manager by context-clicking (clicking the right or secondary mouse button) over a drive icon.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000605">
<IMG SRC="RegVal.gif">
PWProtected specifies whether the screen saver, indicated in the title of the section this statement appears in, should require a password to deactivate it.
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000577">
<IMG SRC="RegKey.gif">
The windows section affects various aspects of Windows appearance and behavior, including startup programs, printer control, and window appearance.
<UL>
<LI>Settings from the Windows section of win.ini are now stored in the registry. See HKEY_CURRENT_USER\Control Panel\Desktop
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000578">
<IMG SRC="RegKey.gif">
The Windows Help section affects the size and placement of help windows and the text colors associated with help functions.
<UL>
<LI>Position in pixels:<UL>
<LI>
A_WindowPosition=[left, top, width, height, maximized] 
<LI>
C_WindowPosition=[left, top, width, height, maximized]
<LI>
H_WindowPosition=[left, top, width, height, maximized]
<LI>
M_WindowPosition=[left, top, width, height, maximized]</UL>
<LI>
Color- rgb palette values:<UL>
<LI>
IFJumpColor=r g b
<LI>
IFPopupColor=r g b
<LI>
JumpColor=r g b
<LI>
MacroColor=r g b
<LI>
PopupColor=r g b </UL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000579">
<IMG SRC="RegKey.gif">
Color Schemes specifies the name of the color scheme currently in use, such as Windows Default, or Ocean.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000580">
<IMG SRC="RegKey.gif">
Current  indicates the current color scheme.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000581">
<IMG SRC="RegKey.gif">
Custom Colors defines the custom colors in the color palette.
<UL>
<LI>Specifies a color placed in the Custom Colors section of the Color dialog box in Control Panel. 
<LI>
The value letter is one of the first 16 letters of the alphabet, from A to P. (Control Panel has 16 custom colors.)  hexadecimal-number is a hexadecimal number that identifies the color. If the value is FFFFFF, the color is white, indicating that the custom color has not been defined.
<LI>
<UL>Default:
<LI>
ColorA=FFFFFF
<LI>
ColorB=FFFFFF
<LI>
ColorC=FFFFFF
<LI>
ColorD=FFFFFF
<LI>
ColorE=FFFFFF
<LI>
ColorF=FFFFFF
<LI>
ColorG=FFFFFF
<LI>
ColorH=FFFFFF
<LI>
ColorI=FFFFFF
<LI>
ColorJ=FFFFFF
<LI>
ColorK=FFFFFF
<LI>
ColorL=FFFFFF
<LI>
ColorM=FFFFFF
<LI>
ColorN=FFFFFF
<LI>
ColorO=FFFFFF
<LI>
ColorP=FFFFF</UL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000582">
<IMG SRC="RegKey.gif">
The Drivers.Desc section associates the different multimedia driver files with the names that appear in the Drivers dialog box. For example:
mciwave.drv=[MCI] Sound
midimap.drv=MIDI Mapper
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000583">
<IMG SRC="RegKey.gif">
For compatibility with Windows 3.1 applications, the Installed section indicates the current version of Microsoft Windows is 3.1 and contains information about the installed printers.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000584">
<IMG SRC="RegKey.gif">
This Multimedia Control Panel (MMCPL) section specifies values associated with the multimedia items in the Control Panel.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000585">
<IMG SRC="RegKey.gif">
Patterns specifies the color values for bitmap patterns.
The value pattern-name is the name of the desktop pattern specified in Control Panel's Desktop dialog box. The value decimal-number is a decimal number that represents the bit values for the eight rows in the editing cell.
<UL>
<LI>[Patterns]<UL>
<LI>
(None)=(None)
<LI>
Boxes=127 65 65 65 65 65 127 0
<LI>
Paisley=2 7 7 2 32 80 80 32
<LI>
Weave=136 84 34 69 136 21 34 81
<LI>
Waffle=0 0 0 0 128 128 128 240
<LI>
Tulip=0 0 84 124 124 56 146 124
<LI>
Spinner=20 12 200 121 158 19 48 40
<LI>
Scottie=64 192 200 120 120 72 0 0
<LI>
Critters=0 80 114 32 0 5 39 2
<LI>
50% Gray=170 85 170 85 170 85 170 85
<LI>
Quilt=130 68 40 17 40 68 130 1
<LI>
Diamonds=32 80 136 80 32 0 0 0
<LI>
Thatches=248 116 34 71 143 23 34 113
<LI>
Pattern=224 128 142 136 234 10 14 0
<LI>
Bricks=187 95 174 93 186 117 234 245
<LI>
Buttons=170 125 198 71 198 127 190 85
<LI>
Cargo Net=120 49 19 135 225 200 140 30
<LI>
Circuits=82 41 132 66 148 41 66 132
<LI>
Cobblestones=40 68 146 171 214 108 56 16
<LI>
Colosseum=130 1 1 1 171 85 170 85
<LI>
Daisies=30 140 216 253 191 27 49 120
<LI>
Dizzy=62 7 225 7 62 112 195 112
<LI>
Field Effect=86 89 166 154 101 149 106 169
<LI>
Key=254 2 250 138 186 162 190 128
<LI>
Live Wire=239 239 14 254 254 254 224 239
<LI>
Plaid=240 240 240 240 170 85 170 85
<LI>
Rounder=215 147 40 215 40 147 213 215
<LI>
Scales=225 42 37 146 85 152 62 247
<LI>
Stone=174 77 239 255 8 77 174 77
<LI>
Tile=69 130 1 0 1 130 69 170
<LI>
Triangles=135 7 6 4 0 247 231 199
<LI>
Waffle's Revenge=77 154 8 85 239 154 77 154</UL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000586">
<IMG SRC="RegKey.gif">
The ScreenSaver.* section specifies the settings associated with a particular Windows screen saver. Values may include settings for density, warp speed and password-protection.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000587">
<IMG SRC="RegKey.gif">
The Userinstallable.drivers section specifies the values associated with drivers installed for multimedia.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000588">
<IMG SRC="RegKey.gif">
The Netware section affects the state of Novell Netware network connections.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000595">
<IMG SRC="RegKey.gif">
The colors section specifies the color values for elements of the Windows desktop using the rgb palette specification.
<UL>
<LI>Each element is followed by the values for red, green, and blue for the current scheme.<UL>
<LI>
ActiveBorder=
<LI>
ActiveTitle=
<LI>
AppWorkspace=
<LI>
Background=
<LI>
ButtonFace=
<LI>
ButtonHilight=
<LI>
ButtonShadow=
<LI>
ButtonText=
<LI>
GrayText=
<LI>
Hilight=
<LI>
HilightText=
<LI>
InactiveBorder=
<LI>
InactiveTitle=
<LI>
InactiveTitleText=
<LI>
Menu=
<LI>
MenuText=
<LI>
Scrollbar=
<LI>
TitleText=
<LI>
Window=
<LI>
WindowFrame=
<LI>
WindowText=</UL>
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes the color defined by the Windows Default color scheme.</UL>
<UL><LI><I>Valid range:</I> 0-255 for each color</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000610">
<IMG SRC="RegKey.gif">
 Windows Program Manager  program group setup information is maintained in this section. The Settings section includes the order that groups are displayed in Program Manager.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000612">
<IMG SRC="RegKey.gif">
The FMDirTree key contains information used by Norton File Manager's directory tree.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000613">
<IMG SRC="RegVal.gif">
GridGranularity specifies the grid size Windows uses to position windows on the screen. The number can range from 0 to 49 in units of 8 pixels.
<UL>
<LI>For example:<UL>
<LI>
GridGranularity=1 indicates that the grid size is 8 pixels high by 8 pixels wide.</UL>
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-49</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000614">
<IMG SRC="RegVal.gif">
Pattern specifies 8 numeric values used to define an 8-pixel wide by 8-pixel high bitmap for the background.
<UL>
<LI>Each byte value is base 10, cannot exceed 255, and represents one row of 8 pixels. A bit that is set to 0 displays a pixel in the background color (Background=). A bit that is set to 1 displays a pixel in the foreground color (WindowText=).
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000615">
<IMG SRC="RegVal.gif">
TileWallpaper specifies whether the bitmap indicated by the Wallpaper= statement is tiled (repeated) across the screen or is centered.

A value of 1 causes the wallpaper to be tiled, 0 centers it.
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000616">
<IMG SRC="RegVal.gif">
Wallpaper specifies the bitmap file to use as the wallpaper, or screen background.
<UL><LI><I>Default value:</I> None)	(Literally, the word "None" enclosed in parentheses)</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000618">
<IMG SRC="RegVal.gif">
The Menu Types value determines which of the Norton FileAssist menu icons will be added to the Open, Save As, and Browse dialog boxes of supporting programs.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000619">
<IMG SRC="RegVal.gif">
The Startup Options value indicates whether Norton LFN Enabler has been enabled from the Norton Navigator Control Center.
<UL>
<LI>Norton LFN Enabler adds long filename capability to older Windows programs.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000620">
<IMG SRC="RegKey.gif">
The Commands key contains information that pertains to the Norton FileAssist Command menu.
<UL>
<LI>The Norton FileAssist Command menu is displayed by clicking one of the Norton FileAssist menu icons at the top right of the Open, Save As, and Browse dialog boxes of supporting programs.
<LI>
It can be customized with predefined menu items, custom menu items you design, and menu item separator bars.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000921">
<IMG SRC="RegVal.gif">
The TCPIPConnectIfUnknown value will enable you to connect via TCP/IP when directed packets have been turned off.
<UL>
<LI>This registry value will allow connection to a host when the host staus is not know due to direct packet filtering by a firewall between the remote user and the host.
</UL>
<UL>
<LI>To enable connections to a remote host when the host status is unknown 
<OL>
<LI>Create TCPIPConnectIfUnknown as a DWORD data value.
<LI>Set the value to a non-zero integer.
</OL>
</UL>
<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000621">
<IMG SRC="RegKey.gif">
The Menu key contains a list of the commands that appear on the Norton FileAssist Command menu.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000622">
<IMG SRC="RegKey.gif">
The Predefined key contains a list of the predefined menu commands that may be used to customize the Norton FileAssist Command menu.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000623">
<IMG SRC="RegVal.gif">
The Menu Separator value stores the string that will be used to represent the menu separator bar when customizing the Norton FileAssist Command menu.
<UL><LI><I>Default value:</I> "SEPARATOR"</UL>
<UL>
<LI>You can change this value to a series of equal signs, hyphens, or underscores to make it the menu command list more closely approximate how the Command menu will appear.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000624">
<IMG SRC="RegKey.gif">
The Dialogs key contains information used by Norton FileAssist to add its enhanced file management commands and long filename support to some common Windows applications.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000625">
<IMG SRC="RegKey.gif">
The Settings key stores Norton File Manager configuration information and option settings that were in effect the last time Norton File Manager was closed.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000626">
<IMG SRC="RegKey.gif">
The 1.0 key stores information used by the Norton QuickMenus program.
<UL>
<LI>Norton QuickMenus make the Windows Start Menu faster and easier to use by adding additional cascading menus to the Run, Control Panel, and Documents items.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000627">
<IMG SRC="RegKey.gif">
The Navigator Run key stores the items added to the cascading menu by Norton QuickMenus.
<UL>
<LI>Norton QuickMenus make the Windows Start Menu faster and easier to use by adding additional cascading menus to the Run, Control Panel, and Documents items.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000628">
<IMG SRC="RegKey.gif">
The Start Menu key stores the items added to the Start menu's Control Panel cascading menu by Norton QuickMenus.
<UL>
<LI>Norton QuickMenus make the Windows Start Menu faster and easier to use by adding additional cascading menus to the Run, Control Panel, and Documents items.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000629">
<IMG SRC="RegVal.gif">
iCountry specifies the country code. This code is the same as the international telephone code for the country, except for Canada, which is 2.
<UL><LI><I>Default value:</I> 1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000630">
<IMG SRC="RegVal.gif">
iCurrDigits specifies the number of digits to place after the decimal separator when displaying currencies.
<UL><LI><I>Default value:</I> 2</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000631">
<IMG SRC="RegVal.gif">
iCurrency specifies the format in which currency values are displayed.
<UL>
<LI>Examples of how one dollar could be displayed include:<PRE>
<LI>
Value       Display
<LI>
0&nbsp; &nbsp;&nbsp;&nbsp;&nbsp$1
<LI>
1&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp1$
<LI>
2 &nbsp; &nbsp;&nbsp;&nbsp$ 1
<LI>
3 &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp1</PRE>
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-3</UL>
<UL>
<LI><I>Note:</I> The currency symbol ($ in this example) is specified by the sCurrency= statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000632">
<IMG SRC="RegVal.gif">
iDate specifies numerical date format for Windows 2.x compatibility
<UL>
<LI>Examples of how  April 15, 1994, could be displayed are:<PRE>
<LI>
Value&nbsp; &nbsp;&nbsp;&nbsp;&nbspDisplay
<LI>
0&nbsp; &nbsp;&nbsp;&nbsp;&nbsp04/15/94
<LI>
1&nbsp; &nbsp;&nbsp;&nbsp;&nbsp15/04/94
<LI>
2&nbsp; &nbsp;&nbsp;&nbsp;&nbsp94/04/15 </PRE>
</UL>
<UL><LI><I>Default value:</I> 0-2</UL>
<UL>
<LI><I>Note:</I> The actual date separator (/ in this example) is specified by the sShortDate= statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000633">
<IMG SRC="RegVal.gif">
iDigits specifies the number of digits to display, after the decimal separator, in values other than currency.
<UL><LI><I>Default value:</I> 2</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000634">
<IMG SRC="RegVal.gif">
iLZero specifies whether to put leading zeros in decimal numbers.
<UL>
<LI> A value of 1 displays 0.3 and 0 displays .3.
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000635">
<IMG SRC="RegVal.gif">
iMeasure specifies the measurement system to use, where 1 specifies English and 0 uses metric.
<UL><LI><I>Default value:</I> 1</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000636">
<IMG SRC="RegVal.gif">
iNegCurr specifies the format of negative numbers for currency.
<UL>
<LI><PRE>
<LI>
Value   Display<UL>
<LI>
0&nbsp; &nbsp;&nbsp;&nbsp;&nbsp($1)
<LI>
1&nbsp; &nbsp;&nbsp;&nbsp;&nbsp-$1
<LI>
2&nbsp; &nbsp;&nbsp;&nbsp$-1
<LI>
3 &nbsp; &nbsp;&nbsp;&nbsp;&nbsp$1-
<LI>
4&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp(1$)
<LI>
5&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp-1$
<LI>
6&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp1-$
<LI>
7 &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp1$-
<LI>
8&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp -1 $
<LI>
9&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp1$ 1
<LI>
10&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp$ 1- </UL></PRE>
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-10</UL>
<UL>
<LI><I>Note:</I> The actual currency symbol is specified by the sCurrency= statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000638">
<IMG SRC="RegVal.gif">
iTime specifies whether to use a 12-hour or 24-hour clock when displaying time values, where 0 uses a 12-hour clock (which displays 2:00 P.M. as 2:00) and 1 uses a 24-hour clock (which displays 2:00 P.M. as 14:00).
<UL>
<LI>The actual time separator (a colon (:) in this example) is specified by the sTime= statement. You can specify a substitute string for A.M. or P.M. (when using a 12-hour clock) by using the s1159= or s2359= statements, respectively.
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000639">
<IMG SRC="RegVal.gif">
iTLZero specifies whether to display leading zeros with time values.
<UL>
<LI> A value of 0 does not display a leading zero (as in 9:15) and 1 displays a leading zero (as in 09:15).
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<UL>
<LI><I>Note:</I> The actual time separator (a colon (:) in this example) is specified by the sTime= statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000641">
<IMG SRC="RegVal.gif">
s1159 specifies the string that follows times before noon when using the 12-hour time format.
<UL>
<LI>Notice that 1159 (as in s1159) indicates one minute before noon (AM, by default). You can specify a substitute string for PM with the s2359= statement.
</UL>
<UL><LI><I>Default value:</I> AM</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000642">
<IMG SRC="RegVal.gif">
s2359 specifies the string that follows times after noon when using the 12-hour time format.
<UL>
<LI>Notice that 2359 (as in s2359) indicates one minute before midnight (PM, by default). You can specify a substitues string for AM with the s1159= statement.
</UL>
<UL><LI><I>Default value:</I> PM</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000643">
<IMG SRC="RegVal.gif">
sCountry specifies the name of the country used to determine the standard value you use.
<UL><LI><I>Default value:</I> United States</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000644">
<IMG SRC="RegVal.gif">
sCurrency specifies the symbol for the currency you use.
<UL><LI><I>Default value:</I> $</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000645">
<IMG SRC="RegVal.gif">
sDecimal specifies the separator used between the whole number and the fractional portion of a decimal number.
<UL><LI><I>Default value:</I> . (period)</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000646">
<IMG SRC="RegVal.gif">
sLanguage specifies the language you want to use.
<UL>
<LI><PRE>
<LI>
Value&nbsp; &nbsp;&nbsp;&nbsp Language
<LI>
dan&nbsp; &nbsp;&nbsp;&nbsp;&nbsp Danish
<LI>
deu&nbsp; &nbsp;&nbsp;&nbsp;&nbsp German
<LI>
eng&nbsp; &nbsp;&nbsp;&nbsp;&nbsp International English
<LI>
enu&nbsp; &nbsp;&nbsp;&nbsp;&nbsp U.S. English
<LI>
esn&nbsp; &nbsp;&nbsp;&nbsp;&nbsp  Modern Spanish
<LI>
esp&nbsp; &nbsp;&nbsp;&nbsp;&nbsp  Castilian Spanish
<LI>
fin&nbsp; &nbsp;&nbsp;&nbsp;&nbsp    Finnish
<LI>
fra&nbsp; &nbsp;&nbsp;&nbsp;&nbsp    French
<LI>
frc&nbsp; &nbsp;&nbsp;&nbsp;&nbsp    French Canadian
<LI>
isl&nbsp; &nbsp;&nbsp;&nbsp;&nbsp     Icelandic
<LI>
ita&nbsp; &nbsp;&nbsp;&nbsp;&nbsp    Italian
<LI>
nld&nbsp; &nbsp;&nbsp;&nbsp;&nbsp   Dutch
<LI>
nor&nbsp; &nbsp;&nbsp;&nbsp;&nbsp   Norwegian
<LI>
ptg&nbsp; &nbsp;&nbsp;&nbsp;&nbsp   Portuguese
<LI>
sve&nbsp; &nbsp;&nbsp;&nbsp;&nbsp   Swedish </PRE>
</UL>
<UL><LI><I>Default value:</I> enu</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000647">
<IMG SRC="RegVal.gif">
sList specifies the character used to separate items in a list.
<UL><LI><I>Default value:</I> , (comma)</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000648">
<IMG SRC="RegVal.gif">
sLongDate specifies the long format used to display the date. It includes abbreviations and separators.
<UL>
<LI>You can indicate the format using a combination of the strings listed below and separators (such as a comma):
<LI>
Value&nbsp; &nbsp;&nbsp;&nbsp;&nbsp Language
<LI>
d&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp Day (1-31)
<LI>
dd&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp Day (01-31)
<LI>
ddd&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp Day (Mon-Sun)
<LI>
dddd&nbsp; &nbsp;&nbsp;&nbsp;&nbspDay (Monday-Sunday)
<LI>
M&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp               Month (1-12)
<LI>
MM&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbspMonth (01-12)
<LI>
MMM&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp Month (Jan-Dec)
<LI>
MMMM&nbsp; &nbsp;&nbsp;&nbsp;&nbspMonth (January-December)
<LI>
yy&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbspYear (00-99)
<LI>
yyyy&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbspYear (1900-2040)
<LI>
ddd, MMMM dd, yyyy displays as Friday, January 1, 1980.
</UL>
<UL><LI><I>Default value:</I> ddd, MMMM dd, yyyy</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000649">
<IMG SRC="RegVal.gif">
sShortDate specifies the short format used to display the date. It includes abbreviations and separators.
<UL>
<LI>You can indicate the format using a combination of the strings listed below along with separators (such as a comma or slash):<PRE>
<LI>
Value&nbsp;&nbsp;&nbsp;&nbsp;&nbspDate Format
<LI>
d&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbspDay (1-31)
<LI>
dd&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbspDay (01-31)
<LI>
ddd&nbsp; &nbsp;&nbsp;&nbsp;&nbspDay (Mon-Sun)
<LI>
dddd&nbsp; &nbsp;&nbsp;&nbsp;&nbspDay (Monday-Sunday)
<LI>
M&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbspMonth (1-12)
<LI>
MM&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbspMonth (01-12)
<LI>
MMM&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbspMonth (Jan-Dec)
<LI>
MMMM&nbsp; &nbsp;&nbsp;&nbsp;&nbspMonth (January-December)
<LI>
yy&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbspYear (00-99)
<LI>
yyyy&nbsp; &nbsp;&nbsp;&nbsp;&nbspYear (1900-2040)</PRE>
</UL>
<UL><LI><I>Default value:</I> M/d/yy</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000650">
<IMG SRC="RegVal.gif">
sThousand specifies the character used to separate powers of one-thousand.
<UL>
<LI>For example, if a comma (,) is used, 3000 appears as 3,000 and 3000000 as 3,000,000.
</UL>
<UL><LI><I>Default value:</I> , (comma)</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000651">
<IMG SRC="RegVal.gif">
sTime specifies the character used to separate hours, minutes, and seconds in time values.
<UL><LI><I>Default value:</I> : (colon)</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000652">
<IMG SRC="RegVal.gif">
COMport-number contains the communication or serial port settings for the individual COM ports.
COMport-number=port-number, baud-rate, parity, word-length, stop-bits [, handshaking]
<UL>
<LI>Specifies communication information for the communications port identified as follows:
<LI>
port-number is the communications port number (1 through 4). <UL>
<LI>
baud-rate is the port's baud rate.
<LI>
parity is the parity setting.
<LI>
word-length is the length of a word in bits.
<LI>
stop-bits is the number of stops bits for the port.
<LI>
handshaking is optional and specifies if hardware handshaking is in effect.</UL>
</UL>
<UL><LI><I>Default value:</I> 9600, n, 8, 1, x</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000653">
<IMG SRC="RegVal.gif">
EPT: specifies an IBM specific printer. Windows sends output to this device as if it were a file.
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000654">
<IMG SRC="RegVal.gif">
When the FILE: option is selected as the current port for printing, Windows prints information to a file. If a value is specified for FILE:=, Windows prompts you for an output file each time you print.
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000655">
<IMG SRC="RegVal.gif">
When the filename option is selected as the current port for printing, Windows prints information to the file specified by filename.
<UL><LI><I>Default value:</I> This statement does not appear by default.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000656">
<IMG SRC="RegVal.gif">
LPTport-number: specifies a parallel printer port.
<UL>
<LI>This statement does not take any parameters.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000657">
<IMG SRC="RegVal.gif">
LPTport-number.DOS specifies a path to a network printer so you can continue to use direct printing to a port.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000658">
<IMG SRC="RegVal.gif">
OutlineThreshold specifies the number of pels-per-em that Windows switches from outline TrueType fonts to bitmap TrueType fonts.
<UL>
<LI>Bitmap fonts are faster but require more memory. If your system is low on memory, decrease this value.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 256.</UL>
<UL>
<LI><I>Note:</I> Do not assign a value greater than 300 to this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000659">
<IMG SRC="RegVal.gif">
TTEnable specifies whether TrueType fonts are available.
<UL>
<LI>A value of 1 enables TrueType fonts for use in your Windows applications, 0 disables them.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 1.</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000660">
<IMG SRC="RegVal.gif">
TTOnly specifies whether TrueType fonts are the only fonts available on your system for Windows applications.
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000661">
<IMG SRC="RegVal.gif">
TTIfCollisions specifies whether to use TrueType fonts in place of another font if both have the same font name.
<UL>
<LI>For example, Windows provides both a bitmap and TrueType version of the Symbol font. If this statement is set to 0, Windows uses the TrueType version.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 0.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000662">
<IMG SRC="RegVal.gif">
Beep specifies whether Windows makes a beeping sound when there is an user error.
<UL><LI><I>Default value:</I> Yes</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000663">
<IMG SRC="RegVal.gif">
BorderWidth specifies the width of the borders that appear around all windows with sizable borders. This value can range from the narrowest width of 1 to the widest width of 49.
<UL><LI><I>Default value:</I> 3</UL>
<UL><LI><I>Valid range:</I> 1-49</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000664">
<IMG SRC="RegVal.gif">
CoolSwitch specifies whether Windows performs fast task switching (or fast "Alt+Tab" switching).
<UL>
<LI>When set to 1, Windows displays the icon and application name that will be switched to when the Alt key is released. If set to 1, Windows switches to each application as you press and release Tab while holding Alt.
</UL>
<UL><LI><I>Default value:</I> none (1 is assumed)</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000665">
<IMG SRC="RegVal.gif">
CursorBlinkRate specifies how much time elapses between each blink of the selection cursor.
<UL>
<LI>CursorBlinkRate=milliseconds
</UL>
<UL><LI><I>Default value:</I> 530</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000666">
<IMG SRC="RegVal.gif">
Device specifies the default printer.
<UL>
<LI>Device=output-device-name, device-driver, port-connection<UL>
<LI>
The output-device-name is the name of a device listed in the [devices] section
<LI>
The device must have an explicit port and driver assigned to it
<LI>
The device-driver is the filename of the device driver file 
<LI>
Port-connection is a port from the [ports] section</UL>
</UL>
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000667">
<IMG SRC="RegVal.gif">
Documents specifies the files that Windows considers "documents". This statement is used for document file extensions not listed in the [extensions] section, since files listed there are automatically considered documents.
<UL>
<LI>The extensions listed here are not associated with any application. Each extension listed should be separated by a space and should not include the preceding period.
</UL>
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000668">
<IMG SRC="RegVal.gif">
DoubleClickSpeed specifies the maximum time allowed (milliseconds)  between clicks in a double-click.
<UL><LI><I>Default value:</I> 452</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000669">
<IMG SRC="RegVal.gif">
KeyboardDelay specifies how long to wait after you hold down a key before repeating the key.
<UL>
<LI>KeyboardDelay=milliseconds
</UL>
<UL><LI><I>Default value:</I> 31</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000670">
<IMG SRC="RegVal.gif">
KeyboardSpeed specifies how long to wait between repetitions of a character on the display when you hold down a key.
<UL>
<LI>KeyboardSpeed=milliseconds
</UL>
<UL><LI><I>Default value:</I> 31</UL>
<UL>
<LI><I>Note:</I> This statement does not work for all keyboards.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000671">
<IMG SRC="RegVal.gif">
Load specifies one or more files that Windows loads at startup as minimized icons.
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000672">
<IMG SRC="RegVal.gif">
NetWarn specifies whether Windows displays a warning message if your system is configured for a network and the network is not running or the wrong network is running.
<UL>
<LI>All Windows network-related options are disabled if the network is not running or is not correct.  A value of 1 enables the network warning message and 0 disables it.
</UL>
<UL><LI><I>Default value:</I> 1</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000673">
<IMG SRC="RegVal.gif">
NullPort specifies the name displayed when the null port is selected. The null port is used when a new device is installed but is not connected to any port. This value also appears in the [devices] section of WIN.INI for devices installed to a null port.
<UL><LI><I>Default value:</I> "None"</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000674">
<IMG SRC="RegVal.gif">
Programs specifies which files (according to the files' extensions) are regarded as applications. Each filename extension must be separated with a space. Do not include the period that precedes the file extension (for example: EXE, not .EXE).
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000675">
<IMG SRC="RegVal.gif">
Run specifies one or more applications to run when Windows is started.
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000676">
<IMG SRC="RegVal.gif">
ScreenSaveActive specifies whether Windows uses a screen saver, where 1 activates a screen saver.
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000677">
<IMG SRC="RegVal.gif">
ScreenSaveTimeOut specifies the idle time that must elapse before the screen saver appears.
<UL><LI><I>Default value:</I> 120</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000679">
<IMG SRC="RegVal.gif">
SwapMouseButtons specifies whether to swap the left and right mouse buttons, where 1 swaps the mouse buttons.
<UL><LI><I>Default value:</I> This statement does not appear by default; Windows assumes a value of 0.</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000680">
<IMG SRC="RegVal.gif">
DoubleClickHeight specifies twice the vertical distance (in pixels) that the mouse can move between clicks in a double-click.
<UL>
<LI>Anything outside this distance is treated as two single clicks. For example, a value of 8 allows the mouse to move 4 pixels up or down between clicks and still be recognized as a double-click. If you enter an odd number, it is rounded to the nearest even number.
</UL>
<UL><LI><I>Default value:</I> This statement does not exist by default; Windows assumes a value of 4.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000681">
<IMG SRC="RegVal.gif">
DoubleClickWidth specifies twice the horizontal distance (in pixels) that the mouse can move between clicks in a double-click.
<UL>
<LI>Anything outside this distance is treated as two single clicks. For example, a value of 8 allows the mouse to move 4 pixels left or right between clicks and still be recognized as a double-click. If you enter an odd number, it is rounded to the nearest even number.
</UL>
<UL><LI><I>Default value:</I> This statement does not exist by default; Windows assumes a value of 4.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000682">
<IMG SRC="RegVal.gif">
DosPrint specifies whether Windows should use DOS interrupt (INT 21h) services to print, where Yes uses DOS interrupts.
<UL>
<LI>If set to No Windows attempts to print directly to the parallel printer port. If you are using a non-standard parallel port or network printer port, this option should be set to Yes.
</UL>
<UL><LI><I>Default value:</I> no</UL>
<UL><LI><I>Valid range:</I> yes/no</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000683">
<IMG SRC="RegVal.gif">
DefaultQueueSize specifies the number of messages that an application's message queue can hold.
<UL>
<LI>DefaultQueueSize=number
</UL>
<UL><LI><I>Default value:</I> 8</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000684">
<IMG SRC="RegVal.gif">
DeviceNotSelectedTimeout specifies how long Windows waits for a device to respond to requests from Windows. This is a system default value.
<UL>
<LI>To change the value for a particular printer, you must choose the device= statement in the [printerPorts] section that corresponds to that printer.
<LI>
If a device does not respond to requests from Windows within the specified time, Windows does not print to the device.
</UL>
<UL><LI><I>Default value:</I> 15</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000685">
<IMG SRC="RegVal.gif">
MouseSpeed specifies how Windows handles the cursor speed in relation to the mouse speed, whenever the value of either MouseThreshold1= or MouseThreshold2= is exceeded.
<UL>
<LI>Here is how the cursor moves in relation to the mouse based on the value of MouseSpeed:<PRE>
<LI>
Value&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp               Result
<LI>
0&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbspThe cursor moves at the same rate as the mouse at all times (no acceleration).
<LI>
1&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbspThe cursor moves twice the speed of the mouse after exceeding MouseThreshold1=.
<LI>
2 &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbspThe cursor moves twice the speed of the mouse after exceeding MouseThreshold1= and four times the speed of the mouse after exceeding MouseThreshold2=.</PRE>
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default; Windows assumes a value of 1.</UL>
<UL><LI><I>Valid range:</I> 0-2</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000686">
<IMG SRC="RegVal.gif">
MouseThreshold1 specifies a threshold value (in pixels), used in conjunction with the MouseSpeed= and MouseThreshold2= statements, to determine cursor speed.
<UL>
<LI>The threshold value assigned to this statement is compared to the number of pixels the mouse has moved between mouse interrupts. If the mouse movement exceeds the value defined by MouseThreshold1= and if MouseSpeed= is greater than 0, the cursor moves twice the speed of the mouse.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default; Windows assumes a value of 5.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000687">
<IMG SRC="RegVal.gif">
MouseThreshold2 specifies a threshold value (in pixels), used in conjunction with the MouseSpeed= and MouseThreshold1= statements, to determine cursor speed.
<UL>
<LI>The threshold value assigned to this statement is compared to the number of pixels the mouse has moved between mouse interrupts.
<LI>
 If the mouse movement exceeds the value defined by MouseThreshold=2 and if MouseSpeed=2, the cursor moves four times the speed of the mouse.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default; Windows assumes a value of 10.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000688">
<IMG SRC="RegVal.gif">
MouseTrails specifies the number of mouse pointers to place in a trail of pointers when the Mouse Trails check box is checked in Control Panel's Mouse dialog box. The trail created follows the movement of your actual cursor on the display.
<UL>
<LI>This statement is useful when you have a hard time tracking mouse movements on the display (such as liquid crystal displays (LCD)). However, this only works with EGA, VGA, or SuperVGA display drivers.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 1.</UL>
<UL><LI><I>Valid range:</I> 1-7</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000678">
<IMG SRC="RegKey.gif">
The ViewTabs key contains configuration information for the Norton File Manager SmartTabs.
<UL>
<LI>SmartTabs are named, customizable file viewing schemes available in Norton File Manager. You can quickly switch between predefined and customized file viewing schemes by clicking the different SmartTabs in Norton File Manager.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000689">
<IMG SRC="RegVal.gif">
Spooler specifies whether Print Manager is used when output is sent to the printer, where Yes activates Print Manager.
<UL>
<LI>If you are printing to a network printer or a printer with a large internal buffer you may want to set this statement to No. This increases your performance.
</UL>
<UL><LI><I>Default value:</I> yes</UL>
<UL><LI><I>Valid range:</I> yes/no</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000690">
<IMG SRC="RegVal.gif">
SystemFont specifies the font used in menus and title bars. The value filename.fon specifies a font file with the extension .FON. TrueType fonts (.TTF or .FOT) cannot be used.
<UL><LI><I>Default value:</I> This statement does not appear by default.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000691">
<IMG SRC="RegVal.gif">
TransmissionRetryTimeout specifies the default time Windows waits before declaring a transmission failure.
<UL>
<LI>If the timeout period is reached, Print Manager displays a message.
<LI>
A default value is saved for each printer in the [printerPorts] section. To change the value for a particular printer, you must change the corresponding value in [printerPorts].
</UL>
<UL><LI><I>Default value:</I> 90 for PostScript printers; 45 for all others</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000692">
<IMG SRC="RegKey.gif">
The ViewTabsList key lists the different SmartTabs available in Norton File Manager.
<UL>
<LI>SmartTabs are named, customizable file viewing schemes available in Norton File Manager. You can quickly switch between predefined and customized file viewing schemes by clicking the different SmartTabs in Norton File Manager.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000693">
<IMG SRC="RegVal.gif">
32BitDiskAccess specifies whether Windows uses the Block I/O subsystem which replaces FastDisk, which interfaces directly with the hard disk controller and intercepts all system requests to the ROM BIOS, including disk requests.
<UL>
<LI>32 bit disk access will enhance disk I/O performance and let you run more DOS applications simultaneously in Enhanced mode. When you install Windows, it checks to see whether your hardware supports 32-bit disk access.
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000694">
<IMG SRC="RegKey.gif">
The Version1 key stores configuration information gathered when Version 1 of Norton Navigator was installed on the system.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000695">
<IMG SRC="RegVal.gif">
The Original Desktop value stores the location of the users original desktop at the time Norton Navigator was installed.
<UL>
<LI>Norton Taskbar allows users to define multiple desktop layouts and quickly switch between them. By the default Windows Desktop is stored in the Windows/Desktop folder. The Norton Navigator Desktop and any user-defined desktops are stored in individual folders within the Norton Navigator folder.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000696">
<IMG SRC="RegKey.gif">
This key stores configuration information for a Norton Navigator desktop.
<UL>
<LI>Norton Navigator's Norton Taskbar allows you to define multiple, customized desktops, and quickly switch between them. This key stores the configuration information for one of those desktops.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000697">
<IMG SRC="RegVal.gif">
A20EnableCount specifies the A20 enable count that, in turn, indicates the A20 handler HIMEM.SYS uses to access extended memory.
<UL><LI><I>Default value:</I> Determined by WIN386.EXE.</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000698">
<IMG SRC="RegVal.gif">
AllEMSLocked specifies whether Windows allows the contents of expanded memory used by Windows and non-Windows applications to be locked into memory, disabling swapping to disk.
<UL>
<LI>When this statement is set to On, all contents of expanded memory are locked and PIF settings for EMS Memory Locked are overriden. This is typically used for disk cache programs that use expanded memory. 
<LI>
When this statement is set to Off, Windows enables swapping to disk.
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000699">
<IMG SRC="RegVal.gif">
AllVMsExclusive specifies whether non-Windows applications are forced to run full screen. When On, this entry forces all non-Windows applications to run full screen, overriding their PIF settings.
<UL>
<LI>You should set AllVMsExclusive=On when you encounter problems running memory-resident or network software that is not Windows compatible.
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000700">
<IMG SRC="RegVal.gif">
AllXMSLocked specifies whether Windows allows the contents of extended memory used by Windows and non-Windows applications to be locked into memory, disabling swapping to disk.
<UL>
<LI>When this statement is set to On, all contents of extended memory are locked and PIF settings for XMS Memory Locked are overriden. When this statement is set to Off, Windows enables swapping to disk.
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000701">
<IMG SRC="RegVal.gif">
AltKeyDelay specifies the amount of time in seconds that  Windows waits to process a keyboard interrupt after processing an Alt interrupt. You can increase this value if any of your applications do not handle the Alt key correctly.
<UL><LI><I>Default value:</I> .005</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000702">
<IMG SRC="RegVal.gif">
AltPasteDelay specifies how long Windows waits to paste characters after the Alt key has been pressed. You may need to give some applications more time to recognize the Alt keystroke.
<UL><LI><I>Default value:</I> .025</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000703">
<IMG SRC="RegVal.gif">
AutoRestoreScreen specifies whether Windows restores the screen when returning to a non-Windows application.
<UL>
<LI>When set to On, Windows restores the screen. When set to Off, this statement tells Windows to let the non-Windows application restore its own screen, which saves memory. However, this only applies to VGA displays, and to applications that tell Windows they can restore their own screens. 
<LI>
Normally, this statement should be On to let Windows restore the screen.
</UL>
<UL><LI><I>Default value:</I> On</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000866">
<IMG SRC="RegKey.gif">
This key contains configuration information for the associated SmartFolder.
<UL>
<LI>Norton SmartFolders are a component of Norton Navigator that allow you to create folders that dynamically fill themselves with shortcuts to files you specify. You simply specify the types of files that a SmartFolder should contain, and the folder can be automatically updated periodically whenever a new file of the specified type is added to the system.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000867">
<IMG SRC="RegKey.gif">
The Undo key contains configuration information for Norton Undo.
<UL>
<LI>Norton Undo lets you reverse file and folder operations.
<LI>
You can always use Undo from the Norton File Manager Edit menu to undo operations you performed in File Manager.
<LI>
If you select Track All Windows 95 File Operations from the Norton Navigator Control Center, you can also reverse file and folder operations that you performed in Explorer or from the desktop.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000868">
<IMG SRC="RegKey.gif">
The Run key contains a list of the items that appear in the Run history list after Norton Navigator is installed.
<UL>
<LI>The Run history list appears on the Run dialog box, which may be invoked from the Windows Start menu or the Norton File Manager's File menu.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000869">
<IMG SRC="RegKey.gif">
The History_Lists key contains information used by various Norton Navigator history lists.
<UL>
<LI>History lists generally appear as drop-down lists on data entry fields of dialog boxes. When you click the down-arrow to the right of the field, a list of the most recently entered data drops down.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000870">
<IMG SRC="RegKey.gif">
The SearchContains key lists the history of the Norton File Manager FastFind "Containing" field.
<UL>
<LI>The "Containing" field of the Norton File Manager FastFind dialog box specifies the text to search for.
<LI>
The history list displays recent text search specifications.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000871">
<IMG SRC="RegKey.gif">
The SearchFileSpec key  lists the history of the Norton File Manager FastFind "What" field.
<UL>
<LI>The "What" field of the Norton File Manager FastFind dialog box specifies the files or folders to search for.
<LI>
The history list displays recent file and folder search specifications, which may include wildcards.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000872">
<IMG SRC="RegKey.gif">
The SearchWhere key lists the history of the Norton File Manager FastFind "Where" field.
<UL>
<LI>The "Where" field of the Norton File Manager FastFind dialog box specifies where to search.
<LI>
The history list displays recently searched locations.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000873">
<IMG SRC="RegKey.gif">
The Sets key contains information about user-defined file sets and location sets.
<UL>
<LI>File sets and location sets are a feature of Norton File Manager that allows users to group specified collections of files or folders under a single name. File sets and location�sets can make selecting and operating on groups of files in specific locations easier.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000874">
<IMG SRC="RegKey.gif">
The FileType key lists user-defined file sets and specifies their characteristics.
<UL>
<LI>File sets and location sets are a feature of Norton File Manager that allows users to group specified collections of files or folders under a single name. File sets and location�sets can make selecting and operating on groups of files in specific locations easier.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000875">
<IMG SRC="RegKey.gif">
The Location key lists user-defined location sets and specifies their characteristics.
<UL>
<LI>File sets and location sets are a feature of Norton File Manager that allows users to group specified collections of files or folders under a single name. File sets and location�sets can make selecting and operating on groups of files in specific locations easier.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000876">
<IMG SRC="RegKey.gif">
The SmartFolders key contains information used by Norton SmartFolders.
<UL>
<LI>Norton SmartFolders is a component of Norton Navigator.
<LI>
The information stored under this key pertains to the history lists displayed by the Norton SmartFolders wizard and the Norton SmartFolders Properties dialog box.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000877">
<IMG SRC="RegKey.gif">
The DirList key contains the File Locations history that is displayed as a drop-down list in the Norton SmartFolders wizard and Properties dialog box.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000878">
<IMG SRC="RegKey.gif">
The FoldList key contains the Folder Location history that is displayed as a drop-down list in the Norton SmartFolders wizard and Properties dialog box.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000879">
<IMG SRC="RegKey.gif">
The TypeList key contains the File Types history that is displayed as a drop-down list in the Norton SmartFolders wizard and Properties dialog box.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000880">
<IMG SRC="RegKey.gif">
The SYMFDLG4 key contains information used by the file dialogs module of Norton Navigator.
<UL>
<LI>The file dialogs module provides the dialog boxes use for file operations like Delete, Open, Rename, and Save As.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000881">
<IMG SRC="RegKey.gif">
The SYMFSV4 key contains information used by the file services module of Norton Navigator.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000882">
<IMG SRC="RegKey.gif">
The FTP key stores information about the FTP sites available in Norton File Manager.
<UL>
<LI>Norton File Manager is part of Norton Navigator.
<LI>
Norton File Manager lets you connect to FTP sites easily by simply double-clicking on the site name. It comes with a list of common FTP sites, and you can add new sites to the list. While you are connected to an FTP site, its directory and file lists appear in Norton File Manager. You can drag file names from the FTP site file list to copy or move them to your local or network drives or to another connected FTP site.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000883">
<IMG SRC="RegKey.gif">
This key stores information used by Norton File Manager to connect to the corresponding FTP site.
<UL>
<LI>Norton File Manager is part of Norton Navigator.
<LI>
Norton File Manager lets you connect to FTP sites easily by simply double-clicking on the site name. It comes with a list of common FTP sites, and you can add new sites to the list. While you are connected to an FTP site, its directory and file lists appear in Norton File Manager. You can drag file names from the FTP site file list to copy or move them to your local or network drives or to another connected FTP site.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000884">
<IMG SRC="RegKey.gif">
The FTP Types key stores information about common FTP host types, and is used in conjunction with the FTP key to help Norton File Manager connect to FTP sites.
<UL>
<LI>Norton File Manager is part of Norton Navigator.
<LI>
Norton File Manager lets you connect to FTP sites easily by simply double-clicking on the site name. It comes with a list of common FTP sites, and you can add new sites to the list. While you are connected to an FTP site, its directory and file lists appear in Norton File Manager. You can drag file names from the FTP site file list to copy or move them to your local or network drives or to another connected FTP site.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000239">
<IMG SRC="RegKey.gif">
The pcANYWHERE key is the root key for this application's settings.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000240">
<IMG SRC="RegKey.gif">
This is the version identification key for this application.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000241">
<IMG SRC="RegKey.gif">
The ASCII Protocol key contains configuration settings for a  pcANYWHERE ASCII transfer session.
<UL>
<LI><I>Note:</I> Norton pcANYWHERE is completely configurable from within the user interface. Under most conditions, you do not need to change the Norton pcANYWHERE Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000242">
<IMG SRC="RegKey.gif">
The Button Bars key contains settings reflecting the current choices and options available on the pcANYWHERE button bar.
<UL>
<LI><I>Note:</I> Norton pcANYWHERE is completely configurable from within the user interface. Under most conditions, you do not need to change the Norton pcANYWHERE Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000243">
<IMG SRC="RegKey.gif">
The File Transfer key contains configuration settings for a pcANYWHERE  file transfer session.
<UL>
<LI><I>Note:</I> Norton pcANYWHERE is completely configurable from within the user interface. Under most conditions, you do not need to change the Norton pcANYWHERE Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000244">
<IMG SRC="RegKey.gif">
The host key contains the settings specifying the type of connection used by a remote PC when pcANYWHERE is in host mode.
<UL>
<LI><I>Note:</I> Norton pcANYWHERE is completely configurable from within the user interface. Under most conditions, you do not need to change the Norton pcANYWHERE Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000245">
<IMG SRC="RegKey.gif">
The Online Service key contains configuration settings for connecting to an online infomation service.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000246">
<IMG SRC="RegKey.gif">
The Remote Control key contains configuration settings for remote computing.
<UL>
<LI><I>Note:</I> Norton pcANYWHERE is completely configurable from within the user interface. Under most conditions, you do not need to change the Norton pcANYWHERE Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000247">
<IMG SRC="RegKey.gif">
The System key contains configuration settings and paths for user scripts and downloads for this intallation of pcANYWHERE.
<UL>
<LI><I>Note:</I> Norton pcANYWHERE is completely configurable from within the user interface. Under most conditions, you do not need to change the Norton pcANYWHERE Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000250">
<IMG SRC="RegKey.gif">
The Zmodem Protocol key contains configuration data for zmodem file tranfers.
<UL>
<LI><I>Note:</I> Norton pcANYWHERE is completely configurable from within the user interface. Under most conditions, you do not need to change the Norton pcANYWHERE Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000251">
<IMG SRC="RegKey.gif">
The Symantec key is the root key for user configuration preference settings for Symantec 32 bit applications.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000252">
<IMG SRC="RegKey.gif">
Placeholder
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000253">
<IMG SRC="RegKey.gif">
The Control Center key lists Norton Navigator programs which, if their features are enabled from the Norton Control Center, should be started automatically when Windows is started.
<UL>
<LI>If the program's associated value is set to 1, it will be started automatically. If the value is 0, the program will not be started automatically.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000254">
<IMG SRC="RegKey.gif">
The FastFind key holds information used by Norton FastFind.
<UL>
<LI>Norton Fast Find:<UL>
<LI>
is a component of Norton File Manager
<LI>
supports file and location sets (user-defined subsets of files and folders) which can be used to narrow the search area
<LI>
lets you save search criteria as defined searches for later reuse
<LI>
works together with Norton Indexing to dramatically speed up searching for specific text within files</UL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000255">
<IMG SRC="RegKey.gif">
The FileAssist key contains subkeys and values relating to Norton Navigator's FileAssist program.
<UL>
<LI>Norton FileAssist adds file management commands to the Open, Save As, and Browse dialog boxes of other programs.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000256">
<IMG SRC="RegKey.gif">
The FILEMGR key contains subkeys and values pertaining to Norton File Manager.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000257">
<IMG SRC="RegKey.gif">
The Indexing key stores configuration information for Norton Indexing.
<UL>
<LI>Norton Indexing indexes selected files to greatly speed text searches by Norton FastFind. You can create several different indexes for different purposes.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000258">
<IMG SRC="RegKey.gif">
The Install key stores information gathered when Norton Navigator was first installed.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000259">
<IMG SRC="RegKey.gif">
The Menu Companions key stores information used by the Norton QuickMenus program.
<UL>
<LI>Norton QuickMenus make the Windows Start Menu faster and easier to use by adding additional cascading menus to the Run, Control Panel, and Documents items.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000260">
<IMG SRC="RegKey.gif">
The NN-SplashScreen key holds values relating to the Norton Navigator splash (startup) screen.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000261">
<IMG SRC="RegKey.gif">
The Norton Taskbar key stores configuration information used by Norton Taskbar.
<UL>
<LI>This information includes the location of the Norton Navigator Desktop folder and any user-defined desktop folders.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000262">
<IMG SRC="RegKey.gif">
The Run key stores the names and paths to Norton Navigator component programs that will be run automatically when Windows is started.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000263">
<IMG SRC="RegKey.gif">
The SYMFDLG4 key contains user-specific information used by the file dialogs module of Norton Navigator.
<UL>
<LI>The file dialogs module provides the dialog boxes use for file operations like Delete, Open, Rename, and Save As.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000264">
<IMG SRC="RegKey.gif">
The SYMFSV4 key contains user-specific information used by the file services module of Norton Navigator.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000265">
<IMG SRC="RegKey.gif">
The Welcome key contains configuration information pertaining to the Norton Navigator Welcome screen.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000266">
<IMG SRC="RegKey.gif">
The Norton Utilities key contains subkeys and values that store user-specific configuration information for Norton Utilities.
<UL>
<LI>Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000267">
<IMG SRC="RegKey.gif">
The pcANYWHERE key is the root key for settings and configuration options specified by the current user.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000268">
<IMG SRC="RegKey.gif">
The Norton Disk Doctor key contains user-specific configuration settings for Norton Disk Doctor.
<UL>
<LI>Norton Disk Doctor diagnoses and repairs existing or potential problems with any disk. It performs a variety of tests, checking everything from the disk's partition table to its physical surface.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000269">
<IMG SRC="RegKey.gif">
The Norton Speed Disk key contains user-specific configuration settings for Speed Disk.
<UL>
<LI>Speed Disk optimizes disk access and improves your computer's performance. It rearranges the files on a disk, including the Windows swap file, for maximum efficiency.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you should not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000270">
<IMG SRC="RegKey.gif">
The Norton UnErase key contains user-specific configuration information for Norton UnErase Wizard.
<UL>
<LI>UnErase Wizard steps you through the process of recovering deleted files. If the files are protected by Norton Protection or if they are still in the Recycle Bin, the recovery will be 100 percent successful.
<LI>
UnErase Wizard can frequently recover unprotected files as well, even those deleted from the Recycle Bin. If a file is recoverable but cannot be recovered automatically, UnErase Wizard can help you reconstruct it.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you should not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000271">
<IMG SRC="RegKey.gif">
The Space Wizard key contains user-specific configuration information for Norton Space Wizard.
<UL>
<LI>Space Wizard helps you reclaim disk space by identifying files that are candidates for deleting, moving, or compressing.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you should not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000272">
<IMG SRC="RegKey.gif">
The System Information key contains user-specific configuration information for Norton System Information.
<UL>
<LI>System Information gives you quick, one-stop access to basic or detailed information about your computer.
<LI>
Subkeys under this key contain custom report settings controlling whether Sytem Information reports include detailed information or summary data only.
</UL>
<UL>
<LI>To store custom report profiles for system information for later use
<OL>
<LI>Select  your report options through the System Information custom reports checkboxes.
<LI>Run Norton Registry Editor.
<LI>Navigate the Registry  tree to select HKEY_CURRENT_USER\Software\Symantec\Norton Utilities\System Information.
<LI>From the Registry Editor File menu, select Export Registry File
<LI>Select a folder and save the file as a .REG file.
</OL>
<LI>To retrieve a custom report profile
<OL>
<LI>Run Norton Registry Editor.
<LI>Select Import Registry File from the File menu
<LI>Select your .REG file and your stored report settings will be restored.
</OL>
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you should not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000278">
<IMG SRC="RegKey.gif">
The PingFix key controls which items are filtered from the Norton QuickMenus cascading history lists.
<UL>
<LI>The Norton QuickMenus component of Norton Navigator lets you add cascaded history lists to the Run and Documents items on the Windows Start menu.
<LI>
Values under this key:<UL>
<LI>
DaysElapsed  -- Number of days since last list filtration
<LI>
Filter CD-Rom  -- Filter all CD-ROM references from lists
<LI>
Filter Floppy -- Filter all floppy references from lists
<LI>
Filter Network -- Filter all network references from lists
<LI>
Filter TempFiles -- Filter all Temp files from lists
<LI>
MaxDays  -- Number of days between full filtration executions.</UL>
</UL>
<UL>
<LI><I>Note:</I> If you are using removable data storage media (such as floppy, CD-ROM, Bernoulli, ZIP, JAZ, or EZ drives) and you have Norton Navigator's Document History feature enabled, the removable media may be referenced in the history. If you change any of these Registry settings and the removable media is not available when Windows starts, you may get a message indicating that the associated drive cannot be found.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000281">
<IMG SRC="RegKey.gif">
The History Lists key contains subkeys for programs that that include Norton FileAssist enhanced history lists on their Open, Save As, and Browse dialog boxes.
<UL>
<LI>Norton FileAssist enhanced commands and history lists are accessible by clicking the new icons that are added to the upper right corner of the dialog boxes.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000282">
<IMG SRC="RegVal.gif">
The XTG value toggles the Norton File Manager between Xtree Gold Mode and File Manager Mode.
<UL>
<LI>This software switch is normally set through the Norton File Manager user interface. Click General from the Options menu and select either File Manager or XTreeGold mode.
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<UL>
<LI>You need to refresh the desktop or current window for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000283">
<IMG SRC="RegVal.gif">
The LastTime value records the last time the Norton Navigator splash (startup) screen was displayed.
<UL>
<LI>To disable the Norton Navigator splash screen altogether, set this value to FF FF FF FF FF FF FF FF.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000291">
<IMG SRC="RegKey.gif">
The Internet Settings key contains installation information and settings for Internet Explorer.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000292">
<IMG SRC="RegKey.gif">
The MS-DOSOptions key includes subkey settings that control system resources and behavior when in a DOS application.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000293">
<IMG SRC="RegKey.gif">
The URL key contains default protocol prefix and alternate prefixes for internet application.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000922">
<IMG SRC="RegVal.gif">
The TCPIPNetBroadcast value turns off network broadcasts limiting network traffic.
<UL>
<LI>The browse list of known hosts is limited to TCP/IP hosts specified in the application option.
</UL>
<UL>
<LI>To reduce network traffic from  remote hosts 
<OL>
<LI>Create TCPIPNetBroadcast as a DWORD data value.
<LI>Set the value to a non-zero integer.
</OL>
</UL>
<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000923">
<IMG SRC="RegVal.gif">
The TCPIPQueryInterval value adjusts the delay between network broadcasts used to refresh the host list.
<UL>
<LI>To reduce network traffic,  increase the delay between broadcasts.
</UL>
<UL><LI><I>Default value:</I> 50 seconds, minimum value 30 seconds</UL>
<UL>
<LI>To reduce network traffic from  remote hosts 
<OL>
<LI>Create TCPIPQueryInterval as a DWORD data value.
<LI>Set the value in seconds (30 second minimum).
</OL>
</UL>
<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000924">
<IMG SRC="RegVal.gif">
The ServiceStealthMode value allows the host waiting icon and host dialog box to be hidden.
<UL>
<LI>Set the value to 1 to hide the host waiting icon.
</UL>
<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000925">
<IMG SRC="RegVal.gif">
Set the ConfirmComputerName value to return a computer name instead of the caller's name when in host mode.
<UL>
<LI>When pcAnywhere is in host mode and  the prompt to confirm connection checkbox is checked, the host computer dialog will normally show the caller's name. Set this value to 1 to have the remote computer name returned instead of the calller's name.
</UL>
<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000926">
<IMG SRC="RegVal.gif">
The AlwaysUseScanner value enables an alternate method of detecting screen changes.
<UL>
<LI>Certain video cards or drivers use non-standard video update methods that causes video to not appear correctly on the remote screen.
<LI>

<LI>
Set the AlwaysUseScanner value to 1 to enable an alternate menthod which may correct the problem.
</UL>
<UL>
<LI><I>Note:</I> This value is valid in pcAnywhere version 7.5 or later.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000324">
<IMG SRC="RegKey.gif">

<!-- Norton End ><HR>
 
<!-- Norton Start = "0000333">
<IMG SRC="RegKey.gif">
The Enum key contains device information for an alternative hardware setup when multiple configurations are installed.
<UL>
<LI>The devices that are different for the non-default configuration are enumerated here.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000341">
<IMG SRC="RegKey.gif">
The RemoteAccess key includes information used for the Dial-Up Networking feature.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000350">
<IMG SRC="RegKey.gif">
The BIOS key contains configuration information and settings for Plug and Play devices.
<UL>
<LI>Some devices that are not true plug and play hardware are given a plug and play wrapper by the operating system. This consists of a PNP* device ID, a reference to a hardware .INF file and a VxD.
</UL>
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000355">
<IMG SRC="RegKey.gif">
The PCI key contains information and settings for PCI bus installed devices and ISA to PCI device drivers.
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000927">
<IMG SRC="RegVal.gif">
The ConfirmSend value determines whether the host waits for an affirmative response to a send command from a remote PC.
<UL>
<LI>When the ConfirmSend value is set to 0, the remote PC does not get prompted for a confirmation for file transfers.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000356">
<IMG SRC="RegKey.gif">
The SCSI key contains settings and device driver information for any attached SCSI devices.
<UL>
<LI>The SCSI key includes SCSI logical unit number and target ID settings.
</UL>
<UL>
<LI><I>Note:</I> This data is maintained automatically by the system and should not be edited.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000357">
<IMG SRC="RegKey.gif">
The Accessibility key includes subkeys that control ease of use settings for users with physical impaiments.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000358">
<IMG SRC="RegKey.gif">
The HighContrast key contains the current status and  software switches to toggle to the high visisbilty mode for the display.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000360">
<IMG SRC="RegKey.gif">
The KeyboardResponse key contains the current status and software switches to control the autorepeat mode and keyboard delay.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000361">
<IMG SRC="RegKey.gif">
The MouseKeys key contains the current status and software switches that toggle mouse pointer functions to the keyboard arrows.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000362">
<IMG SRC="RegKey.gif">
The SerialKeys key contains the current status, baud rate, and active port for alternate input devices which connect to the serial port.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000364">
<IMG SRC="RegKey.gif">
The ShowSounds key contains the status and settings of visual cues to system warning beeps.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000368">
<IMG SRC="RegKey.gif">
The SoundSentry key contains the status and settings for how the display will behave to alert the hard of hearing of a system sound through visual cues.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000369">
<IMG SRC="RegKey.gif">
The StickyKeys key contains the settings and status of the sticky keys, a setting enabling the Ctrl, Alt, and Delete keys to be pressed one at a time and have Ctrl+Alt+Delete function.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000370">
<IMG SRC="RegKey.gif">
The TimeOut key controls when and if  the system will return to normal operation after a specified interval of inactivity.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000371">
<IMG SRC="RegKey.gif">
The ToggleKeys key contains settings to alert users when the Caps Lock, Num Lock, or Scroll Lock keys are toggled on and off.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000372">
<IMG SRC="RegKey.gif">
The Adapter key contains the CD-ROM device driver and INF file designations.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000373">
<IMG SRC="RegKey.gif">
The CDROM key contains device settings and installer DLL file information.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000374">
<IMG SRC="RegKey.gif">
The DiskDrive key contains enumerator subkeys and INF files for three generic disk drives.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000375">
<IMG SRC="RegKey.gif">
The Display key contains enumerator keys for display devices containing settings for the Windows default and various optional video modes at different horizontal and vertical resolutions and bits per pixel.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000376">
<IMG SRC="RegKey.gif">
The fdc key contains floppy disk controller driver, port driver and INF file information.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000377">
<IMG SRC="RegKey.gif">
The hdc key contains hard disk controller, port driver, and INF file information.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000378">
<IMG SRC="RegKey.gif">
The Keyboard key contains keyboard driver and INF file information.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000379">
<IMG SRC="RegKey.gif">
The MEDIA key contains device and driver infomation for installed multimedia components such as sound cards, video, and game controlers.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000380">
<IMG SRC="RegKey.gif">
The Modem key contains configuration, device driver, and command set information for installed modems.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000381">
<IMG SRC="RegKey.gif">
The Monitor key contains video monitor device driver,  INF file,  and maximum resolution setting information.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000382">
<IMG SRC="RegKey.gif">
The Mouse key contains device driver, INF file and mouse type information.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000383">
<IMG SRC="RegKey.gif">
The MTD key contains Memory Technology Driver information.
<UL>
<LI>If your system includes flash or SRAM memory devices, device driver infomation would be registered here.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000385">
<IMG SRC="RegKey.gif">
The MultiFunction key contains driver and INF file information for multi-function adapters.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000386">
<IMG SRC="RegKey.gif">
The Net key contains network adapter device driver, INF file, I/O address, and other configuration information.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000387">
<IMG SRC="RegKey.gif">
The NetClient key includes settings and preference information for installed network client services.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000388">
<IMG SRC="RegKey.gif">
The NetService key contains configuration settings and driver information for sharing local files and printers with other users on a network.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000389">
<IMG SRC="RegKey.gif">
The NetTrans key contains configuration, INF files, virtual driver, and other settings for installed network protocols.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000390">
<IMG SRC="RegKey.gif">
The nodriver key is a placeholder for installation of a device with no predefined Windows classification.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000391">
<IMG SRC="RegKey.gif">
The PCMCIA key contains configuration information for the PCMCIA socket.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000393">
<IMG SRC="RegKey.gif">
The Ports key contains enumerator subkeys for each serial and parallel port and includes driver, INF file and other settings.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000398">
<IMG SRC="RegKey.gif">
The Printer key contains enumerator subkeys with device driver and INF file information for each installed or shared printer.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000928">
<IMG SRC="RegVal.gif">
The ConfirmDelete value determines whether the host waits for an affirmative response to a delete command from a remote PC.
<UL>
<LI>When the ConfirmDelete value is set to 0, the remote PC does not get prompted for a confirmation for file deletions.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000401">
<IMG SRC="RegKey.gif">
The PrinterUpgrade key is a placeholder with the installer DLL for driver upgrades.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000402">
<IMG SRC="RegKey.gif">
The SCSIAdapter key contains DLL, SCSI enumerator, INF and other configuration information for SCSI controllers.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000406">
<IMG SRC="RegKey.gif">

<!-- Norton End ><HR>
 
<!-- Norton Start = "0000408">
<IMG SRC="RegKey.gif">
The System key includes enumerated subkeys containing driver descriptions for various system class resources.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000542">
<IMG SRC="RegKey.gif">
The boot section specifies the drivers, fonts, startup modules, shell, and files Windows needs when it starts.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000543">
<IMG SRC="RegKey.gif">
The boot.description section defines the devices you can change by running the Windows Setup program. You should not need to change the entries in this section. If you do, you will not be able to use Setup to update drivers.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000929">
<IMG SRC="RegVal.gif">
WallPaperOriginX is the pixel value for selecting an alternate horizontal starting point for displaying a wallpaper bitmap.
<UL>
<LI>The upper left corner of your display is pixel value 1,1. You can set any X/Y coordinate you wish for a centered image.
<LI>
This will force a single bitmap to the coordinates you set.
</UL>
<UL>
<LI>To move a centered wallpaper image to another location on the screen
<OL>
<LI>Create  WallPaperOriginX and WallPaperOriginY string values under the desktop key.
<LI>Enter X/Y values for the two keys.
</OL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000704">
<IMG SRC="RegVal.gif">
BkGndNotifyAtPFault specifies whether Windows controls a non-Windows application's access to the display or not. This setting prevents the corrupting of the display from non-Windows applications that are in the Background or being switched from (using Alt+Tab).
<UL>
<LI>A value of On allows Windows to control access to the display by non-Windows applications. A value of Off disables Windows from controlling access.<BR>
<LI>
On is typically used for VGA displays and Off for special hardware (such as TIGA or 8514).
</UL>
<UL><LI><I>Default value:</I> On</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000705">
<IMG SRC="RegVal.gif">
CGA40WOA.FON specifies the filename of a fixed-pitch font used for non-Windows applications with a display of 40 columns by 25 or fewer lines. The font specified is only used when non-Windows applications are displayed in a window and not in full screen.
<UL><LI><I>Default value:</I> CGA40WOA.FON in the United States</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000706">
<IMG SRC="RegVal.gif">
CGA80WOA.FON specifies the filename of a fixed-pitch font used for non-Windows applications with a display of 80 columns by 25 or fewer lines. The font specified is only used when non-Windows applications are displayed in a window and not in full screen.
<UL><LI><I>Default value:</I> CGA80WOA.FON in the United States</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000707">
<IMG SRC="RegVal.gif">
CGANoSnow specifies whether Windows does special handling to avoid snow appearing on an IBM CGA display device. On enables Windows to perform the snow handling, Off disables.
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000708">
<IMG SRC="RegVal.gif">
COMxAutoAssign specifies how Windows handles arbitration of communications port requests by more than one application. port-number specifies the communications port (1 through 4).
<UL>
<LI>COMport-numberAutoAssign=-1 | 0 | seconds<UL>
<LI>
If the value is -1, Windows asks you which application should be given control of the port (equivalent to the Always Warn option button in the 386 Enhanced Control Panel Applet). If the value is 0, any application can use the port at any time (equivalent to the Never Warn option button in the 386 Enhanced Control Panel Applet).
<LI>
Otherwise, the value specifies the time (in seconds) after an application stops using the port before another application can use the same port (equivalent to the Idle option button in the 386 Enhanced Control Panel Applet).</UL>
</UL>
<UL><LI><I>Default value:</I> 2</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000709">
<IMG SRC="RegVal.gif">
COMxBase specifies the base address for the serial port adapter you are using for 386 Enhanced mode.
<UL>
<LI>COMport-numberBase=address<UL>
<LI>
The value port-number is the port (1 through 4) and address is the base address for this port.</UL>
</UL>
<UL><LI><I>Default value:</I> none (Uses port address value in the BIOS data area and 3E8h for COM3.)</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000710">
<IMG SRC="RegVal.gif">
COMxBuffer specifies the number of characters that are be buffered from the communications port. The value port-number (1 through 4) is the communications port, and buffer-size is the number of characters to buffer.
<UL>
<LI>COMport-numberBuffer=buffer-size<UL>
<LI>
Buffering can slow down communications but may be required for high baud rates. 
<LI>
The actual value you use depends on the machine and the application you are using. </UL>
</UL>
<UL><LI><I>Default value:</I> 128</UL>
<UL>
<LI><I>Note:</I> Refer to COMport-numberIrq= before changing this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000711">
<IMG SRC="RegVal.gif">
COMxFIFO specifies whether the FIFO (First-in First-out) buffer is used, if it exists.
<UL>
<LI>If the communication port is using other than a 16550 Universal Asynchronous Receiver Transmitter (UART), this statement is ignored. Otherwise, Windows enables the FIFO buffer if On or disables if Off for the port that corresponds to port-number (1 through 4).
</UL>
<UL><LI><I>Default value:</I> On</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000712">
<IMG SRC="RegVal.gif">
COMxIrq specifies which interrupt request line (IRQ) is used by the communications port.
<UL>
<LI>COMport-numberIrq=interrupt-line<UL>
<LI>
Specifies which interrupt request line (IRQ) is used by the communications port.
<LI>
The value port-number is the port (1 through 4). The value interrupt-line is the IRQ line. 
<LI>
The correct IRQ value depends on the hardware (check your hardware documentation).</UL>
</UL>
<UL><LI><I>Default value:</I> (for ISA and EISA machines)
COM1Irq=4
COM2Irq=3
COM3Irq=4
COM4Irq=3
(for MCA machines)
COM1Irq=4
COM2Irq=3
COM3Irq=3
COM4Irq=3</UL>
<UL>
<LI><I>Note:</I> If a conflict arises between ports, set one or more ports to -1 to disable input.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000713">
<IMG SRC="RegVal.gif">
COMIrqSharing specifies whether Windows allows COM interrupt request lines (IRQ) to be sharable between multiple communication ports or devices. Set to On if COM3 or COM4 use the same IRQ as COM1 or COM2.
<UL><LI><I>Default value:</I> On (for MCA machines)
Off (for all others)</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000714">
<IMG SRC="RegVal.gif">
COMxProtocol specifies whether Windows 386 Enhanced mode should simulate characters in a virtual machine after the virtual machine sends an XOFF to the communications port indicated by port-number (1 through 4).
<UL>
<LI>Set this statement to XOFF if applications using high baud rates lose characters during text transfers. This causes Windows to stop simulating characters when a virtual machine sends an XOFF and resume when the virtual machine sends another character after the XOFF.
<LI>
COMport-numberProtocol=xoff | blank | characters
<LI>
If a value other then XOFF is encountered (the statement is left blank or any other character string appears), then Windows doesn't check for XOFF characters.
<LI>
Refer to COMport-numberBuffer= if you are losing characters.
</UL>
<UL><LI><I>Default value:</I> blank</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000715">
<IMG SRC="RegVal.gif">
COMBoostTime specifies the time to allow a virtual machine to process a COM interrupt.
<UL>
<LI>COMBoostTime=milliseconds<UL>
<LI>
The value milliseconds should be increased if a communications application is losing keyboard characters on the display.</UL>
</UL>
<UL><LI><I>Default value:</I> 2</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000716">
<IMG SRC="RegVal.gif">
COMdrv30 specifies whether the Virtual COM Driver (VCD) uses its own copy of the serial communication driver's interrupt handler.
<UL>
<LI>Setting to On improves performance of COM ports and must be done if applications require the Windows 3.0 serial communications driver. Set to Off if you are using the Windows 3.1 serial communications driver (standard).
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000717">
<IMG SRC="RegVal.gif">
Device specifies which virtual devices are being used with Windows 386 Enhanced mode.
<UL>
<LI>device=filename | *device-name
</UL>
<UL><LI><I>Default value:</I> none</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000718">
<IMG SRC="RegVal.gif">
Display specifies which display device driver is being used with Windows 386 Enhanced mode.
<UL>
<LI>display=filename | *device-name
</UL>
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000719">
<IMG SRC="RegVal.gif">
DMABufferIn1MB specifies whether Windows should place the Direct Memory Access (DMA) buffer memory in the first megabyte of memory (if possible, above 640K).
<UL>
<LI>This provides compatibility with 8-bit bus master cards. A value of On forces Windows to place the buffer in the first megabyte, Off does not.
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000720">
<IMG SRC="RegVal.gif">
DMABufferSize specifies the Direct Memory Access (DMA) buffer memory size.
<UL>
<LI>DMABufferSize=kilobytes
<LI>
Windows 386 Enhanced mode defaults to a DMA buffer size that can handle disk access.
</UL>
<UL><LI><I>Default value:</I> 16</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000721">
<IMG SRC="RegVal.gif">
DOSPromptExitInstruc specifies whether Windows displays a message box when entering a DOS Prompt. This message box contains information on how to exit and switch away from the DOS Prompt and how to place the DOS Prompt in a Window.
<UL><LI><I>Default value:</I> none (On assumed)</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000722">
<IMG SRC="RegVal.gif">
DualDisplay specifies whether Windows 386 Enhanced mode uses the memory between B000:0000 and B7FF:0000 or not.
<UL>
<LI>If set to Off, this address range is available on EGA systems but not on VGA systems (because they support monochrome modes which use this address range).
<LI>
If this statement is to On, the address range remains unused and can be used by a secondary display or a memory manager.
</UL>
<UL><LI><I>Default value:</I> none</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000723">
<IMG SRC="RegVal.gif">
EBIOS specifies the extended BIOS device being used with Windows 386 Enhanced mode.
This statement is a synonym for device=.
<UL>
<LI>EBIOS=filename | *device-name
</UL>
<UL><LI><I>Default value:</I> Assigned by Windows� Setup</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000724">
<IMG SRC="RegVal.gif">
EISADMA specifies the operation mode of an extended Direct Memory Access (DMA) channel. Extended DMA channels are used on Extended Industry Standard Architecture (EISA) machines only.
<UL>
<LI>EISADMA=Off | channel, size [; ...]
<LI>

<LI>
Set this statement to Off if you are using an EISA machine and Windows does not run in 386 Enhanced mode. If you are using a non-EISA machine Windows ignores any value this statement has and assumes Off.
<LI>
Use the channel, size pairs to specify the transfer sizes for one or more DMA channels. A valid transfer size can be:<PRE>
<LI>
Value &npsp;&npsp;&nbsp;&nbsp;&nbsp Meaning
<LI>

<LI>
8&nbsp;&nbsp;&nbsp;&nbsp;&nbsp 8-bit
<LI>
16w&nbsp;&nbsp16-bit specified in words
<LI>
16b &nbsp;&nbsp16-bit specified in bytes
<LI>
32 &nbsp;&nbsp;&nbsp32-bit</PRE>
</UL>
<UL><LI><I>Default value:</I> 0,8; 1,8; 2,8; 3,8; 5,16w; 6,16w; 7,16w</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000725">
<IMG SRC="RegVal.gif">
EMMExclude specifies a memory address range that Windows does not scan to find unused address space.
<UL>
<LI>EMMExclude=paragraph-range<UL>
<LI>
The range, paragraph-range, must be two paragraph values separated by a hyphen between A000 and EFFF. 
<LI>
The first value is rounded down and the second rounded up to the nearest multiple of 16K. 
<LI>
To exclude more than one address range add another EMMExclude= statement to SYSTEM.INI under the [386Enh] section.</UL>
</UL>
<UL><LI><I>Default value:</I> none</UL>
<UL>
<LI><I>Note:</I> The EMMInclude= statement takes precedence over any range specified in any EMMExclude= statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000726">
<IMG SRC="RegVal.gif">
EMMInclude specifies a memory address range that Windows scans to find unused address space.
<UL>
<LI>EMMInclude=paragraph-range<UL>
<LI>
The range, paragraph-range, must be two paragraph values separated by a hyphen between A000 and EFFF. 
<LI>
The first value is rounded down and the second rounded up to the nearest multiple of 16K.
<LI>
To include more than one address range add another EMMInclude= statement to SYSTEM.INI under the [386Enh] section.
<LI>
By including an address range, Windows turns on the RAM and ROM search code for that range. 
<LI>
Use ReservedHighArea= if you need granularity of less than 16K.</UL>
</UL>
<UL><LI><I>Default value:</I> none</UL>
<UL>
<LI><I>Note:</I> The EMMInclude= statement takes precedence over any range specified in any EMMExclude= statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000727">
<IMG SRC="RegVal.gif">
EMMPageFrame specifies the paragraph where the 64K page frame begins if Windows cannot find a suitable page frame.
<UL>
<LI>EMMPageFrame=paragraph
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default in the [386Enh] section. However, Windows assumes none.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000728">
<IMG SRC="RegVal.gif">
EMMSize specifies the total memory to be made available for expanded memory mapping. Change the value for this statement if you run an application and can never create another virtual machine.
<UL>
<LI>EMMSize=kilobytes<UL>
<LI>
A value of 65,536 allocates the maximum possible amount of system memory as expanded memory.
<LI>
A value of 0 causes no system memory to be allocated as expanded memory but does not prevent the EMS driver from being loaded (see the NoEMMDriver= statement).</UL>
</UL>
<UL><LI><I>Default value:</I> 65,536</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000729">
<IMG SRC="RegVal.gif">
FileSysChange specifies whether File Manager automatically receives messages any time a non-Windows application deletes, renames, or creates a file.
<UL><LI><I>Default value:</I> On</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<UL>
<LI><I>Note:</I> Setting this statement to On can slow down system performance.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000730">
<IMG SRC="RegVal.gif">
Global specifies DOS devices that should be global to the system.
<UL>
<LI>Certain virtual devices specify that DOS devices be local (MS$MOUSE, for example--see LocalTSRs= for more information). To override local devices, enter the device's name exactly as it appears in CONFIG.SYS.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes that all devices in CONFIG.SYS are global to the system.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000731">
<IMG SRC="RegVal.gif">
HardDiskDMABuffer specifies the size of the Direct Memory Access (DMA) buffer. This amount is determined automatically if you are using SMARTDrive and double buffering.
<UL>
<LI>The value for this statement may need to be changed if you are using a hard disk that supports DMA but either you are not using SMARTDrive, or you do not have double buffering enabled.
</UL>
<UL><LI><I>Default value:</I> 0 for ISA and EISA machines (AT architectures),  64 for MCA machines (Micro Channel Architecture) that use DMA channel 3</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000732">
<IMG SRC="RegVal.gif">
IdleVMWakeUpTime specifies a time interval used to wake up idle virtual machines. This is done by using timer interrupts (INT 8 or INT 1Ch).
<UL>
<LI>IdleVMWakeUpTime=seconds
<LI>
Windows does not usually force timer interrupts into virtual machines that do not use them unless the virtual machine is active. This statement forces the timer interrupts to occur.
<LI>
The value you give this statement is rounded down to the nearest power of two (for example, 1, 2, 4, 8, and so on).
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 8.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000733">
<IMG SRC="RegVal.gif">
IgnoreInstalledEMM specifies whether Windows should start up in 386 Enhanced mode even if there is an unknown expanded memory manager (EMM) running.
<UL>
<LI>IgnoreInstalledEMM=Off | On
<LI>
Using Windows with an unknown EMM can cause system failure. If there is no EMM software running on your machine or there is but it is not active while running Windows, you can set this statement to On.
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<UL>
<LI><I>Note:</I> This statement only applies to EMMs servicing physical EMS hardware. Windows does not disable unrecognized 80386 expanded memory emulators.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000734">
<IMG SRC="RegVal.gif">
InDOSPolling specifies whether Windows prevents other applications from running when memory-resident software has the InDOS flag set.
<UL>
<LI>This flag is used to determine the status of DOS interrupt calls. Since DOS interrupts are not re-entrant, the status of this flag can affect memory-resident software that uses DOS interrupts.
<LI>
Setting this statement to On slows down system performance but may be required for critical sections of memory-resident software that use DOS interrupts.
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000735">
<IMG SRC="RegVal.gif">
INT28Critical specifies whether a critical section is needed to handle INT 28h interrupts.
<UL>
<LI>INT 28h is typically used by memory-resident software and some network virtual devices (which may use it for internal task switching). This interrupt may cause the system to hang in such cases and thus Windows needs a critical section which is established by setting this statement to On.
</UL>
<UL><LI><I>Default value:</I> On</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000736">
<IMG SRC="RegVal.gif">
IRQ9Global specifies whether to convert interrupt request level 9 (IRQ 9) masks to global.
<UL>
<LI>Set this statement to On if your system hangs when attempting to read from a floppy drive. Also set to On if you want Windows to read the floppy drive before starting Windows.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of Off.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000737">
<IMG SRC="RegVal.gif">
Keyboard specifies which keyboard device is being used with Windows 386 Enhanced mode.
<UL>
<LI>keyboard=filename | *device-name
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000738">
<IMG SRC="RegVal.gif">
KeyBoostTime specifies how much time an application has to run (with increased priority) when it receives a keystroke.
<UL>
<LI>KeyBoostTime=seconds
<LI>
You may want to increase this value when several applications are running in the background.
</UL>
<UL><LI><I>Default value:</I> .001</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000739">
<IMG SRC="RegVal.gif">
KeyBufferDelay specifies the time to delay pasting keyboard input once the keyboard buffer is full.
<UL>
<LI>KeyBufferDelay=seconds<UL>
<LI>
Some applications require more time than the default.
<LI>
Specifies the time to delay pasting keyboard input once the keyboard buffer is full.</UL>
</UL>
<UL><LI><I>Default value:</I> .2</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000740">
<IMG SRC="RegVal.gif">
KeyIdleDelay specifies how long Windows ignores idle calls after placing a simulated keystroke into a virtual machine.
<UL>
<LI>KeyIdleDelay=seconds
<LI>
Set this to 0 to speed up keyboard input but note that this may affect some applications' performances.
</UL>
<UL><LI><I>Default value:</I> .5</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000741">
<IMG SRC="RegVal.gif">
KeyPasteCRSkipCount specifies how many times an INT 16h call for keyboard status should return "empty" for the keyboard buffer after a carriage return.
<UL>
<LI>KeyPasteCRSkipCount=number
<LI>
This statement is used for pasting Clipboard data to non-Windows applications. It gives these applications more time to process incoming characters before continuing to paste the remainder of the Clipboard.
<LI>
This statement is used in conjunction with the KeyPasteSkipCount= statement.
</UL>
<UL><LI><I>Default value:</I> 10</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000742">
<IMG SRC="RegVal.gif">
KeyPasteDelay specifies how long to wait before pasting a character after a key has been pasted.
<UL>
<LI>KeyPasteDelay=seconds
<LI>
This statement gives applications more or less time to process keystrokes. 
<LI>
Note the difference between key and character. A character is what the application reads from the buffer and a key is the actual keyboard button.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of .003.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000743">
<IMG SRC="RegVal.gif">
KeyPasteSkipCount specifies how many times an INT16h call for keyboard status should return "empty" for the keyboard buffer after pasting a character.
<UL>
<LI>KeyPasteSkipCount=number
<LI>
This statement is used for pasting Clipboard data to non-Windows applications. It gives these applications more time to process incoming characters before continuing to paste the remainder of the Clipboard.
<LI>
This statement is used in conjunction with the KeyPasteCRSkipCount= statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000744">
<IMG SRC="RegVal.gif">
KeyPasteTimeout specifies the time Windows waits before changing from the fast paste (INT16h) to slow paste (INT9h) mechanism.
<UL>
<LI>KeyPasteTimeout=seconds
<LI>
If an application does not make the necessary BIOS calls for reading keyboard input, Windows switches to the slow paste mechanism.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 1.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000745">
<IMG SRC="RegVal.gif">
KybdPasswd specifies whether the Virtual Keyboard Device (VKD) should support PS/2 8042 commands.
<UL>
<LI>PS/2 computers use the 8042 keyboard controller, which has commands available for password security.
</UL>
<UL><LI><I>Default value:</I> On for IBM PS/2 computers; Off for all others</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000746">
<IMG SRC="RegVal.gif">
KybdReboot specifies whether Windows attempts to reboot your computer using a keyboard controller command.
<UL>
<LI>This method is unreliable on certain computers. If your computer hangs while rebooting, set this statement to Off. Windows then exits and displays a prompt for you to press Ctrl+Alt+Del a second time.
</UL>
<UL><LI><I>Default value:</I> On</UL>
<UL><LI><I>Valid range:</I> On-Off</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000747">
<IMG SRC="RegVal.gif">
Local specifies DOS device drivers that should be local to virtual machines.
<UL>
<LI>Local=device-name
</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000748">
<IMG SRC="RegVal.gif">
LocalLoadHigh specifies how Windows uses the upper memory blocks (UMB).
<UL>
<LI>If this statement is Off, Windows uses all UMBs and leave no extras for virtual machines.
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000749">
<IMG SRC="RegVal.gif">
LocalReboot specifies whether Windows restarts or quits applications that hang when Ctrl+Alt+Del is pressed.
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000750">
<IMG SRC="RegVal.gif">
LPTxAutoAssign specifies information for Windows version 3.0 only. These statements only appear if you have upgraded to Windows 3.1.
<UL>
<LI>LPTport-numberAutoAssign=seconds
</UL>
<UL><LI><I>Default value:</I> 60</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000751">
<IMG SRC="RegVal.gif">
LRULowRateMult specifies the value that the LRUSweepFreq= statement is multiplied by to determine the Least Recently Used (LRU) low paging rate, sweep frequency.
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 10.</UL>
<UL><LI><I>Valid range:</I> 1-65,535</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000752">
<IMG SRC="RegVal.gif">
LRURateChngTime specifies the length of time that the Virtual Memory Manager (VMM) stays at its high rate or low rate before switching to the next state.
<UL>
<LI>LRURateChngTime=milliseconds
<LI>
The states, in order, are as follows: <UL>
<LI>
high rate sweeping
<LI>
low rate sweeping
<LI>
no sweeping</UL>
<LI>
The value milliseconds determines the idle time (no paging required) that Windows waits before dropping to the next lower state.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 10,000.</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000753">
<IMG SRC="RegVal.gif">
LRUSweepFreq specifies the value used to determine the Least Recently Used (LRU) high paging rate, sweep frequency.
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 250.</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000754">
<IMG SRC="RegVal.gif">
LRUSweepLen specifies the length in pages of the region swept on each pass.
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 1024.</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000755">
<IMG SRC="RegVal.gif">
LRUSweepLowWater specifies when the Least Recently Used (LRU) sweeper should be used.
<UL>
<LI>LRUSweepLowWater=page-size
<LI>
When the number of free pages drops below this value, the sweeper is turned on.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 24.</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000756">
<IMG SRC="RegVal.gif">
LRUSweepReset specifies the time desired for an ACC bit reset divided by 4 MB of pages.
<UL>
<LI>LRUSweepReset=milliseconds
<LI>
The time to reset all ACC bits follows this formula: 
<LI>
value of LRUSweepReset * (number-of-pages-in-your-system + 1023) / 1024
<LI>
where 1024 is the number of pages equivalent to 4 MB.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 500.</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000757">
<IMG SRC="RegVal.gif">
MaxBPs specifies the maximum number of breakpoints that can be used by the virtual memory manager (VMM).
<UL>
<LI>MaxBPs=number
<LI>
Breakpoints are used to transfer control to Windows 386 Enhanced mode. 
<LI>
You may need to increase this value if you are using an OEM virtual device driver that requires more breakpoints.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 200.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000758">
<IMG SRC="RegVal.gif">
MapPhysAddress specifies the address range (in megabytes) that is preallocated for DOS device drivers.
<UL>
<LI>MapPhysAddress=range
<LI>
Use this statement if you are using DOS device drivers that require contiguous memory (such as an older version of RAMDrive that requires extended memory). When this statement is given a range, Windows' memory manager preallocates physical page-table entries and linear address space.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000759">
<IMG SRC="RegVal.gif">
MaxCOMPort specifies the maximum number of COM ports that 386 Enhanced mode supports.
<UL>
<LI>MaxCOMPort=number
<LI>
Change this value if you have more than four COM ports in your system.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 4.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000760">
<IMG SRC="RegVal.gif">
MaxDMAPGAddress specifies the maximum physical page address that DMA can use.
<UL>
<LI>MaxDMAPGAddress=address
<LI>
This statement is only used for hard drives that support DMA.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 0FFFh for non-EISA computers; 0FFFFFh for EISA computers.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000761">
<IMG SRC="RegVal.gif">
MaxPagingFileSize specifies the maximum size for a temporary swap file.
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a maximum size equivalent to 50 percent of available disk space.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000762">
<IMG SRC="RegVal.gif">
MaxPhysPage specifies the maximum physical page number that the virtual memory manager (VMM) can manage as a usable page. This allows inclusion of pages beyond what the VMM recognized at startup.
<UL>
<LI>MaxPhysPage=hexadecimal-page-number
<LI>
If you specify a value less than what the VMM determines, the VMM ignores several pages it would normally use.
<LI>
This statement is useful if you are using a hardware device that cannot recognize all of the physical memory on your computer.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assigns a value based on the highest physical page number detected by the VMM during initialization.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000763">
<IMG SRC="RegVal.gif">
MCADMA specifies whether Windows should use the Micro Channel Architecture (MCA) extensions to DMA.
<UL>
<LI>This statement only applies to MCA computers. You should set this statement to Off if you are using an MCA computer and DMA extensions are not implemented.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assigns a value of On for most MCA computers and Off for all others.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000764">
<IMG SRC="RegVal.gif">
MessageBackColor specifies the background color used for message screens.
<UL>
<LI>MessageBackColor=vga-color-attribute
</UL>
<UL><LI><I>Default value:</I> 1(blue)</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000765">
<IMG SRC="RegVal.gif">
MessageTextColor specifies the foreground color used for message screens.
<UL><LI><I>Default value:</I> F(white)</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000766">
<IMG SRC="RegVal.gif">
MinTimeSlice specifies the minimum processor time slice a virtual machine is allowed.
<UL>
<LI>MinTimeSlice=milliseconds
<LI>
Decreasing the value milliseconds makes multitasking smoother but decreases system performance.
</UL>
<UL><LI><I>Default value:</I> 20</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000767">
<IMG SRC="RegVal.gif">
MinUnlockMem specifies the amount of memory that must be available for use when resuming a virtual machine while more than one virtual machine is running.
<UL>
<LI>MinUnlockMem=kilobytes
<LI>
This statement unlocks memory and makes it available to virtual machines.
</UL>
<UL><LI><I>Default value:</I> 40</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000768">
<IMG SRC="RegVal.gif">
MinUserDiskSpace specifies how much disk space to leave free when using a temporary swap file.
<UL>
<LI>MinUserDiskSpace=kilobytes
<LI>
This statement should be used when the hard drive used for paging has less space available than Windows can use.
<LI>
This statement is ignored if you are using a permanent swap file.
</UL>
<UL><LI><I>Default value:</I> 2000</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000769">
<IMG SRC="RegVal.gif">
Mouse specifies which mouse device is being used with Windows 386 Enhanced mode.
<UL>
<LI>mouse=filename | *device-name
<LI>
The filename is a virtual device file (usually with a .386 extension). If an asterisk (*) appears, the device-name that follows refers to a built-in virtual device (which resides in WIN386.EXE). 
<LI>
Windows Setup assigns a value based on your system configuration.
<LI>
This is a synonym for device=.
</UL>
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000770">
<IMG SRC="RegVal.gif">
MouseSoftInit specifies whether to send a hardware or software initialization to interrupt INT33h when a non-Windows application requests a hardware initialization.
<UL>
<LI>A hardware initialization call is function 0 of INT33h while a software initialization call is function 33 of INT33h.
<LI>
You should set this statement to On when you want to use non-Windows applications in a window with a mouse. If the cursor and screen information appear distorted, set this statement to Off.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000771">
<IMG SRC="RegVal.gif">
NetAsynchFallback specifies how Windows handles a failed asynchronous NetBIOS request.
<UL>
<LI>Windows attempts to save a failed asynchronous NetBIOS request by allocating space in its global network buffer. If there is insufficient space in the global buffer and this statement is set to On, Windows attempts to save the request in local memory. Windows then prevents any other virtual machines from running until the data is received and the time period specified by the NetAsynchTimeout= statement expires.
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000772">
<IMG SRC="RegVal.gif">
NetAsynchTimeout specifies the timeout period Windows uses when servicing asynchronous NetBIOS requests. This value is only used when the NetAsynchFallback= statement is set to On.
<UL>
<LI>NetAsynchTimeout=seconds
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 5.0.</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000773">
<IMG SRC="RegVal.gif">
NetDMASize specifies the DMA buffer size for NetBIOS transport software if a network has been installed.
<UL>
<LI>NetDMASize=kilobytes
<LI>
The buffer size used is the larger of this value and the value of DMABufferSize=.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 32 on Micro Channel machines, 0 on others.</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000774">
<IMG SRC="RegVal.gif">
NetHeapSize specifies the size of data-transfer buffers used for transferring network data.
<UL>
<LI>NetHeapSize=kilobytes
<LI>
Windows 386 Enhanced mode allocates buffers in conventional memory for transferring data over a network. The buffer size is the value of number rounded up to the nearest 4K.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default; Windows assumes a value of 12.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000775">
<IMG SRC="RegVal.gif">
Network specifies which network device is being used with Windows 386 Enhanced mode.

The network section has migrated to the registry:HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\Vnetsetup
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000776">
<IMG SRC="RegVal.gif">
NMIReboot specifies whether Windows reboots when a nonmaskable interrupt (NMI) occurs.
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000777">
<IMG SRC="RegVal.gif">
NoEMMDriver specifies whether Windows 386 Enhanced mode can install the expanded memory driver. The EMMSize= statement can prevent UMBs from being allocated but cannot prevent the EMS driver from being loaded.
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000778">
<IMG SRC="RegVal.gif">
NoWaitNetIO specifies whether Windows converts synchronous NetBIOS commands to asynchronous commands.  

When set to On, Windows converts NetBIOS commands, which can improve overall system performance.
<UL><LI><I>Default value:</I> On</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000779">
<IMG SRC="RegVal.gif">
OverlappedIO specifies whether several virtual machines can make read and write requests before the first request is completed.
Set this statement to On to enable multiple requests, 0 to disable.
<UL><LI><I>Default value:</I> Off if InDOSPolling=On; otherwise On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000780">
<IMG SRC="RegVal.gif">
PageBuffers specifies the number of 4K page buffers used to store read and write pages.
<UL>
<LI>PageBuffers=number
<LI>
This statement is used only if you are using 32-Bit Disk Access and a permanent swap file.
</UL>
<UL><LI><I>Default value:</I> 4</UL>
<UL><LI><I>Valid range:</I> 0-32</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000781">
<IMG SRC="RegVal.gif">
PageOverCommit specifies the multiplier that determines the amount of linear address space the virtual memory manager (VMM) creates for the system.
<UL>
<LI>PageOverCommit=megabytes
<LI>
This is computed by rounding the amount of physical memory up to the nearest 4MB and then multiplying by PageOverCommit=.
<LI>
Increasing this value increases available linear address space and causes paging activity to increase proportionately.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 4.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000782">
<IMG SRC="RegVal.gif">
Paging specifies whether to use demand paging.
<UL>
<LI>Set this statement to Off if you need the disk space that a temporary swap file would normally use.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000783">
<IMG SRC="RegVal.gif">
PagingDrive specifies the disk drive that Windows 386 Enhanced mode uses for a temporary swap file. This statement is ignored when using a permanent swap file.
<UL>
<LI>Windows attempts to place the temporary swap file on the same drive that SYSTEM.INI resides on if you do not have a permanent swap file and no drive is indicated, or the indicated drive does not exist.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of none.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000784">
<IMG SRC="RegVal.gif">
PagingFile specifies the path and filename for the temporary swap file that Windows creates when you start Windows in 386 Enhanced mode. The file is deleted when you exit Windows.
<UL><LI><I>Default value:</I> WINDOWS\WIN386.SWP</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000785">
<IMG SRC="RegVal.gif">
PerformBackfill specifies whether Windows checks for 640K and allocates a full 640K of base conventional memory when less is present.
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000786">
<IMG SRC="RegVal.gif">
PermSwapDOSDrive specifies the disk drive used for a permanent swap file. This is ignored if you are using a temporary swap file.
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of none.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000787">
<IMG SRC="RegVal.gif">
PermSwapSizeK specifies the desired size of a permanent swap file.
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of none.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000788">
<IMG SRC="RegVal.gif">
PerVMFILES specifies the number of file handles allocated to each virtual machine. The handles allocated are local or private to each virtual machine.
<UL>
<LI>PerVMFILES=number
<LI>
The total number of files handles, including the global handles in the files= statement in CONFIG.SYS, cannot exceed 255. If this value is exceeded it is rounded down to 255.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 10.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000789">
<IMG SRC="RegVal.gif">
PSPIncrement specifies the 4-word increments of additional memory that Windows should reserve in each successive virtual machine. This additional memory is only allocated when the UniqueDOSPSP= statement is set to On.
<UL>
<LI>PSPIncrement=number
<LI>
The best value for number depends on your memory configuration and the applications you are running.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 2.</UL>
<UL><LI><I>Valid range:</I> 2-64</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000790">
<IMG SRC="RegVal.gif">
ReflectDOSInt2A specifies whether Windows should pass interrupt INT2Ah on to other applications.
<UL>
<LI>If set to Off,  Windows does not pass INT2Ah on to other applications which increases performance. However, if you are running memory-resident software that relies on INT2A messages, you need to set this statement to On.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000791">
<IMG SRC="RegVal.gif">
ReservedHighArea specifies a memory address range that Windows does not scan to find unused address space.
<UL>
<LI>ReservedHighArea=paragraph-range
<LI>
The range, paragraph-range, must be two paragraph values between A000 and EFFF, separated by a hyphen. The first value is rounded down and the second rounded up to the nearest multiple of 4K. To exclude more than one address range add another ReservedHighArea= statement to SYSTEM.INI under the [386Enh] section.
<LI>
By excluding an address range, Windows turns off the RAM and ROM search code for that range. The scanning that normally occurs when not excluding an address range can interfere with certain adapters.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of none.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000792">
<IMG SRC="RegVal.gif">
ReservePageFrame specifies whether EMS page frame space or conventional memory is used for DOS transfer buffers.
<UL>
<LI>This statement is used only when EMS page frame space is the only space available between 640K and 1MB for transfer buffers. When set to On, Windows preserves the page space at the expense of conventional memory.
<LI>
If you are not going to use non-Windows applications that use expanded memory, this statement can be set to Off.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000793">
<IMG SRC="RegVal.gif">
ReserveVideoROM specifies to Windows that video ROM exists in pages C6 and C7.
<UL>
<LI>Set this statement to On if the text font is scrambled when you use non-Windows applications.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of Off.</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement (even when set to Off Windows detects video ROM).
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000794">
<IMG SRC="RegVal.gif">
ROMScanThreshold specifies how many memory transitions must occur to determine whether the memory is ROM. This memory is in the adapter area.
<UL>
<LI>The memory scan occurs when the adapter area has no ROM header or the header is incorrect. If the scan results in more than number memory transitions, Windows sets the memory aside as ROM. Otherwise, Windows considers the memory as usable.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 20.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000795">
<IMG SRC="RegVal.gif">
ScrollFrequency specifies the number of lines you can scroll in a non-Windows application before its display is updated.
<UL>
<LI>ScrollFrequency=number
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 2.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000796">
<IMG SRC="RegVal.gif">
SGrabLPT specifies the port to route all printer interrupts to in the system virtual machine rather than the current virtual machine.
<UL>
<LI>SGrabLPT=port-number
</UL>
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000797">
<IMG SRC="RegVal.gif">
SyncTime specifies that Windows periodically synchronizes its time with the computer's CMOS clock.
<UL>
<LI>Windows can usually maintain the correct time when this statement is set to Off, unless TrapTimerPorts=Off and you run applications that cause the system time to run faster or slower than the actual time (this is usually caused by modifying how often timer interrupts occur).
</UL>
<UL><LI><I>Default value:</I> On</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000798">
<IMG SRC="RegVal.gif">
SystemROMBreakPoint specifies whether Windows should use the ROM address space between F000:0000 and 1 MB for a breakpoint.
<UL>
<LI>Windows 386 Enhanced mode searches this space for an instruction used as a system breakpoint. If there is something other than permanently available ROM, this statement is set to Off.
</UL>
<UL>
<LI><I>Note:</I> This statement does not appear by default. However, Windows assumes a value of On if DOS was in Real mode when Windows was started or Off if in Protected mode. The later is usually the case when using memory managers such as QEMM or 386Max, or when using Windows from within OS/2).
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000799">
<IMG SRC="RegVal.gif">
SysVMEMSLimit specifies how many kilobytes of expanded memory to use.
<UL>
<LI>SysVMEMSLimit=number | kilobytes<UL>
<LI>
A value of 0 prevents Windows from using any expanded memory.
<LI>
 A value of -1 allows Windows to use all the available expanded memory.</UL>
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 2048.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000800">
<IMG SRC="RegVal.gif">
SysVMEMSLocked specifies whether expanded memory used by non-Windows applications is swapped to disk.
<UL>
<LI>If expanded memory is not swapped, it is considered locked and can improve non-Windows applications' performances. However, locking this memory can slow down the rest of the system.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of Off.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000801">
<IMG SRC="RegVal.gif">
SysVMEMSRequired specifies how much expanded memory must be available to start Windows.
<UL>
<LI>SysVMEMSRequired=kilobytes
<LI>
Do not change this statement if none of your non-Windows applications requires expanded memory.
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000802">
<IMG SRC="RegVal.gif">
SysVMV86Locked specifies whether to swap virtual-mode memory used by the system virtual machine to disk.
<UL>
<LI>When set to On, Windows locks the virtual-mode memory. Off allows it to be swapped to disk.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of Off.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement. Windows automatically handles this process.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000803">
<IMG SRC="RegVal.gif">
SysVMXMSLimit specifies the maximum amount of memory that DOS device drivers and memory-resident software receive from the extended memory driver in the system virtual machine.
<UL>
<LI>SysVMXMSLimit=number | kilobytes
<LI>
A value of -1 allocates all the available extended memory requested.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 2048.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000804">
<IMG SRC="RegVal.gif">
SysVMXMSRequired specifies how much extended memory the extended memory (XMS) driver must have reserved before starting Windows.
<UL>
<LI>SysVMXMSRequired=kilobytes
<LI>
Do not change this statement if none of your non-Windows applications will require extended memory.
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000805">
<IMG SRC="RegVal.gif">
TimerCriticalSection specifies that a critical section (with a timeout period) be used around all timer interrupt code.
<UL>
<LI>TimerCriticalSection=milliseconds
<LI>
A positive value results in only one virtual machine receiving timer interrupts at a time. Some networks and global memory-resident software can fail if this entry is not used. However, you can cause the system to be sluggish and even stop for short periods of time by using positive values.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 0.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000806">
<IMG SRC="RegVal.gif">
TokenRingSearch specifies whether Windows searches for a token ring network adapter on Industry Standard Architecture (ISA) machines.
<UL>
<LI>If you are not using a token ring card and/or the search interferes with another device, set this statement to Off.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000807">
<IMG SRC="RegVal.gif">
TranslateScans specifies whether Windows translates a keyboard's scan codes to make them compatible with standard IBM scan codes.
<UL>
<LI>This statement is only necessary for keyboards that generate non-standard scan codes. It is used only for the Switcher Screen and full-screen message boxes.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of Off.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000808">
<IMG SRC="RegVal.gif">
TrapTimerPorts specifies whether Windows allows applications to read from and write to the system timer ports.
<UL>
<LI>When set to Off, Windows can usually detect when an application has changed the timer interrupt interval and make the proper adjustments. However, sometimes Windows is not be able to keep accurate time.
<LI>
If Windows is not keeping accurate time, you can set this statement to On (which will not allow the timer interrupt interval to be changed) or set the SyncTime= statement to On.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000809">
<IMG SRC="RegVal.gif">
UniqueDOSPSP specifies whether to use a unique program starting point (PSP) for each virtual machine.
<UL>
<LI>If set to On, Windows reserves a particular amount of memory below an application running in a new virtual machine. For example, the first application can be loaded at address N, the second at N + i, the third at N + 2i, and so forth. 
<LI>
If set to Off, Windows will use the same PSP for each virtual machine. This can cause problems with some networks that use applications' PSPs to identify them.
</UL>
<UL><LI><I>Default value:</I> On if you are running a Microsoft-based network; Off for all others</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000810">
<IMG SRC="RegVal.gif">
UseableHighArea specifies a memory address range that Windows scans to find unused address space.
<UL>
<LI>UseableHighArea=paragraph-range
<LI>
The range, paragraph-range, must be two paragraph values between A000 and EFFF, separated by a hyphen. The first value is rounded down and the second rounded up to the nearest multiple of 4K. To include more than one address range add another UseableHighArea= statement to SYSTEM.INI under the [386Enh] section.
<LI>
By including an address range, Windows turns on the RAM and ROM search code for that range.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of none.</UL>
<UL>
<LI><I>Note:</I> The UseableHighArea= statement takes precedence over any range specified in any ReservedHighArea= statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000811">
<IMG SRC="RegVal.gif">
UseInstFile specifies whether Windows should look in the INSTANCE.386 file to determine if DOS data structures need to be local.
<UL>
<LI>This statement is provided for compatibility with Windows/386 version 2.x. Windows now uses two other methods to determine if DOS structures should be local. The first uses internal tables within the device. The second method uses an interrupt INT 2Fh call (documented in the OEM Adaptation Kit).
</UL>
<UL><LI><I>Default value:</I> Off</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000812">
<IMG SRC="RegVal.gif">
UseROMFont specifies whether Windows uses the video ROM soft font for displaying messages.
<UL>
<LI>The messages that fall into this category are those relating to full screen non-Windows applications, and text displayed when switching away from non-Windows applications.
<LI>
Set this statement to Off if you see random dots on screen, or if the font used to display messages is different from the font used in the application.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000813">
<IMG SRC="RegVal.gif">
VGAMonoText specifies whether to ignore the video memory address space used for the monochrome mode in the VGA adapter.
<UL>
<LI>When set to Off, Windows can use the address range from B000h through B7FFh in upper memory. However, no hardware device can use this range and no applications can use the monochrome mode of the VGA adapter.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000814">
<IMG SRC="RegVal.gif">
VideoBackgroundMsg specifies whether Windows displays a message when background applications are suspended or cannot update their displays properly.
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000815">
<IMG SRC="RegVal.gif">
VideoSuspendDisable specifies whether to suspend an application running in the background if its display becomes corrupted.
<UL>
<LI>When set to Off, the application is suspended and a message appears if VideoBackgroundMsg=On.
<LI>
This statement only applies to VGA displays.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of Off.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000816">
<IMG SRC="RegVal.gif">
VirtualHDIrq specifies whether Windows 386 Enhanced mode can terminate interrupts from the hard disk controller.
<UL>
<LI>When set to On, Windows intercepts hard disk interrupts (bypassing the ROM routine). However, some hard drives may need these interrupts which requires this statement to be Off.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of On for AT-compatible computers and Off for all other computers.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000817">
<IMG SRC="RegVal.gif">
WindowKBRequired specifies how much conventional memory must be free to start Windows.
<UL>
<LI>WindowKBRequired=kilobytes
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 256.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000818">
<IMG SRC="RegVal.gif">
WindowMemSize specifies how much conventional memory Windows can use for itself.
<UL>
<LI>WindowMemSize=number | kilobytes
<LI>
A value of -1 indicates that Windows can use a much memory as it needs. Any other value (must be less than 640) is the amount of memory Windows can use.
</UL>
<UL><LI><I>Default value:</I> -1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000819">
<IMG SRC="RegVal.gif">
WindowUpdateTime specifies the time between display updates of non-Windows applications running in a window.
<UL>
<LI>WindowUpdateTime=milliseconds
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 50.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000820">
<IMG SRC="RegVal.gif">
WinExclusive specifies whether Windows applications get all of the computer's processor time when they are in the foreground.
<UL>
<LI>When set to On, Windows does not allow non-Windows applications to run when in the background.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of Off.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000821">
<IMG SRC="RegVal.gif">
WinTimeSlice specifies the relative processing time given to foreground and background Windows applications relative to non-Windows applications.
<UL>
<LI>WinTimeSlice=number, number
<LI>
The first number is the relative foreground processing time. The second number is the relative background processing time.
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes values of 100 and 50 respectively.</UL>
<UL><LI><I>Valid range:</I> 1-10,000</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000822">
<IMG SRC="RegVal.gif">
WOAFont specifies which fonts are loaded into memory when running non-Windows applications.
<UL>
<LI>woafont=font-filename
<LI>
The fonts are available to Windows applications as long as a non-Windows application is running. These fonts can be made permanently available by adding them to your system using Control Panel.
</UL>
<UL><LI><I>Default value:</I> DOSAPP.FON</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000823">
<IMG SRC="RegVal.gif">
XlatBufferSize specifies the size of the conventional-memory buffer used to map DOS calls from Protected mode to virtual 386 Enhanced mode.
<UL>
<LI>XlatBufferSize=kilobytes
<LI>
A higher value can improve protected-mode Windows applications' performance at the cost of available memory for non-Windows applications. Additionally, higher values can cause problems with networks that use named pipes (usually a value of 4 works well for this problem).
</UL>
<UL><LI><I>Default value:</I> This statement does not appear by default. However, Windows assumes a value of 8.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000824">
<IMG SRC="RegVal.gif">
XMSUMBInitCalls specifies whether Windows uses the extended memory driver's UMB management routines.
<UL><LI><I>Default value:</I> This statement does not appear by default. Windows usually assumes a value of On. However, it can be Off depending on the extended memory manager you are using.</UL>
<UL><LI><I>Valid range:</I> Off-On</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000826">
<IMG SRC="RegVal.gif">
386grabber specifies the filename of the grabber, which is the device driver used for displaying DOS applications running in Windows Enhanced mode.
<UL>
<LI>386grabber=filename
</UL>
<UL><LI><I>Default value:</I> none</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000827">
<IMG SRC="RegVal.gif">
CachedFileHandles specifies the number of the most recently used executable files (.EXE) and dynamic-link library files (.DLL) that can remain open.
<UL>
<LI>CachedFileHandles=positive-number
<LI>
This statement is used to optimize Windows performance by keeping files open for fast access. However, if you are having problems running Windows from a network server you should decrease the value.
</UL>
<UL><LI><I>Default value:</I> 12</UL>
<UL><LI><I>Valid range:</I> 2-12</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000828">
<IMG SRC="RegVal.gif">
Comm.drv=filename specifies the filename of the serial communications driver to use.
<UL>
<LI> Windows setup updates this to comm.drv=comm.drv to support all 16 bit communications applications.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000829">
<IMG SRC="RegVal.gif">
Display.drv specifies the name of your system's display driver.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000830">
<IMG SRC="RegVal.gif">
Drivers specifies the filenames or aliases of installable drivers. These drivers are loaded when Windows is started.
<UL>
<LI>drivers=filename | alias-name
<LI>
An installable driver is a dynamic-link library (DLL) that is treated like a device driver by Windows. 
<LI>
If a driver requires a parameter, the driver must be specified using the alias= statement in the [drivers] section. Then the alias created can be used here.
</UL>
<UL><LI><I>Default value:</I> none</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000831">
<IMG SRC="RegVal.gif">
Fixedfon.fon specifies the filename of the fixed system font for Windows 2.x applications.
<UL><LI><I>Default value:</I> none</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000832">
<IMG SRC="RegVal.gif">
Fonts.fon specifies the filename for the porportionately spaced system font.
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000833">
<IMG SRC="RegVal.gif">
Keyboard.drv specifies the keyboard driver you are using.
<UL>
<LI>keyboard.drv=filename
</UL>
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000834">
<IMG SRC="RegVal.gif">
Language.dll specifies the dynamic-link library (DLL) with language-specific functions.
If no library is supplied, Windows uses the U.S. English DLL.
<UL><LI><I>Default value:</I> none</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000835">
<IMG SRC="RegVal.gif">
Mouse.drv specifies the mouse driver you are using.
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000836">
<IMG SRC="RegVal.gif">
Network.drv specifies the network driver you are using.
<UL><LI><I>Default value:</I> none</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000837">
<IMG SRC="RegVal.gif">
Oemfonts.fon specifies the font file for the OEM character set.
<UL><LI><I>Default value:</I> vgaoem.fon</UL>
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000838">
<IMG SRC="RegVal.gif">
SCRNSAVE.EXE specifies the name of the current screen-saver.
<UL><LI><I>Default value:</I> (None)</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000839">
<IMG SRC="RegVal.gif">
Shell specifies the program to use as the shell when you start Windows.
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000840">
<IMG SRC="RegVal.gif">
Sound.drv specifies the system sound driver.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000841">
<IMG SRC="RegVal.gif">
System.drv specifies the system hardware driver.
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000842">
<IMG SRC="RegVal.gif">
TaskMan.Exe specifies the application used for task-switching.
<UL>
<LI><I>Note:</I> This entry is retained for compatibility reasons, but is not supported in the user interface.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000843">
<IMG SRC="RegVal.gif">
CommandEnvSize specifies the size of the environment used for COMMAND.COM.
<UL>
<LI>CommandEnvSize=bytes
<LI>
This statement applies to a DOS shell and running any batch (.BAT) files. <UL>
<LI>
The value bytes can be either 0 or between 160 and 32768.
<LI>
 Invalid values for bytes are rounded up to 160 or down to 32768. </UL>
<LI>
If the value is less than the current environment size or 0, this statement is ignored. This is also ignored statement if you are running a DOS shell using a PIF file and have specified a different environment size.
</UL>
<UL><LI><I>Default value:</I> 0 with MS-DOS up to version 3.2; otherwise it is the value following the /e: parameter in the shell= line in CONFIG.SYS.</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000844">
<IMG SRC="RegVal.gif">
DisablePositionSave specifies when Windows saves the position and font used in a non-Windows application.
<UL>
<LI>DisablePositionSave=1 | 0
<LI>
This information is normally saved in DOSAPP.INI after quitting the application.<UL>
<LI>
Setting to 1 causes Windows to save the position and font to DOSAPP.INI only if the Save Settings On Exit checkbox is selected in the Fonts dialog box.
<LI>
Setting to 0 saves the position and font when you exit the application.</UL>
</UL>
<UL><LI><I>Default value:</I> none (0 is assumed)</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000845">
<IMG SRC="RegVal.gif">
FontChangeEnable specifies that Windows allows fonts to be changed for non-Windows applications.
<UL>
<LI>FontChangeEnable=1 | 0
<LI>
This statement (when set to 1) allows you to change fonts even if Windows 3.0 version video grabbers are in use.
</UL>
<UL><LI><I>Default value:</I> 1 for systems using Windows 3.1 grabbers; 0 for Windows 3.0 grabbers</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<UL>
<LI><I>Note:</I> If you are using Windows 3.0 version video grabbers, you may lose characters and the cursor may change position and size.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000846">
<IMG SRC="RegVal.gif">
GlobalHeapSize specifies the size of the buffer Windows allocates in conventional memory when running in Standard mode.
<UL>
<LI>GlobalHeapSize=kilobytes
<LI>
This buffer can be used to share information among non-Windows applications that are started from Windows.
<LI>
This statement has no effect in 386 Enhanced mode.
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL>
<LI><I>Note:</I> You should never need to change this statement.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000847">
<IMG SRC="RegVal.gif">
LocalTSRs specifies terminate-and-stay-resident (TSR) programs that can be copied to each instance of a virtual machine.
When Windows is started it detects any TSR programs that are currently running
<UL>
<LI>If any of the detected TSRs match a LocalTSRs= statement, Windows copies the TSR to each virtual machine.
<LI>
Many TSRs do not work properly when using this option.
</UL>
<UL><LI><I>Default value:</I> dosedit, ced</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000848">
<IMG SRC="RegVal.gif">
MouseInDosBox specifies whether the mouse can be used for non-Windows applications in a window.
<UL>
<LI>Mouse support is automatic for the Windows 3.1 version of the video grabbers. However, you need to set this statement to 1 if you are using a Windows 3.0 version of the grabbers.
<LI>
 In order for your mouse to work in non-Windows applications for either version of the video grabbers, you need to load a mouse device driver before starting Windows.
</UL>
<UL><LI><I>Default value:</I> 1</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000849">
<IMG SRC="RegVal.gif">
NetAsynchSwitching specifies whether you can switch away from a non-Windows application after it has made an asynchronous NetBIOS call. This statement only affects Windows Standard mode.
<UL>
<LI>NetAsynchSwitching=1 | 0
<LI>
When set to 0, Windows does not allow task switching. If an application makes asynchronous NetBIOS calls, a task switch can cause the system to fail. 
<LI>
If you are sure your applications do not receive network messages while you are switched away from them, set this statement to 1.
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000850">
<IMG SRC="RegVal.gif">
ScreenLines specifies the number of lines displayed on the screen when a non-Windows application runs.
Applications that specify a different screen mode overrides this statement.
<UL><LI><I>Default value:</I> 25</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000851">
<IMG SRC="RegVal.gif">
SwapDisk specifies the disk drive and directory to which Windows Standard mode swaps non-Windows applications.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000859">
<IMG SRC="RegVal.gif">
The Current Tip value specifies the number of the last tip that was displayed on the Norton Navigator Welcome screen.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000860">
<IMG SRC="RegVal.gif">
The Location value stores the full path to the folder in which the Norton Navigator files were installed.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000861">
<IMG SRC="RegKey.gif">
The Version1 key stores installation information for Version 1 of Norton Navigator.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000862">
<IMG SRC="RegKey.gif">
The Norton Taskbar key stores global information for the Norton Taskbar component of Norton Navigator.
<UL>
<LI>Norton Taskbar adds a multiple desktop capability to Windows, and provides a convenient application QuickLaunch area to the taskbar.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000863">
<IMG SRC="RegVal.gif">
The DefaultNNDesktop value stores the full path to the folder that describes the Norton Navigator desktop.
<UL>
<LI>Norton Taskbar lets you create multiple custom desktops and quickly switch between them. The Norton Navigator desktop comes with Norton Navigator, and includes shortcuts to the component programs of Norton Navigator.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000864">
<IMG SRC="RegKey.gif">
The SmartFolders key contains configuration information for Norton SmartFolders.
<UL>
<LI>Norton SmartFolders are a component of Norton Navigator that allow you to create folders that dynamically fill themselves with shortcuts to files you specify. You simply specify the types of files that a SmartFolder should contain, and the folder can be automatically updated periodically whenever a new file of the specified type is added to the system.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000865">
<IMG SRC="RegKey.gif">
The Folders key contains a subkey for each SmartFolder you have created.
<UL>
<LI>Norton SmartFolders are a component of Norton Navigator that allow you to create folders that dynamically fill themselves with shortcuts to files you specify. You simply specify the types of files that a SmartFolder should contain, and the folder can be automatically updated periodically whenever a new file of the specified type is added to the system.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000906">
<IMG SRC="RegVal.gif">
The skipCMOSTests key determines whether the CMOS test will be run during the Diagnose phase of the Norton Disk Doctor Utility.
<UL>
<LI>When Norton Disk Doctor can't diagnose the drive because of an invalid partition table or the use of third party partitioning software, users can set the option to skip this portion of diagnose. 
<LI>

<LI>
Set the binary value to 1 to skip the CMOS test.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000907">
<IMG SRC="RegVal.gif">
The skipPartitionTests key determines whether the partition test will be run during the Diagnose phase of the Norton Disk Doctor Utility.
<UL>
<LI>When Norton Disk Doctor can't diagnose the drive because of an invalid partition table or the use of third party partitioning software, users can set the option to skip this portion of diagnose. 
<LI>

<LI>
Set the binary value to 1 to skip the partition test.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000908">
<IMG SRC="RegVal.gif">
The skipCompressionTests key determines whether the CMOS test will be run during the Diagnose phase of the Norton Disk Doctor Utility.
<UL>
<LI>When Norton Disk Doctor can't diagnose the drive because of an invalid partition table or the use of third party partitioning software, users can set the option to skip this portion of diagnose. 
<LI>
Set the binary value to 1 to skip the compression test.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000909">
<IMG SRC="RegKey.gif">
The SPEEDISK Colors key holds values for custom colors or optional color settings for Speedisk Legend elements such as Used block or Swap file.  In order to restore the default colors for Speedisk, delete this key.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000890">
<IMG SRC="RegKey.gif">
The SearchTemplates key stores defined search criteria for later reuse in Norton FastFind.
<UL>
<LI>Norton Fast Find:<UL>
<LI>
is a component of Norton File Manager
<LI>
supports file and location sets (user-defined subsets of files and folders) which can be used to narrow the search area
<LI>
lets you save search criteria as defined searches for later reuse
<LI>
works together with Norton Indexing to dramatically speed up searching for specific text within files</UL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000891">
<IMG SRC="RegVal.gif">
The DisableSplashScreen value controls whether the Norton AntiVirus Auto-Protect splash (startup logo) screen is displayed.
<UL>
<LI>Auto-Protect is a feature of Norton AntiVirus that works in the background to protect your computer from viruses.
<LI>
Auto-Protect:<UL>
<LI>
Scans program files whenever they are used.
<LI>
Uses sophisticated Virus Sensor technology that monitors your computer for new viruses that have not yet been included in the Norton AntiVirus Virus List.
<LI>
Monitors your computer for virus-like activities (such as an attempt to format your hard disk) and warns you so you can prevent this behavior.</UL>
</UL>
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<UL>
<LI>To enable the Auto-Protect splash screen, set this DWORD value to 0.
<LI>To disable the Auto-Protect splash screen, set this DWORD value to 1.
<LI>To disable the main Norton AntiVirus splash screen, set the HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Clinic\DisableSplashScreen DWORD value to 1.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000893">
<IMG SRC="RegKey.gif">
The InternalSettings key contains configuration information for Norton AntiVirus Auto-Protect.
<UL>
<LI>Auto-Protect is a feature of Norton AntiVirus that works in the background to protect your computer from viruses.
<LI>
Auto-Protect:<UL>
<LI>
Scans program files whenever they are used.
<LI>
Uses sophisticated Virus Sensor technology that monitors your computer for new viruses that have not yet been included in the Norton AntiVirus Virus List.
<LI>
Monitors your computer for virus-like activities (such as an attempt to format your hard disk) and warns you so you can prevent this behavior.</UL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000892">
<IMG SRC="RegVal.gif">
Dibeng.drv is the Device Independent Bitmap  DLL  that  supports many Windows 95-based video and printer drivers.
<UL>
<LI>dibeng.drv=dibeng.dll
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000894">
<IMG SRC="RegVal.gif">
The ShowUIWhileScanningBoot value controls whether an Auto-Protect message is displayed onscreen while Norton AntiVirus is scanning for viruses during system shutdown.
<UL>
<LI>Some video drivers interact with the Auto-Protect shutdown message to cause the system to appear to hang during shutdown. Turning off this message avoids the problem while still allowing your system to be scanned for viruses during shutdown.
</UL>
<UL><LI><I>Default value:</I> 1</UL>
<UL><LI><I>Valid range:</I> 1-0</UL>
<UL>
<LI>To turn on the Auto-Protect shutdown message, set this DWORD value to 1.
<LI>To turn off the Auto-Protect shutdown message, set this DWORD value to 0.
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000895">
<IMG SRC="RegVal.gif">
gdi.exe is the Windows Graphics Device Interface (GDI) which provides device-independent support for generating raster graphics.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000896">
<IMG SRC="RegVal.gif">
The RegisterApplyTimeForAgent value works with the ExecuteAgent value to control wether the Norton Anti-Virus Auto-Protect user interface is loaded before or after you log in.
<UL>
<LI>By default the Auto-Protect user interface is loaded before you log in to the system. On some systems, this causes strange behavior that can be alleviated if the Auto-Protect user interface is loaded after you log in rather than before.
</UL>
<UL><LI><I>Default value:</I> 1</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<UL>
<LI>To restore the default loading behavior of the Auto-Protect user interface:
<OL>
<LI>set this DWORD value to 1
<LI>set the ExecuteAgent DWORD value to 1
</OL>
<LI>To have the Auto-Protect user interface load after you log in to Windows:
<OL>
<LI>set this DWORD value to 0
<LI>set the ExecuteAgent DWORD value to 0
</OL>
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000897">
<IMG SRC="RegVal.gif">
The ExecuteAgent value works with the RegisterApplyTimeForAgent value to control wether the Norton Anti-Virus Auto-Protect user interface is loaded before or after you log in.
<UL>
<LI>By default the Auto-Protect user interface is loaded before you log in to the system. On some systems, this causes strange behavior that can be alleviated if the Auto-Protect user interface is loaded after you log in rather than before.
</UL>
<UL><LI><I>Default value:</I> 1</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<UL>
<LI>To restore the default loading behavior of the Auto-Protect user interface:
<OL>
<LI>set this DWORD value to 1
<LI>set the RegisterApplyTimeForAgent DWORD value to 1
</OL>
<LI>To have the Auto-Protect user interface load after you log in to Windows:
<OL>
<LI>set this DWORD value to 0
<LI>set the RegisterApplyTimeForAgent DWORD value to 0
</OL>
</UL>
<UL>
<LI>You need to restart Windows for changes to take effect.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000898">
<IMG SRC="RegVal.gif">
The DisableSplashScreen value controls whether the Norton AntiVirus splash (startup logo) screen is displayed when you start Norton AntiVirus.
<UL><LI><I>Default value:</I> 0</UL>
<UL><LI><I>Valid range:</I> 0-1</UL>
<UL>
<LI>To enable the Norton AntiVirus splash screen, set this DWORD value to 0.
<LI>To disable the Norton AntiVirus splash screen, set this DWORD value to 1.
<LI>To disable the Norton AntiVirus Auto-Protect splash screen, set the HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Norton AntiVirus\Clinic\DisableSplashScreen value to 1.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000899">
<IMG SRC="RegKey.gif">
The Norton System Doctor key contains user-specific configuration settings for Norton System Doctor.
<UL>
<LI>Norton System Doctor helps keep your computer free of problems and running at peak efficiency. It continuously monitors your computer's operating environment, and can alert you immediately when conditions require attention. Norton System Doctor can fix many problems automatically, without interrupting your work.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you should not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000900">
<IMG SRC="RegKey.gif">
The System Genie key contains user-specific configuration information for Norton System Genie.
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you should not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000902">
<IMG SRC="RegVal.gif">
Specifies the order in which Program Manager displays groups, as well as the order groups are cycled through when you press Ctrl+Tab.
<UL>
<LI>Order=number,
<LI>
Each number value represents a Groupnumber= statement from the [Groups] section.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000903">
<IMG SRC="RegVal.gif">
Specifies the size and location of the Program Manager window and whether it is maximized.
<UL>
<LI>Window=number, number, number, number, 0 | 1
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000904">
<IMG SRC="RegVal.gif">
ATMWorkaround is added to win.ini by Windows Setup to ensure compatibiltiy with Adobe Type Manager fonts.
<UL>
<LI>ATMWorkaround=1
</UL>
<UL><LI><I>Default value:</I> 1</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000911">
<IMG SRC="RegKey.gif">
Add a new key called Drive Benchmark under the Drive key to enable disk perfomance benchmarking.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000930">
<IMG SRC="RegVal.gif">
WallPaperOriginY is the pixel value for selecting an alternate starting point for displaying a wallpaper bitmap.
<UL>
<LI>The upper left corner of your display is pixel value 1,1. You can set any X/Y coordinate you wish for a centered image.
<LI>
This will force a single bitmap to the coordinates you set.
</UL>
<UL>
<LI>To move a centered wallpaper image to another location on the screen
<OL>
<LI>Create  WallPaperOriginX and WallPaperOriginY string values under the desktop key.
<LI>Enter X/Y values for the two keys.
</OL>
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000931">
<IMG SRC="RegVal.gif">
The WallPaperStyle value determines the size and positon of wallpaper images on the desktop.
<UL>
<LI>Windows uses bitmap images to fill the display with a graphic.  The image is either repeated multiple times or centered on the screen.
</UL>
<UL>
<LI>To stretch a centered image to fill the screen, set WallPaperStyle to 2.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000932">
<IMG SRC="RegKey.gif">
The Norton Registry Advisor key contains subkeys for each branch of the Registry and the Windows INI files with pointers to  reference information displayed in the Advisor pane in Norton Registry Editor.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000933">
<IMG SRC="RegKey.gif">
The OnRamp key contains a record of the date and time of the last live update of Norton Utilities.
<UL>
<LI>The live update feature requires a modem and access to the internet.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000934">
<IMG SRC="RegKey.gif">
The Registry Tracker key contains configuration information and settings used by Norton Registry Tracker.
<UL>
<LI>Norton Registry Tracker allows you to monitor changes to selected Registry keys, INI files, data files, and text files.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000935">
<IMG SRC="RegKey.gif">
The Norton File Compare key and subkeys contain settings and configuration data used by the File Compare utility program.
<UL>
<LI>Norton File Compare provides side-by-side displays of two version of a file, highlighting the changes, additions, and deletions that have occurred.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000936">
<IMG SRC="RegKey.gif">
The Norton Registry Editor key and subkeys contain settings and configuration data used by the Registry Editor utility program.
<UL>
<LI>Norton Registry Editor allows you to directly access and edit Registry keys and values. Use Registry Editor to back up and restore, import and export Registry settings on local and networked PCs.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000937">
<IMG SRC="RegKey.gif">
The Norton Registry Tracker key and subkeys contain settings and configuration data used by the Registry Editor utility program.
<UL>
<LI>Norton Registry Tracker takes "snapshots" of INI files, data files, and selected registry keys and monitors subsequent changes to these files.
</UL>
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000938">
<IMG SRC="RegKey.gif">
The Display key contains settings controlling whether display component data is included in Sytem Information reports.
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000939">
<IMG SRC="RegKey.gif">
The Drive key contains settings controlling whether drive data is included in Sytem Information reports, which local and network drives are tested, and whether the reports include detailed information or summary data only.
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000941">
<IMG SRC="RegKey.gif">
The Input key contains settings controlling whether input component data is included in Sytem Information reports.
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000942">
<IMG SRC="RegKey.gif">
The Memory key contains settings controlling whether detailed or summary data on the use of system RAM  is included in Sytem Information reports.
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000943">
<IMG SRC="RegKey.gif">
The Multimedia  key contains settings controlling whether multimedia component data is included in Sytem Information reports.
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000944">
<IMG SRC="RegKey.gif">
The Network key contains settings controlling whether network data is included in Sytem Information reports, whether unattached Netware servers are reported, and whether the reports include detailed information or summary data only.
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000945">
<IMG SRC="RegKey.gif">
The Printer key contains settings controlling whether information about attached printers is included in Sytem Information reports.
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000946">
<IMG SRC="RegKey.gif">
The System key contains settings controlling whether system data is included in Sytem Information reports, whether the system benchmark chart is included, and whether the reports include detailed information or summary data only.
<UL>
<LI><I>Note:</I> Norton Utilities is completely configurable from within the various Norton Utilities programs. Under most conditions, you do not need to change the Norton Utilities Registry settings directly in the Registry.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000947">
<IMG SRC="RegKey.gif">
The control.ini file contains Windows and desktop appearance settings, as well as component settings configured through the control panel.
<UL>
<LI>Win16 applications rely on configuration data included in the INI files. Many of the INI file settings are maintained by Windows 95 for compatibility reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000948">
<IMG SRC="RegKey.gif">
The system.ini file settings record the state of hardware and device drivers as well as some user preferences.
<UL>
<LI>Win16 applications rely on configuration data included in the INI files. Many of the INI file settings are maintained by Windows 95 for compatibility reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000949">
<IMG SRC="RegKey.gif">
The win.ini file contains settings that contol Windows appearance, application compatibily, I/O ports, file associations, OLE data, and more.
<UL>
<LI>Win16 applications rely on configuration data included in the INI files. Many of the INI file settings are maintained by Windows 95 for compatibility reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000950">
<IMG SRC="RegKey.gif">
The winfile.ini file contains Windows File Manager settings.
<UL>
<LI>Win16 applications rely on configuration data included in the INI files. Many of the INI file settings are maintained by Windows 95 for compatibility reasons.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000951">
<IMG SRC="RegKey.gif">
The * key contains subkeys for Windows shell extensions, context menu, and property sheet settings.
<UL>
<LI>Companion registy entries will be found under the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Shell Extensions key. 
<LI>
The Windows shell supports several types of extensions referred to as handlers which allow various operations to be performed with objects in the shell. 
<LI>
Norton Navigator is an example of an application that uses the Shell Extensions.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000952">
<IMG SRC="RegKey.gif">
The CLSID key contains the unique identifier subkeys that Windows uses to refer to specific objects.
<UL>
<LI>CLSID or class ID is Windows terminolgy for a Globally Unique Identifier, a 128 bit hexadecimal value.
</UL>
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000953">
<IMG SRC="RegKey.gif">
The Order key will determine the sequence the network providers are loaded when more than one network  protocol installed on your PC.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000954">
<IMG SRC="RegKey.gif">
The Microsoft key contains subkeys for user-preference settings for Microsoft applications including Windows.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000955">
<IMG SRC="RegKey.gif">
The Windows key contains subkeys for user-preference settings for Windows.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000956">
<IMG SRC="RegKey.gif">
The CurrentVersion key contains subkeys for user-preference settings for  Windows.
<!-- Norton End ><HR>
 
<!-- Norton Start = "0000957">
<IMG SRC="RegKey.gif">
The Explorer key contains subkeys for with pointers to user-specific application and file use, printer preferences, and other settings.
<!-- Norton End ><HR>
 
</BODY>
</HTML>